[rtems-libbsd commit] usb: Import USB support from libusb

Sebastian Huber sebh at rtems.org
Fri May 15 13:50:21 UTC 2015


Module:    rtems-libbsd
Branch:    master
Commit:    278bc93a59d77cd302e59357ed89ed566519bb71
Changeset: http://git.rtems.org/rtems-libbsd/commit/?id=278bc93a59d77cd302e59357ed89ed566519bb71

Author:    Sebastian Huber <sebastian.huber at embedded-brains.de>
Date:      Mon Mar 16 21:39:14 2015 +0100

usb: Import USB support from libusb

---

 Makefile                                           |   5 +-
 freebsd/sys/dev/usb/controller/ehci.c              |   8 +
 freebsd/sys/dev/usb/controller/ehci.h              |   4 +
 libbsd.py                                          |   5 +-
 rtemsbsd/sys/dev/usb/controller/ehci_mpc83xx.c     |  43 +-
 rtemsbsd/sys/dev/usb/controller/ohci_lpc.c         | 656 +++++++++++++++++++++
 rtemsbsd/sys/dev/usb/controller/ohci_lpc24xx.c     | 228 -------
 rtemsbsd/sys/dev/usb/controller/ohci_lpc32xx.c     | 607 -------------------
 .../sys/dev/usb/controller/usb_otg_transceiver.c   | 306 ++++++++++
 .../dev/usb/controller/usb_otg_transceiver_dump.c  | 122 ++++
 rtemsbsd/sys/dev/usb/usb_otg_transceiver.h         | 131 ++++
 11 files changed, 1274 insertions(+), 841 deletions(-)

diff --git a/Makefile b/Makefile
index a94c836..68a0c7a 100644
--- a/Makefile
+++ b/Makefile
@@ -660,8 +660,9 @@ LIB_C_FILES += rtemsbsd/pppd/sys-rtems.c
 LIB_C_FILES += rtemsbsd/pppd/upap.c
 LIB_C_FILES += rtemsbsd/pppd/utils.c
 LIB_C_FILES += rtemsbsd/sys/dev/usb/controller/ehci_mpc83xx.c
-LIB_C_FILES += rtemsbsd/sys/dev/usb/controller/ohci_lpc24xx.c
-LIB_C_FILES += rtemsbsd/sys/dev/usb/controller/ohci_lpc32xx.c
+LIB_C_FILES += rtemsbsd/sys/dev/usb/controller/ohci_lpc.c
+LIB_C_FILES += rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver.c
+LIB_C_FILES += rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver_dump.c
 LIB_C_FILES += rtemsbsd/sys/dev/smc/if_smc_nexus.c
 LIB_C_FILES += rtemsbsd/sys/dev/ffec/if_ffec_mcf548x.c
 LIB_C_FILES += rtemsbsd/sys/dev/dw_mmc/dw_mmc.c
diff --git a/freebsd/sys/dev/usb/controller/ehci.c b/freebsd/sys/dev/usb/controller/ehci.c
index 528e4a0..730fd66 100644
--- a/freebsd/sys/dev/usb/controller/ehci.c
+++ b/freebsd/sys/dev/usb/controller/ehci.c
@@ -591,7 +591,11 @@ ehci_detach(ehci_softc_t *sc)
 	usb_callout_drain(&sc->sc_tmo_poll);
 }
 
+#ifndef __rtems__
 static void
+#else /* __rtems__ */
+void
+#endif /* __rtems__ */
 ehci_suspend(ehci_softc_t *sc)
 {
 	DPRINTF("stopping the HC\n");
@@ -600,7 +604,11 @@ ehci_suspend(ehci_softc_t *sc)
 	ehci_hcreset(sc);
 }
 
+#ifndef __rtems__
 static void
+#else /* __rtems__ */
+void
+#endif /* __rtems__ */
 ehci_resume(ehci_softc_t *sc)
 {
 	/* reset HC */
diff --git a/freebsd/sys/dev/usb/controller/ehci.h b/freebsd/sys/dev/usb/controller/ehci.h
index f718a8a..76ac75f 100644
--- a/freebsd/sys/dev/usb/controller/ehci.h
+++ b/freebsd/sys/dev/usb/controller/ehci.h
@@ -472,5 +472,9 @@ usb_error_t ehci_reset(ehci_softc_t *sc);
 usb_error_t ehci_init(ehci_softc_t *sc);
 void	ehci_detach(struct ehci_softc *sc);
 void	ehci_interrupt(ehci_softc_t *sc);
+#ifdef __rtems__
+void	ehci_suspend(ehci_softc_t *sc);
+void	ehci_resume(ehci_softc_t *sc);
+#endif /* __rtems__ */
 
 #endif					/* _EHCI_H_ */
diff --git a/libbsd.py b/libbsd.py
index 0128f57..815b4be 100755
--- a/libbsd.py
+++ b/libbsd.py
@@ -117,8 +117,9 @@ def rtems(mm):
             'pppd/upap.c',
             'pppd/utils.c',
             'sys/dev/usb/controller/ehci_mpc83xx.c',
-            'sys/dev/usb/controller/ohci_lpc24xx.c',
-            'sys/dev/usb/controller/ohci_lpc32xx.c',
+            'sys/dev/usb/controller/ohci_lpc.c',
+            'sys/dev/usb/controller/usb_otg_transceiver.c',
+            'sys/dev/usb/controller/usb_otg_transceiver_dump.c',
             'sys/dev/smc/if_smc_nexus.c',
             'sys/dev/ffec/if_ffec_mcf548x.c',
             'sys/dev/dw_mmc/dw_mmc.c',
diff --git a/rtemsbsd/sys/dev/usb/controller/ehci_mpc83xx.c b/rtemsbsd/sys/dev/usb/controller/ehci_mpc83xx.c
