[rtems-buildsys commit] Update to automake-1.13.2
Ralf Corsepius
ralf at rtems.org
Sat Jun 15 05:07:20 UTC 2013
Module: rtems-buildsys
Branch: master
Commit: ef93efceb963e7d5e57f73bdf8894e33ab6ba3d1
Changeset: http://git.rtems.org/rtems-buildsys/commit/?id=ef93efceb963e7d5e57f73bdf8894e33ab6ba3d1
Author: Ralf Corsépius <ralf.corsepius at rtems.org>
Date: Wed May 29 06:20:19 2013 +0200
Update to automake-1.13.2
---
rtems-mock/Makefile.in | 205 +++++++++++++++----------
rtems-mock/aclocal.m4 | 291 +++++++++++++++++++++++------------
rtems-mock/configure | 179 ++++++++++++++--------
rtems-mock/missing | 405 +++++++++++++++++-------------------------------
4 files changed, 577 insertions(+), 503 deletions(-)
diff --git a/rtems-mock/Makefile.in b/rtems-mock/Makefile.in
index 39a5544..a33c406 100644
--- a/rtems-mock/Makefile.in
+++ b/rtems-mock/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.12.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -17,23 +17,51 @@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -50,14 +78,14 @@ POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-DIST_COMMON = README $(am__configure_deps) $(nobase_make_HEADERS) \
+DIST_COMMON = $(srcdir)/etc/mock/makefile.am \
+ $(srcdir)/make/makefile.am $(srcdir)/buildgroups/makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/rtems-mock.spec.in $(nobase_make_HEADERS) \
$(nobase_mockdata_HEADERS) $(noinst_HEADERS) \
- $(pkg_perlmock_HEADERS) $(pkg_perlrpms_HEADERS) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/buildgroups/makefile.am \
- $(srcdir)/etc/mock/makefile.am $(srcdir)/make/makefile.am \
- $(srcdir)/rtems-mock.spec.in $(top_srcdir)/configure AUTHORS \
- COPYING ChangeLog INSTALL install-sh missing
+ $(pkg_perlmock_HEADERS) $(pkg_perlrpms_HEADERS) AUTHORS \
+ COPYING ChangeLog INSTALL README install-sh missing
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
@@ -103,6 +131,18 @@ am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(faileddir)" \
"$(DESTDIR)$(mockdatadir)" "$(DESTDIR)$(pkg_perlmockdir)" \
"$(DESTDIR)$(pkg_perlrpmsdir)"
SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_ at AM_V@)
+am__v_P_ = $(am__v_P_ at AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_ at AM_V@)
+am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_ at AM_V@)
+am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
@@ -116,6 +156,23 @@ DATA = $(failed_DATA) $(mockcfg_DATA) $(nobase_mockdata_DATA) \
HEADERS = $(nobase_make_HEADERS) $(nobase_mockdata_HEADERS) \
$(noinst_HEADERS) $(pkg_perlmock_HEADERS) \
$(pkg_perlrpms_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
@@ -139,6 +196,7 @@ am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -993,26 +1051,15 @@ uninstall-pkg_perlrpmsHEADERS:
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkg_perlrpmsdir)'; $(am__uninstall_files_from_dir)
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
@@ -1024,15 +1071,11 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
@@ -1041,18 +1084,16 @@ GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
-
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-
clean-cscope:
-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
-cscope.files: clean-cscope cscopelist
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
@@ -1346,32 +1387,32 @@ uninstall-am: uninstall-binSCRIPTS uninstall-failedDATA \
.MAKE: install-am install-data-am install-strip
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
- clean-cscope clean-generic cscope cscopelist ctags dist \
- dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
- dist-xz dist-zip distcheck distclean distclean-generic \
- distclean-tags distcleancheck distdir distuninstallcheck dvi \
- dvi-am html html-am info info-am install install-am \
- install-binSCRIPTS install-data install-data-am \
- install-data-hook install-data-local install-dvi \
- install-dvi-am install-exec install-exec-am install-failedDATA \
- install-html install-html-am install-info install-info-am \
- install-man install-mockcfgDATA install-nobase_makeHEADERS \
- install-nobase_mockdataDATA install-nobase_mockdataHEADERS \
- install-pdf install-pdf-am install-pkg_perlmockHEADERS \
- install-pkg_perlrpmsHEADERS install-pkgcfgDATA \
- install-pkglocalstateDATA install-ps install-ps-am \
- install-repotools_sysconfDATA install-resultDATA install-strip \
- install-tobuildDATA installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-binSCRIPTS uninstall-failedDATA \
- uninstall-mockcfgDATA uninstall-nobase_makeHEADERS \
- uninstall-nobase_mockdataDATA uninstall-nobase_mockdataHEADERS \
- uninstall-pkg_perlmockHEADERS uninstall-pkg_perlrpmsHEADERS \
- uninstall-pkgcfgDATA uninstall-pkglocalstateDATA \
- uninstall-repotools_sysconfDATA uninstall-resultDATA \
