[rtems commit] bsp/lm3s69xx: Typos

[Sebastian Huber]

Module:    rtems
Branch:    master
Commit:    8bed60314e383fe461c03236857b9ba369beecd4
Changeset: http://git.rtems.org/rtems/commit/?id=8bed60314e383fe461c03236857b9ba369beecd4

Author:    Sebastian Huber <sebastian.huber at embedded-brains.de>
Date:      Mon Jun  3 10:03:44 2013 +0200

bsp/lm3s69xx: Typos

---

 .../libbsp/arm/lm3s69xx/console/console-config.c   |    2 +-
 c/src/lib/libbsp/arm/lm3s69xx/include/irq.h        |    4 ++--
 c/src/lib/libbsp/arm/lm3s69xx/startup/bspstart.c   |    4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/c/src/lib/libbsp/arm/lm3s69xx/console/console-config.c b/c/src/lib/libbsp/arm/lm3s69xx/console/console-config.c
index 474c02a..ad567ad 100644
--- a/c/src/lib/libbsp/arm/lm3s69xx/console/console-config.c
+++ b/c/src/lib/libbsp/arm/lm3s69xx/console/console-config.c
@@ -44,7 +44,7 @@ console_tbl Console_Configuration_Ports [] = {
       .ulClock = LM3S69XX_UART_BAUD,
       .ulIntVector = LM3S69XX_IRQ_UART_1,
       .pDeviceParams = (void *)1
-    }
+    },
   #endif
   #ifdef LM3S69XX_ENABLE_UART_2
     {
diff --git a/c/src/lib/libbsp/arm/lm3s69xx/include/irq.h b/c/src/lib/libbsp/arm/lm3s69xx/include/irq.h
index 00b570e..8ab9bcd 100644
--- a/c/src/lib/libbsp/arm/lm3s69xx/include/irq.h
+++ b/c/src/lib/libbsp/arm/lm3s69xx/include/irq.h
@@ -56,9 +56,9 @@
 #define LM3S69XX_IRQ_SYSTEM_CONTROL 28
 #define LM3S69XX_IRQ_FLASH_MEMORY_CONTROL 29
 #define LM3S69XX_IRQ_GPIO_PORT_F 30
-#define LM3S69XX_IRQ_GPIO PORT_G 31
+#define LM3S69XX_IRQ_GPIO_PORT_G 31
 /* NOTE: lm3s3749 */
-#define LM3S69XX_IRQ_GPIO PORT_H 32
+#define LM3S69XX_IRQ_GPIO_PORT_H 32
 #define LM3S69XX_IRQ_UART_2 33
 /* NOTE: lm3s3749 */
 #define LM3S69XX_IRQ_SSI_1 34
diff --git a/c/src/lib/libbsp/arm/lm3s69xx/startup/bspstart.c b/c/src/lib/libbsp/arm/lm3s69xx/startup/bspstart.c
index 23a04a5..442c713 100644
--- a/c/src/lib/libbsp/arm/lm3s69xx/startup/bspstart.c
+++ b/c/src/lib/libbsp/arm/lm3s69xx/startup/bspstart.c
@@ -57,8 +57,8 @@ static const lm3s69xx_gpio_config start_config_gpio[] = {
   LM3S69XX_PIN_UART_RX(LM3S69XX_PORT_B, 0),
   LM3S69XX_PIN_UART_TX(LM3S69XX_PORT_B, 1),
 #elif defined(LM3S69XX_MCU_LM3S6965)
-  LM3S69XX_PIN_UART_RX(LM3S69XX_PORT_D, 2);
-  LM3S69XX_PIN_UART_TX(LM3S69XX_PORT_D, 3);
+  LM3S69XX_PIN_UART_RX(LM3S69XX_PORT_D, 2),
+  LM3S69XX_PIN_UART_TX(LM3S69XX_PORT_D, 3),
 #else
 #error No GPIO pin configuration for UART 1
 #endif