index e82e6a5..10127db 100644
--- a/rtemsbsd/sys/dev/usb/controller/ehci_mpc83xx.c
+++ b/rtemsbsd/sys/dev/usb/controller/ehci_mpc83xx.c
@@ -87,6 +87,36 @@
 static device_probe_t ehci_mpc83xx_probe;
 static device_attach_t ehci_mpc83xx_attach;
 static device_detach_t ehci_mpc83xx_detach;
+static device_suspend_t ehci_mpc83xx_suspend;
+static device_resume_t ehci_mpc83xx_resume;
+
+static int
+ehci_mpc83xx_suspend(device_t self)
+{
+	ehci_softc_t *e = device_get_softc(self);
+	int eno = bus_generic_suspend(self);
+
+	if (eno != 0) {
+		return (eno);
+	}
+
+	ehci_suspend(e);
+
+	return (0);
+}
+
+static int
+ehci_mpc83xx_resume(device_t self)
+{
+	ehci_softc_t *e = device_get_softc(self);
+
+	ehci_resume(e);
+
+	bus_generic_resume(self);
+
+	return (0);
+}
+
 
 static int
 ehci_mpc83xx_probe(device_t self)
@@ -116,8 +146,12 @@ ehci_mpc83xx_phy_init(void)
 #ifdef __GEN83xx_BSP_h
 	volatile uint32_t *control = &mpc83xx.usb_dr.control;
 
+#ifdef BSP_USB_EHCI_MPC83XX_HAS_ULPI
+	*control = CONTROL_PHY_CLOCK_SEL;
+#else
 	*control = CONTROL_PLL_RESET | CONTROL_REFSEL(0x2U);
 	*control = CONTROL_UTMI_PHY_EN | CONTROL_REFSEL(0x2U);
+#endif
 
 	while ((*control & CONTROL_PHY_CLK_VALID) == 0) {
 		/* Wait for PLL */
@@ -146,8 +180,13 @@ ehci_mpc83xx_host_init(void)
 #ifdef __GEN83xx_BSP_h
 	mpc83xx.usb_dr.snoop1 = SNOOP_ADDR(0x0) | SNOOP_SIZE_2GB;
 	mpc83xx.usb_dr.snoop2 = SNOOP_ADDR(0x80000) | SNOOP_SIZE_2GB;
+#ifdef BSP_USB_EHCI_MPC83XX_HAS_ULPI
+	mpc83xx.usb_dr.control = CONTROL_PHY_CLOCK_SEL | CONTROL_USB_EN;
+	mpc83xx.usb_dr.portsc1 = htole32(PORTSC_PTS_ULPI);
+#else
 	mpc83xx.usb_dr.control = CONTROL_UTMI_PHY_EN | CONTROL_REFSEL(0x2) | CONTROL_USB_EN;
 	mpc83xx.usb_dr.portsc1 = htole32(PORTSC_PTS_UTMI);
+#endif
 #if 0
 	mpc83xx.usb_dr.pri_ctrl = 0xcU;
 	mpc83xx.usb_dr.age_cnt_thresh = 0x40U;
@@ -250,8 +289,8 @@ static device_method_t ehci_methods [] = {
 	DEVMETHOD(device_probe, ehci_mpc83xx_probe),
 	DEVMETHOD(device_attach, ehci_mpc83xx_attach),
 	DEVMETHOD(device_detach, ehci_mpc83xx_detach),
-	DEVMETHOD(device_suspend,bus_generic_suspend),
-	DEVMETHOD(device_resume, bus_generic_resume),
+	DEVMETHOD(device_suspend, ehci_mpc83xx_suspend),
+	DEVMETHOD(device_resume, ehci_mpc83xx_resume),
 	DEVMETHOD(device_shutdown, bus_generic_shutdown),
 
 	/* Bus interface */
diff --git a/rtemsbsd/sys/dev/usb/controller/ohci_lpc.c b/rtemsbsd/sys/dev/usb/controller/ohci_lpc.c
new file mode 100644
index 0000000..527561c
--- /dev/null
+++ b/rtemsbsd/sys/dev/usb/controller/ohci_lpc.c
@@ -0,0 +1,656 @@
+/*
+ * Copyright (c) 2009, 2013 embedded brains GmbH.  All rights reserved.
+ *
+ *  embedded brains GmbH
+ *  Dornierstr. 4
+ *  82178 Puchheim
+ *  Germany
+ *  <rtems at embedded-brains.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <machine/rtems-bsd-kernel-space.h>
+#include <machine/rtems-bsd-support.h>
+
+#include <bsp.h>
+
+#if defined(LIBBSP_ARM_LPC24XX_BSP_H) || defined(LIBBSP_ARM_LPC32XX_BSP_H)
+
+#include <bsp/irq.h>
+
+#ifdef LIBBSP_ARM_LPC24XX_BSP_H
+
+#include <bsp/io.h>
+#include <bsp/lpc24xx.h>
+
+#define LPC_USB_OHCI_BASE USBHC_BASE_ADDR
+
+#define LPC_USB_I2C_BASE USBOTG_I2C_BASE_ADDR
+
+#define LPC_OTG_CLK_CTRL OTG_CLK_CTRL
+
+#define LPC_OTG_CLK_STAT OTG_CLK_STAT
+
+#define LPC_USB_OHCI_IRQ LPC24XX_IRQ_USB
+
+static void lpc_usb_module_enable(void)
+{
+	rtems_status_code sc;
+
+	sc = lpc24xx_module_enable(
+		LPC24XX_MODULE_USB,
+		LPC24XX_MODULE_PCLK_DEFAULT
+	);
+	BSD_ASSERT_SC(sc);
+}
+
+static void lpc_usb_module_disable(void)
+{
+	rtems_status_code sc;
+
+	sc = lpc24xx_module_disable(LPC24XX_MODULE_USB);
+	BSD_ASSERT_SC(sc);
+}
+
+static void lpc_usb_pin_config(void)
+{
+	static const lpc24xx_pin_range pins [] = {
+		LPC24XX_PIN_USB_D_PLUS_1,
+		LPC24XX_PIN_USB_D_MINUS_1,
+		LPC24XX_PIN_USB_PPWR_1,
+		LPC24XX_PIN_USB_SCL_1,
+		LPC24XX_PIN_USB_SDA_1,
+		LPC24XX_PIN_TERMINAL
+	};
+
+	rtems_status_code sc;
+
+	sc = lpc24xx_pin_config(&pins [0], LPC24XX_PIN_SET_FUNCTION);