- uninstall-tobuildDATA
+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
+ clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \
+ dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \
+ dist-tarZ dist-xz dist-zip distcheck distclean \
+ distclean-generic distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-binSCRIPTS install-data \
+ install-data-am install-data-hook install-data-local \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-failedDATA install-html install-html-am install-info \
+ install-info-am install-man install-mockcfgDATA \
+ install-nobase_makeHEADERS install-nobase_mockdataDATA \
+ install-nobase_mockdataHEADERS install-pdf install-pdf-am \
+ install-pkg_perlmockHEADERS install-pkg_perlrpmsHEADERS \
+ install-pkgcfgDATA install-pkglocalstateDATA install-ps \
+ install-ps-am install-repotools_sysconfDATA install-resultDATA \
+ install-strip install-tobuildDATA installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+ tags-am uninstall uninstall-am uninstall-binSCRIPTS \
+ uninstall-failedDATA uninstall-mockcfgDATA \
+ uninstall-nobase_makeHEADERS uninstall-nobase_mockdataDATA \
+ uninstall-nobase_mockdataHEADERS uninstall-pkg_perlmockHEADERS \
+ uninstall-pkg_perlrpmsHEADERS uninstall-pkgcfgDATA \
+ uninstall-pkglocalstateDATA uninstall-repotools_sysconfDATA \
+ uninstall-resultDATA uninstall-tobuildDATA
bin/rtems-preprpms: bin/rtems-preprpms.in Makefile
@$(MKDIR_P) bin
diff --git a/rtems-mock/aclocal.m4 b/rtems-mock/aclocal.m4
index 7dc1212..2bfa58a 100644
--- a/rtems-mock/aclocal.m4
+++ b/rtems-mock/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.12.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.13.2 -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -11,6 +11,7 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
@@ -19,7 +20,7 @@ You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -31,10 +32,10 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.12'
+[am__api_version='1.13'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.12.6], [],
+m4_if([$1], [1.13.2], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -50,14 +51,14 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.12.6])dnl
+[AM_AUTOMAKE_VERSION([1.13.2])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -110,7 +111,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -143,7 +144,7 @@ fi])])
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -164,7 +165,7 @@ fi])])
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
+[AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -194,8 +195,7 @@ AC_SUBST([CYGPATH_W])
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
-[$0: two- and three-arguments forms are deprecated. For more info, see:
-http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
+ [$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
@@ -249,18 +249,15 @@ AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES([OBJC])],
[m4_define([AC_PROG_OBJC],
m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-dnl Support for Objective C++ was only introduced in Autoconf 2.65,
-dnl but we still cater to Autoconf 2.62.
-m4_ifdef([AC_PROG_OBJCXX],
-[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
[_AM_DEPENDENCIES([OBJCXX])],
[m4_define([AC_PROG_OBJCXX],
- m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
@@ -294,7 +291,7 @@ for _am_header in $config_headers :; do
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -315,7 +312,7 @@ if test x"${install_sh}" != xset; then
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2012 Free Software Foundation, Inc.
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -337,7 +334,7 @@ AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -370,11 +367,9 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
]
)
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -389,8 +384,8 @@ AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
@@ -403,8 +398,8 @@ if test x"${MISSING+set}" != xset; then
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
AC_MSG_WARN(['missing' script is too old or missing])
@@ -413,7 +408,7 @@ fi
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -442,7 +437,7 @@ AC_DEFUN([_AM_SET_OPTIONS],
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -461,7 +456,7 @@ AC_DEFUN([AM_RUN_LOG],
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -542,7 +537,67 @@ AC_CONFIG_COMMANDS_PRE(
rm -f conftest.file
])
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -570,7 +625,7 @@ fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006-2012 Free Software Foundation, Inc.
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -589,7 +644,7 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004-2012 Free Software Foundation, Inc.