+	BSD_ASSERT_SC(sc);
+}
+
+static void lpc_usb_host_clock_enable(void)
+{
+	/* Nothing to do */
+}
+
+static void lpc_otg_status_and_control(void)
+{
+	OTG_STAT_CTRL = 0x3;
+}
+
+#endif /* LIBBSP_ARM_LPC24XX_BSP_H */
+
+#ifdef LIBBSP_ARM_LPC32XX_BSP_H
+
+#include <bsp/lpc32xx.h>
+
+#define LPC_USB_OHCI_BASE LPC32XX_BASE_USB
+
+#define LPC_USB_I2C_BASE (&LPC32XX_I2C_RX)
+
+#define LPC_OTG_CLK_CTRL LPC32XX_OTG_CLK_CTRL
+
+#define LPC_OTG_CLK_STAT LPC32XX_OTG_CLK_STAT
+
+#define LPC_USB_OHCI_IRQ LPC32XX_IRQ_USB_HOST
+
+#define USB_CTRL_SLAVE_HCLK_EN (1U << 24)
+#define USB_CTRL_I2C_EN (1U << 23)
+#define USB_CTRL_DEV_NEED_CLK_EN (1U << 22)
+#define USB_CTRL_HOST_NEED_CLK_EN (1U << 21)
+#define USB_CTRL_PC_MASK (0x3U << 19)
+#define USB_CTRL_PC_PULL_UP (0x0U << 19)
+#define USB_CTRL_PC_BUS_KEEPER (0x1U << 19)
+#define USB_CTRL_PC_NONE (0x2U << 19)
+#define USB_CTRL_PC_PULL_DOWN (0x3U << 19)
+#define USB_CTRL_CLKEN2 (1U << 18)
+#define USB_CTRL_CLKEN1 (1U << 17)
+#define USB_CTRL_POWER_UP (1U << 16)
+#define USB_CTRL_BYPASS (1U << 15)
+#define USB_CTRL_DIRECT (1U << 14)
+#define USB_CTRL_FEEDBACK (1U << 13)
+#define USB_CTRL_P_SHIFT 11
+#define USB_CTRL_P_MASK (0x3U << USB_CTRL_P_SHIFT)
+#define USB_CTRL_P_1 (0x0U << USB_CTRL_P_SHIFT)
+#define USB_CTRL_P_2 (0x1U << USB_CTRL_P_SHIFT)
+#define USB_CTRL_P_4 (0x2U << USB_CTRL_P_SHIFT)
+#define USB_CTRL_P_8 (0x3U << USB_CTRL_P_SHIFT)
+#define USB_CTRL_N_SHIFT 9
+#define USB_CTRL_N_MASK (0x3U << USB_CTRL_N_SHIFT)
+#define USB_CTRL_N_1 (0x0U << USB_CTRL_N_SHIFT)
+#define USB_CTRL_N_2 (0x1U << USB_CTRL_N_SHIFT)
+#define USB_CTRL_N_3 (0x2U << USB_CTRL_N_SHIFT)
+#define USB_CTRL_N_4 (0x3U << USB_CTRL_N_SHIFT)
+#define USB_CTRL_M_SHIFT 1
+#define USB_CTRL_M_MASK (0xffU << USB_CTRL_M_SHIFT)
+#define USB_CTRL_PLL_LOCK (1U << 0)
+
+static void lpc_usb_module_enable(void)
+{
+	LPC32XX_USB_DIV = 0xc;
+	LPC32XX_USB_CTRL = USB_CTRL_SLAVE_HCLK_EN
+		| USB_CTRL_PC_BUS_KEEPER
+		| USB_CTRL_CLKEN1
+		| USB_CTRL_POWER_UP
+		| USB_CTRL_P_2
+		| USB_CTRL_N_1
+		| (191U << USB_CTRL_M_SHIFT);
+	while ((LPC32XX_USB_CTRL & USB_CTRL_PLL_LOCK) == 0) {
+		/* Wait */
+	}
+	LPC32XX_USB_CTRL |= USB_CTRL_CLKEN2;
+}
+
+static void lpc_usb_module_disable(void)
+{
+	LPC32XX_OTG_CLK_CTRL = 0;
+	LPC32XX_USB_CTRL = USB_CTRL_PC_BUS_KEEPER;
+}
+
+static void lpc_usb_pin_config(void)
+{
+	/* Nothing to do */
+}
+
+static void lpc_usb_host_clock_enable(void)
+{
+	LPC32XX_USB_CTRL |= USB_CTRL_HOST_NEED_CLK_EN;
+}
+
+static void lpc_otg_status_and_control(void)
+{
+	LPC32XX_OTG_STAT_CTRL = 0x1;
+}
+
+#endif /* LIBBSP_ARM_LPC32XX_BSP_H */
+
+static rtems_interval lpc_usb_timeout_init(void)
+{
+	return rtems_clock_get_ticks_since_boot();
+}
+
+static bool lpc_usb_timeout_not_expired(rtems_interval start)
+{
+	rtems_interval elapsed = rtems_clock_get_ticks_since_boot() - start;
+
+	return elapsed < rtems_clock_get_ticks_per_second() / 10;
+}
+
+#define LPC_OTG_CLK_HOST BSP_BIT32(0)
+#define LPC_OTG_CLK_DEV BSP_BIT32(1)
+#define LPC_OTG_CLK_I2C BSP_BIT32(2)
+#define LPC_OTG_CLK_OTG BSP_BIT32(3)
+#define LPC_OTG_CLK_AHB BSP_BIT32(4)
+
+static int lpc_otg_clk_ctrl(uint32_t otg_clk_ctrl)
+{
+	rtems_interval start;
+	bool not_ok;
+
+	LPC_OTG_CLK_CTRL = otg_clk_ctrl;
+
+	start = lpc_usb_timeout_init();
+	while (
+		(not_ok = (LPC_OTG_CLK_STAT & otg_clk_ctrl) != otg_clk_ctrl)
+			&& lpc_usb_timeout_not_expired(start)
+	) {
+		/* Wait */
+	}
+
+	return not_ok ? EIO : 0;
+}
+
+#include <sys/cdefs.h>
+#include <sys/stdint.h>
+#include <sys/stddef.h>
+#include <sys/param.h>
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/bus.h>
+#include <sys/linker_set.h>
+#include <sys/module.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/condvar.h>
+#include <sys/sysctl.h>
+#include <sys/sx.h>
+#include <sys/unistd.h>
+#include <sys/callout.h>
+#include <sys/malloc.h>
+#include <sys/priv.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+
+#include <dev/usb/usb_core.h>
+#include <dev/usb/usb_busdma.h>
+#include <dev/usb/usb_process.h>
+#include <dev/usb/usb_util.h>
+
+#include <dev/usb/usb_controller.h>
+#include <dev/usb/usb_bus.h>
+#include <dev/usb/controller/ohci.h>
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_I2C_ADDR
+
+#define I2C_CTL_SRST (1U << 8)
+
+#define I2C_TX_DATA_MASK 0xffU
+#define I2C_TX_ADDR_SHIFT 1
+#define I2C_TX_ADDR_MASK 0x7fU
+#define I2C_TX_READ (1U << 0)
+#define I2C_TX_START (1U << 8)
+#define I2C_TX_STOP (1U << 9)
+
+#define I2C_STS_TDI (1U << 0)
+#define I2C_STS_AFI (1U << 1)
+#define I2C_STS_NAI (1U << 2)
+#define I2C_STS_RFE (1U << 9)
+
+typedef struct {
+	uint32_t rx_tx;
+	uint32_t sts;
+	uint32_t ctl;
+	uint32_t clkhi;
+	uint32_t clklo;
+} i2c_regs;
+
+static volatile i2c_regs *i2c =
+	(volatile i2c_regs *) LPC_USB_I2C_BASE;
+
+static int i2c_wait_for_receive_fifo_not_empty(void)
+{
+	rtems_interval start;
+	bool not_ok;
+
+	start = lpc_usb_timeout_init();
+	while (
+		(not_ok = (i2c->sts & I2C_STS_RFE) != 0)
+			&& lpc_usb_timeout_not_expired(start)
+	) {
+		/* Wait */
+	}
+
+	return not_ok ? EIO : 0;
+}
+
+static int i2c_wait_for_transaction_done(void)
+{
+	rtems_interval start;
+	bool not_ok;
+
+	start = lpc_usb_timeout_init();
+	while (
+		(not_ok = (i2c->sts & I2C_STS_TDI) == 0)
+			&& lpc_usb_timeout_not_expired(start)
+	) {
+		/* Wait */
+	}
+
+	return not_ok ? EIO : 0;
+}
+
+static int i2c_read(
+	const struct usb_otg_transceiver *self,
+	uint8_t reg_addr,
+	uint8_t *value
+)
+{
+	int eno;
+
+	i2c->ctl = I2C_CTL_SRST;
+
+	i2c->rx_tx = self->i2c_addr | I2C_TX_START;
+	i2c->rx_tx = reg_addr;
+	i2c->rx_tx = self->i2c_addr | I2C_TX_READ | I2C_TX_START;
+	i2c->rx_tx = I2C_TX_STOP;
+
+	eno = i2c_wait_for_receive_fifo_not_empty();
+
+	if (eno == 0) {
+		*value = (int) i2c->rx_tx;
+	}
+
+	return eno;
+}
+
+static int i2c_write(
+	const struct usb_otg_transceiver *self,
+	uint8_t reg_addr,
+	uint8_t value
+)
+{
+	int eno;
+
+	i2c->ctl = I2C_CTL_SRST;
+	i2c->sts = I2C_STS_TDI;
+
+	i2c->rx_tx = self->i2c_addr | I2C_TX_START;
+	i2c->rx_tx = reg_addr;
+	i2c->rx_tx = value | I2C_TX_STOP;
+
+	eno = i2c_wait_for_transaction_done();
+
+	return eno;
+}
+
+#endif /* BSP_USB_OTG_TRANSCEIVER_I2C_ADDR */
+
+static device_probe_t ohci_lpc_probe;
+static device_attach_t ohci_lpc_attach;
+static device_detach_t ohci_lpc_detach;
+static device_suspend_t ohci_lpc_suspend;
+static device_resume_t ohci_lpc_resume;
+
+static int
+ohci_lpc_otg_transceiver_suspend(ohci_softc_t *e)
+{
+	int eno = 0;
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_I2C_ADDR
+	if (eno == 0) {
+		eno = lpc_otg_clk_ctrl(
+			LPC_OTG_CLK_AHB | LPC_OTG_CLK_HOST | LPC_OTG_CLK_I2C
+		);
+	}
+
+	if (eno == 0) {
+		eno = usb_otg_transceiver_suspend(&e->sc_otg_trans);
+	}
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_DUMP
+	usb_otg_transceiver_dump(&e->sc_otg_trans);
+#endif /* BSP_USB_OTG_TRANSCEIVER_DUMP */
+
+	if (eno == 0) {
+		eno = lpc_otg_clk_ctrl(LPC_OTG_CLK_AHB | LPC_OTG_CLK_HOST);
+	}
+#endif /* BSP_USB_OTG_TRANSCEIVER_I2C_ADDR */
+
+	return eno;
+}
+
+static int
+ohci_lpc_suspend(device_t self)
+{
+	ohci_softc_t *e = device_get_softc(self);
+	int eno = bus_generic_suspend(self);
+
+	if (eno == 0) {
+		ohci_suspend(e);
+	}
+
+	return (eno);
+}
+
+static int
+ohci_lpc_resume(device_t self)
+{
+	ohci_softc_t *e = device_get_softc(self);
+	int eno = 0;
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_I2C_ADDR
+	if (eno == 0) {
+		eno = lpc_otg_clk_ctrl(
+			LPC_OTG_CLK_AHB | LPC_OTG_CLK_HOST | LPC_OTG_CLK_I2C
+		);
+	}
+
+	if (eno == 0) {
+		eno = usb_otg_transceiver_resume(&e->sc_otg_trans);
+	}
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_VBUS
+	if (eno == 0) {
+		eno = usb_otg_transceiver_set_vbus(
+			&e->sc_otg_trans,
+			BSP_USB_OTG_TRANSCEIVER_VBUS
+		);
+	}
+#endif /* BSP_USB_OTG_TRANSCEIVER_VBUS */
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_DUMP
+	usb_otg_transceiver_dump(&e->sc_otg_trans);
+#endif /* BSP_USB_OTG_TRANSCEIVER_DUMP */
+