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -608,76 +663,114 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/rtems-mock/configure b/rtems-mock/configure
index 40a1b78..f4395b9 100755
--- a/rtems-mock/configure
+++ b/rtems-mock/configure
@@ -601,6 +601,10 @@ LN_S
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
am__untar
am__tar
AMTAR
@@ -665,6 +669,7 @@ SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
+enable_silent_rules
enable_maintainer_mode
enable_repogroup
enable_ftphome
@@ -1287,6 +1292,8 @@ Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
@@ -1723,7 +1730,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-am__api_version='1.12'
+am__api_version='1.13'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -1936,8 +1943,8 @@ if test x"${MISSING+set}" != xset; then
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
@@ -2177,6 +2184,45 @@ else
fi
rmdir .tst 2>/dev/null
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
@@ -2240,86 +2286,94 @@ mkdir_p='$(MKDIR_P)'
AMTAR='$${TAR-tar}'
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a pax tar archive" >&5
-$as_echo_n "checking how to create a pax tar archive... " >&6; }
-# Loop over all known methods to create a tar archive until one works.
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar pax cpio none'
-_am_tools=${am_cv_prog_tar_pax-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- { echo "$as_me:$LINENO: $_am_tar --version" >&5
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a pax tar archive" >&5
+$as_echo_n "checking how to create a pax tar archive... " >&6; }
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_pax-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ { echo "$as_me:$LINENO: $_am_tar --version" >&5
($_am_tar --version) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && break
- done
- am__tar="$_am_tar --format=posix -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=posix -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x pax -w "$$tardir"'
- am__tar_='pax -L -x pax -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H pax -L'
- am__tar_='find "$tardir" -print | cpio -o -H pax -L'
- am__untar='cpio -i -H pax -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
+ done
+ am__tar="$_am_tar --format=posix -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=posix -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x pax -w "$$tardir"'
+ am__tar_='pax -L -x pax -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H pax -L'
+ am__tar_='find "$tardir" -print | cpio -o -H pax -L'
+ am__untar='cpio -i -H pax -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_pax}" && break
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_pax}" && break
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5
(tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
- rm -rf conftest.dir
- if test -s conftest.tar; then
- { echo "$as_me:$LINENO: $am__untar <conftest.tar" >&5
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ { echo "$as_me:$LINENO: $am__untar <conftest.tar" >&5
($am__untar <conftest.tar) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
+ { echo "$as_me:$LINENO: cat conftest.dir/file" >&5
+ (cat conftest.dir/file) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
-if ${am_cv_prog_tar_pax+:} false; then :
+ if ${am_cv_prog_tar_pax+:} false; then :
$as_echo_n "(cached) " >&6
else
am_cv_prog_tar_pax=$_am_tool
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_pax" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_pax" >&5
$as_echo "$am_cv_prog_tar_pax" >&6; }
@@ -2327,6 +2381,7 @@ $as_echo "$am_cv_prog_tar_pax" >&6; }
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
diff --git a/rtems-mock/missing b/rtems-mock/missing
index 9a55648..cdea514 100755
--- a/rtems-mock/missing
+++ b/rtems-mock/missing
@@ -1,10 +1,10 @@
#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-01-06.18; # UTC
+scriptversion=2012-06-26.16; # UTC
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -29,61 +29,33 @@ if test $# -eq 0; then
exit 1
fi
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, 'missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
+case $1 in
-msg="missing on your system"
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal touch file 'aclocal.m4'
- autoconf touch file 'configure'
- autoheader touch file 'config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all 'Makefile.in' files
- bison create 'y.tab.[ch]', if possible, from existing .[ch]
- flex create 'lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create 'lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create 'y.tab.[ch]', if possible, from existing .[ch]
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
@@ -98,228 +70,141 @@ Send bug reports to <bug-automake at gnu.org>."
;;
-*)
- echo 1>&2 "$0: Unknown '$1' option"
+ echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running '$TOOL --version' or '$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acinclude.m4' or '${configure_ac}'. You might want
- to install the Automake and Perl packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified '${configure_ac}'. You might want to install the
- Autoconf and GNU m4 packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acconfig.h' or '${configure_ac}'. You might want
- to install the Autoconf and GNU m4 packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
- You might want to install the Automake and Perl packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: '$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get '$1' as part of Autoconf from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: '$1' $msg. You should only need it if
- you modified a '.y' file. You may need the Bison package
- in order for those modifications to take effect. You can get
- Bison from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.l' file. You may need the Flex package
- in order for those modifications to take effect. You can get
- Flex from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- Help2man package in order for those modifications to take
- effect. You can get Help2man from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.texi' or '.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy 'make' (AIX,
- DU, IRIX). You might want to install the Texinfo package or
- the GNU make package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
- *)
- echo 1>&2 "\
-WARNING: '$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the 'README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing '$1' program."
- exit 1
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'automa4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
;;
-esac
-
-exit 0
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
More information about the vc
mailing list