+	if (eno == 0) {
+		eno = lpc_otg_clk_ctrl(LPC_OTG_CLK_AHB | LPC_OTG_CLK_HOST);
+	}
+#endif /* BSP_USB_OTG_TRANSCEIVER_I2C_ADDR */
+
+	if (eno == 0) {
+		ohci_resume(e);
+
+		eno = bus_generic_resume(self);
+	}
+
+	return (eno);
+}
+
+static int
+ohci_lpc_probe(device_t self)
+{
+	device_set_desc(self, "LPC OHCI controller");
+
+	return (0);
+}
+
+static int
+ohci_lpc_attach(device_t self)
+{
+	rtems_status_code sc = RTEMS_SUCCESSFUL;
+	ohci_softc_t *e = device_get_softc(self);
+	usb_error_t ue = USB_ERR_NORMAL_COMPLETION;
+	int eno = 0;
+
+	memset(e, 0, sizeof(*e));
+
+	/* Initialize some bus fields */
+	e->sc_bus.parent = self;
+	e->sc_bus.devices = e->sc_devices;
+	e->sc_bus.devices_max = OHCI_MAX_DEVICES;
+
+	/* Get all DMA memory */
+	if (usb_bus_mem_alloc_all(&e->sc_bus, USB_GET_DMA_TAG(self), &ohci_iterate_hw_softc)) {
+		return (ENOMEM);
+	}
+	e->sc_dev = self;
+
+	/* Child device */
+	e->sc_bus.bdev = device_add_child(self, "usbus", -1);
+	if (e->sc_bus.bdev == NULL) {
+		device_printf(self, "Could not add USB device\n");
+		goto error;
+	}
+	device_set_ivars(e->sc_bus.bdev, &e->sc_bus);
+	device_set_desc(e->sc_bus.bdev, "LPC OHCI bus");
+	snprintf(e->sc_vendor, sizeof(e->sc_vendor), "NXP");
+
+	/* Register space */
+	e->sc_io_tag = 0U;
+	e->sc_io_hdl = LPC_USB_OHCI_BASE;
+	e->sc_io_size = 0x5cU;
+
+	lpc_usb_module_enable();
+
+	eno = lpc_otg_clk_ctrl(LPC_OTG_CLK_AHB | LPC_OTG_CLK_I2C);
+	if (eno != 0) {
+		goto error;
+	}
+
+	lpc_usb_pin_config();
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_I2C_ADDR
+	e->sc_otg_trans.read = i2c_read;
+	e->sc_otg_trans.write = i2c_write;
+	e->sc_otg_trans.i2c_addr = BSP_USB_OTG_TRANSCEIVER_I2C_ADDR;
+	eno = usb_otg_transceiver_init(&e->sc_otg_trans);
+	if (eno != 0) {
+		goto error;
+	}
+
+#ifdef BSP_USB_OTG_TRANSCEIVER_DUMP
+	usb_otg_transceiver_dump(&e->sc_otg_trans);
+#endif /* BSP_USB_OTG_TRANSCEIVER_DUMP */
+
+	eno = usb_otg_transceiver_resume(&e->sc_otg_trans);
+	if (eno != 0) {
+		goto error;
+	}
+#endif /* BSP_USB_OTG_TRANSCEIVER_I2C_ADDR */
+
+	lpc_usb_host_clock_enable();
+
+	eno = lpc_otg_clk_ctrl(
+		LPC_OTG_CLK_AHB | LPC_OTG_CLK_HOST
+			| LPC_OTG_CLK_I2C | LPC_OTG_CLK_OTG
+	);
+	if (eno != 0) {
+		goto error;
+	}
+
+	lpc_otg_status_and_control();
+
+#if defined(BSP_USB_OTG_TRANSCEIVER_I2C_ADDR) \
+	&& defined(BSP_USB_OTG_TRANSCEIVER_VBUS)
+	eno = usb_otg_transceiver_set_vbus(
+		&e->sc_otg_trans,
+		BSP_USB_OTG_TRANSCEIVER_VBUS
+	);
+	if (eno != 0) {
+		goto error;
+	}
+#endif /* defined(BSP_USB_OTG_TRANSCEIVER_I2C_ADDR)
+	  && defined(BSP_USB_OTG_TRANSCEIVER_VBUS) */
+
+#if defined(BSP_USB_OTG_TRANSCEIVER_I2C_ADDR) \
+	&& defined(BSP_USB_OTG_TRANSCEIVER_DUMP)
+	usb_otg_transceiver_dump(&e->sc_otg_trans);
+#endif /* defined(BSP_USB_OTG_TRANSCEIVER_I2C_ADDR)
+	  && defined(BSP_USB_OTG_TRANSCEIVER_DUMP) */
+
+	eno = lpc_otg_clk_ctrl(LPC_OTG_CLK_AHB | LPC_OTG_CLK_HOST);
+	if (eno != 0) {
+		goto error;
+	}
+
+	/* Install interrupt handler */
+	sc = rtems_interrupt_server_handler_install(
+		RTEMS_ID_NONE,
+		LPC_USB_OHCI_IRQ,
+		"USB",
+		RTEMS_INTERRUPT_UNIQUE,
+		(rtems_interrupt_handler) ohci_interrupt,
+		e
+	);
+	BSD_ASSERT_SC(sc);
+
+	/* OHCI intitialization */
+	ue = ohci_init(e);
+	if (ue != USB_ERR_NORMAL_COMPLETION) {
+		goto error;
+	}
+	e->sc_init_done = 1;
+
+	/* Probe and attach child */
+	eno = device_probe_and_attach(e->sc_bus.bdev);
+	if (eno != 0) {
+		goto error;
+	}
+
+	return (0);
+
+error:
+	ohci_lpc_detach(self);
+
+	return (ENXIO);
+}
+
+static int
+ohci_lpc_detach(device_t self)
+{
+	rtems_status_code sc = RTEMS_SUCCESSFUL;
+	ohci_softc_t *e = device_get_softc(self);
+
+	if (e->sc_bus.bdev) {
+		device_t bdev = e->sc_bus.bdev;
+
+		device_detach(bdev);
+		device_delete_child(self, bdev);
+	}
+
+	device_delete_all_children(self);
+
+	if (e->sc_init_done) {
+		ohci_detach(e);
+	}
+
+	sc = rtems_interrupt_server_handler_remove(
+		RTEMS_ID_NONE,
+		LPC_USB_OHCI_IRQ,
+		(rtems_interrupt_handler) ohci_interrupt,
+		e
+	);
+	BSD_ASSERT_SC(sc);
+
+	ohci_lpc_otg_transceiver_suspend(e);
+
+	lpc_otg_clk_ctrl(0);
+
+	lpc_usb_module_disable();
+
+	usb_bus_mem_free_all(&e->sc_bus, &ohci_iterate_hw_softc);
+
+	return (0);
+}
+
+static device_method_t ohci_methods [] = {
+	/* Device interface */
+	DEVMETHOD(device_probe, ohci_lpc_probe),
+	DEVMETHOD(device_attach, ohci_lpc_attach),
+	DEVMETHOD(device_detach, ohci_lpc_detach),
+	DEVMETHOD(device_suspend, ohci_lpc_suspend),
+	DEVMETHOD(device_resume, ohci_lpc_resume),
+	DEVMETHOD(device_shutdown, bus_generic_shutdown),
+
+	/* Bus interface */
+	DEVMETHOD(bus_print_child, bus_generic_print_child),
+
+	{0, 0}
+};
+
+static driver_t ohci_driver = {
+	.name = "ohci",
+	.methods = ohci_methods,
+	.size = sizeof(struct ohci_softc)
+};
+
+static devclass_t ohci_devclass;
+
+DRIVER_MODULE(ohci, nexus, ohci_driver, ohci_devclass, 0, 0);
+MODULE_DEPEND(ohci, usb, 1, 1, 1);
+
+#endif /* defined(LIBBSP_ARM_LPC24XX_BSP_H) || defined(LIBBSP_ARM_LPC32XX_BSP_H) */
diff --git a/rtemsbsd/sys/dev/usb/controller/ohci_lpc24xx.c b/rtemsbsd/sys/dev/usb/controller/ohci_lpc24xx.c
deleted file mode 100644
index bfb3c8c..0000000
--- a/rtemsbsd/sys/dev/usb/controller/ohci_lpc24xx.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright (c) 2009-2012 embedded brains GmbH.  All rights reserved.
- *
- *  embedded brains GmbH
- *  Obere Lagerstr. 30
- *  82178 Puchheim
- *  Germany
- *  <rtems at embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- */
-
-#include <machine/rtems-bsd-kernel-space.h>
-
-#include <bsp.h>
-
-#ifdef LIBBSP_ARM_LPC24XX_BSP_H
-
-#include <bsp/irq.h>
-#include <bsp/io.h>
-#include <bsp/lpc24xx.h>
-
-#include <sys/cdefs.h>
-#include <sys/stdint.h>
-#include <sys/stddef.h>
-#include <rtems/bsd/sys/param.h>
-#include <sys/queue.h>
-#include <rtems/bsd/sys/types.h>
-#include <sys/systm.h>
-#include <sys/kernel.h>
-#include <sys/bus.h>
-#include <sys/linker_set.h>
-#include <sys/module.h>
-#include <rtems/bsd/sys/lock.h>
-#include <sys/mutex.h>
-#include <sys/condvar.h>
-#include <sys/sysctl.h>
-#include <sys/sx.h>
-#include <rtems/bsd/sys/unistd.h>
-#include <sys/callout.h>
-#include <sys/malloc.h>
-#include <sys/priv.h>
-
-#include <dev/usb/usb.h>
-#include <dev/usb/usbdi.h>
-
-#include <dev/usb/usb_core.h>
-#include <dev/usb/usb_busdma.h>
-#include <dev/usb/usb_process.h>
-#include <dev/usb/usb_util.h>
-
-#include <dev/usb/usb_controller.h>
-#include <dev/usb/usb_bus.h>
-#include <dev/usb/controller/ohci.h>
-
-static device_probe_t ohci_lpc24xx_probe;
-static device_attach_t ohci_lpc24xx_attach;
-static device_detach_t ohci_lpc24xx_detach;
-static device_suspend_t ohci_lpc24xx_suspend;
-static device_resume_t ohci_lpc24xx_resume;
-
-static int
-ohci_lpc24xx_suspend(device_t self)
-{
-	ohci_softc_t *e = device_get_softc(self);
-	int eno = bus_generic_suspend(self);
-
-	if (eno != 0) {
-		return (eno);
-	}
-
-	ohci_suspend(e);
-
-	return (0);
-}
-
-static int
-ohci_lpc24xx_resume(device_t self)
-{
-	ohci_softc_t *e = device_get_softc(self);
-
-	ohci_resume(e);
-
-	bus_generic_resume(self);
-
-	return (0);
-}
-
-
-static int
-ohci_lpc24xx_probe(device_t self)
-{
-	device_set_desc(self, "LPC24XX OHCI controller");
-
-	return (0);
-}
-
-static int
-ohci_lpc24xx_attach(device_t self)
-{
-	static const lpc24xx_pin_range pins [] = {
-		LPC24XX_PIN_USB_D_PLUS_1,
-		LPC24XX_PIN_USB_D_MINUS_1,
-		LPC24XX_PIN_USB_PPWR_1,
-		LPC24XX_PIN_TERMINAL
-	};
-
-	rtems_status_code sc = RTEMS_SUCCESSFUL;
-	ohci_softc_t *e = device_get_softc(self);
-	usb_error_t ue = USB_ERR_NORMAL_COMPLETION;
-	int eno = 0;
-
-	memset(e, 0, sizeof(*e));
-
-	BSD_PRINTF("XXX\n");
-
-	/* Initialize some bus fields */
-	e->sc_bus.parent = self;
-	e->sc_bus.devices = e->sc_devices;
-	e->sc_bus.devices_max = OHCI_MAX_DEVICES;
-
-	/* Get all DMA memory */
-	if (usb_bus_mem_alloc_all(&e->sc_bus, USB_GET_DMA_TAG(self), &ohci_iterate_hw_softc)) {
-		return (ENOMEM);
-	}
-	e->sc_dev = self;
-
-	/* Child device */
-	e->sc_bus.bdev = device_add_child(self, "usbus", -1);
-	if (e->sc_bus.bdev == NULL) {
-		device_printf(self, "Could not add USB device\n");
-		goto error;
-	}
-	device_set_ivars(e->sc_bus.bdev, &e->sc_bus);
-	device_set_desc(e->sc_bus.bdev, "LPC24XX OHCI bus");
-	snprintf(e->sc_vendor, sizeof(e->sc_vendor), "NXP");
-
-	/* Register space */
-	e->sc_io_tag = 0U;
-	e->sc_io_hdl = USBHC_BASE_ADDR;
-	e->sc_io_size = 0x5cU;
-
-	/* Enable USB module */
-	sc = lpc24xx_module_enable(LPC24XX_MODULE_USB, LPC24XX_MODULE_PCLK_DEFAULT);
-	BSD_ASSERT_SC(sc);
-
-	/* Enable USB host and AHB clocks */
-	OTG_CLK_CTRL = 0x19;
-	while ((OTG_CLK_STAT & 0x19) != 0x19) {
-		/* Wait */
-	}
-
-	/* Set OTG Status and Control Register */
-	OTG_STAT_CTRL = 0x3;
-
-	/* Configure IO pins */
-	sc = lpc24xx_pin_config(&pins [0], LPC24XX_PIN_SET_FUNCTION);
-	BSD_ASSERT_SC(sc);
-
-	/* Install interrupt handler */
-	sc = rtems_interrupt_server_handler_install(
-		RTEMS_ID_NONE,
-		LPC24XX_IRQ_USB,
-		"USB",
-		RTEMS_INTERRUPT_UNIQUE,
-		(rtems_interrupt_handler) ohci_interrupt,
-		e
-	);
-	BSD_ASSERT_SC(sc);
-
-	/* OHCI intitialization */
-	ue = ohci_init(e);
-	if (ue != USB_ERR_NORMAL_COMPLETION) {
-		goto error;
-	}
-
-	/* Probe and attach child */
-	eno = device_probe_and_attach(e->sc_bus.bdev);
-	if (eno != 0) {
-		goto error;
-	}
-
-	return (0);
-
-error:
-	ohci_lpc24xx_detach(self);
-	return (ENXIO);
-}
-
-static int
-ohci_lpc24xx_detach(device_t self)
-{
-	ohci_softc_t *e = device_get_softc(self);
-
-	BSD_PRINTF("XXX\n");
-
-	return (0);
-}
-
-static device_method_t ohci_methods [] = {
-	/* Device interface */
-	DEVMETHOD(device_probe, ohci_lpc24xx_probe),
-	DEVMETHOD(device_attach, ohci_lpc24xx_attach),
-	DEVMETHOD(device_detach, ohci_lpc24xx_detach),
-	DEVMETHOD(device_suspend, ohci_lpc24xx_suspend),
-	DEVMETHOD(device_resume, ohci_lpc24xx_resume),
-	DEVMETHOD(device_shutdown, bus_generic_shutdown),
-
-	/* Bus interface */
-	DEVMETHOD(bus_print_child, bus_generic_print_child),
-
-	{0, 0}
-};
-
-static driver_t ohci_driver = {
-	.name = "ohci",
-	.methods = ohci_methods,
-	.size = sizeof(struct ohci_softc)
-};
-
-static devclass_t ohci_devclass;
-
-DRIVER_MODULE(ohci, nexus, ohci_driver, ohci_devclass, 0, 0);
-MODULE_DEPEND(ohci, usb, 1, 1, 1);
-
-#endif /* LIBBSP_ARM_LPC24XX_BSP_H */
diff --git a/rtemsbsd/sys/dev/usb/controller/ohci_lpc32xx.c b/rtemsbsd/sys/dev/usb/controller/ohci_lpc32xx.c
deleted file mode 100644
index 264f961..0000000
--- a/rtemsbsd/sys/dev/usb/controller/ohci_lpc32xx.c
+++ /dev/null
@@ -1,607 +0,0 @@
-/*
- * Copyright (c) 2009-2012 embedded brains GmbH.  All rights reserved.
- *
- *  embedded brains GmbH
- *  Obere Lagerstr. 30
- *  82178 Puchheim
- *  Germany
- *  <rtems at embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- */
-
-#include <machine/rtems-bsd-kernel-space.h>
-
-#include <bsp.h>
-
-#ifdef LIBBSP_ARM_LPC32XX_BSP_H
-
-#include <bsp/irq.h>
-#include <bsp/lpc32xx.h>
-
-#include <sys/cdefs.h>
-#include <sys/stdint.h>
-#include <sys/stddef.h>
-#include <rtems/bsd/sys/param.h>
-#include <sys/queue.h>
-#include <rtems/bsd/sys/types.h>
-#include <sys/systm.h>
-#include <sys/kernel.h>
-#include <sys/bus.h>
-#include <sys/linker_set.h>
-#include <sys/module.h>
-#include <rtems/bsd/sys/lock.h>
-#include <sys/mutex.h>
-#include <sys/condvar.h>
-#include <sys/sysctl.h>
-#include <sys/sx.h>
-#include <rtems/bsd/sys/unistd.h>
-#include <sys/callout.h>
-#include <sys/malloc.h>
-#include <sys/priv.h>
-
-#include <dev/usb/usb.h>
-#include <dev/usb/usbdi.h>
-
-#include <dev/usb/usb_core.h>
-#include <dev/usb/usb_busdma.h>
-#include <dev/usb/usb_process.h>
-#include <dev/usb/usb_util.h>
-
-#include <dev/usb/usb_controller.h>
-#include <dev/usb/usb_bus.h>
-#include <dev/usb/controller/ohci.h>
-
-#define USB_CTRL_SLAVE_HCLK_EN (1U << 24)
-#define USB_CTRL_I2C_EN (1U << 23)
-#define USB_CTRL_DEV_NEED_CLK_EN (1U << 22)
-#define USB_CTRL_HOST_NEED_CLK_EN (1U << 21)
-#define USB_CTRL_PC_MASK (0x3U << 19)
-#define USB_CTRL_PC_PULL_UP (0x0U << 19)
-#define USB_CTRL_PC_BUS_KEEPER (0x1U << 19)
-#define USB_CTRL_PC_NONE (0x2U << 19)
-#define USB_CTRL_PC_PULL_DOWN (0x3U << 19)
-#define USB_CTRL_CLKEN2 (1U << 18)
-#define USB_CTRL_CLKEN1 (1U << 17)
-#define USB_CTRL_POWER_UP (1U << 16)
-#define USB_CTRL_BYPASS (1U << 15)
-#define USB_CTRL_DIRECT (1U << 14)
-#define USB_CTRL_FEEDBACK (1U << 13)
-#define USB_CTRL_P_SHIFT 11
-#define USB_CTRL_P_MASK (0x3U << USB_CTRL_P_SHIFT)
-#define USB_CTRL_P_1 (0x0U << USB_CTRL_P_SHIFT)
-#define USB_CTRL_P_2 (0x1U << USB_CTRL_P_SHIFT)
-#define USB_CTRL_P_4 (0x2U << USB_CTRL_P_SHIFT)
-#define USB_CTRL_P_8 (0x3U << USB_CTRL_P_SHIFT)
-#define USB_CTRL_N_SHIFT 9
-#define USB_CTRL_N_MASK (0x3U << USB_CTRL_N_SHIFT)
-#define USB_CTRL_N_1 (0x0U << USB_CTRL_N_SHIFT)
-#define USB_CTRL_N_2 (0x1U << USB_CTRL_N_SHIFT)
-#define USB_CTRL_N_3 (0x2U << USB_CTRL_N_SHIFT)
-#define USB_CTRL_N_4 (0x3U << USB_CTRL_N_SHIFT)
-#define USB_CTRL_M_SHIFT 1
-#define USB_CTRL_M_MASK (0xffU << USB_CTRL_M_SHIFT)
-#define USB_CTRL_PLL_LOCK (1U << 0)
-
-#define I2C_CTL_SRST (1U << 8)
-
-#define I2C_TX_DATA_MASK 0xffU
-#define I2C_TX_ADDR_SHIFT 1
-#define I2C_TX_ADDR_MASK 0x7fU
-#define I2C_TX_READ (1U << 0)
-#define I2C_TX_START (1U << 8)
-#define I2C_TX_STOP (1U << 9)
-
-#define I2C_STS_TDI (1U << 0)
-#define I2C_STS_AFI (1U << 1)
-#define I2C_STS_NAI (1U << 2)
-#define I2C_STS_RFE (1U << 9)
-
-#define PHY_VENDOR_ID_LOW 0x0U
-#define PHY_VENDOR_ID_HIGH 0x1U
-#define PHY_PRODUCT_ID_LOW 0x2U
-#define PHY_PRODUCT_ID_HIGH 0x3U
-#define PHY_MODE_CONTROL_1 0x4U
-#define PHY_MODE_CONTROL_1_SET 0x4U
-#define PHY_MODE_CONTROL_1_CLEAR 0x5U
-#define PHY_MODE_CONTROL_X 0x12U
-#define PHY_MODE_CONTROL_X_SET 0x12U
-#define PHY_MODE_CONTROL_X_CLEAR 0x13U
-#define PHY_OTG_CONTROL 0x6U
-#define PHY_OTG_CONTROL_SET 0x6U
-#define PHY_OTG_CONTROL_CLEAR 0x7U
-#define PHY_INTERRUPT_SOURCE 0x8U
-#define PHY_INTERRUPT_LATCH 0xaU
-#define PHY_INTERRUPT_LATCH_SET 0xaU
-#define PHY_INTERRUPT_LATCH_CLEAR 0xbU
-#define PHY_INTERRUPT_ENABLE_LOW 0xcU
-#define PHY_INTERRUPT_ENABLE_LOW_SET 0xcU
-#define PHY_INTERRUPT_ENABLE_LOW_CLEAR 0xdU
-#define PHY_INTERRUPT_ENABLE_HIGH 0xeU
-#define PHY_INTERRUPT_ENABLE_HIGH_SET 0xeU
-#define PHY_INTERRUPT_ENABLE_HIGH_CLEAR 0xfU
-
-// ISP130x Specific...
-#define ISP130x_VERSION_ID_LOW 0x14U
-#define ISP130x_VERSION_ID_HIGH 0x15U
-#define ISP130x_OTG_STATUS 0x10U
-
-// ISP1302 Specific...
-#define ISP1302_MISC_CONTROL_SET 0x18U
-#define ISP1302_MISC_CONTROL_CLEAR 0x19U
-
-
-#define PHY_MODE_CONTROL_1_SPEED_REG (1U << 0)
-#define PHY_MODE_CONTROL_1_SUSPEND_REG (1U << 1)
-#define PHY_MODE_CONTROL_1_DAT_SE0 (1U << 2)
-#define PHY_MODE_CONTROL_1_TRANSP_EN (1U << 3)
-#define PHY_MODE_CONTROL_1_BDIS_ACON_EN (1U << 4)
-#define PHY_MODE_CONTROL_1_OE_INT_EN (1U << 5)
-#define PHY_MODE_CONTROL_1_UART_EN (1U << 6)
-
-// MODE CONTROL 'X'
-//
-// On ISP130x  this is register MODE CONTROL 2
-// On STOTG04E this is register CONTROL 3
-//
-//  'rsrvd' = not available reserved bit.
-//  'diff'  = different functionality .
-//
-// Bit  Function              ISP1301      ISP1302       STOTG04E
-// --------------------------------------------------------------
-//  0   PWR_DN                  Y            Y             rsrvd
-//  1   SPD_SUSP_CTRL           Y           rsrvd          diff
-//  2   BI_DI                   Y           rsrvd           Y
-//  3   TRANSP_BDIR[0]          Y            Y              Y
-//  4   TRANSP_BDIR[1]          Y            Y              Y
-//  5   AUDIO_EN                Y            Y              Y
-//  6   PSW_OE                  Y            Y              Y
-//  7   EN2V7                   Y           rsrvd           Y
-
-
-//ISP1301 & ISP1302 (Reserved on STOTG04E)
-#define ISP130x_MODE_CONTROL_X_GLOBAL_PWR_DN (1U << 0)
-//ISP1301   (ISP1302 reserved bit!)
-#define ISP1301_MODE_CONTROL_X_SPD_SUSP_CTRL (1U << 1)
-//STOTG04E (Different functionality!)
-#define STOTG04E_MODE_CONTROL_X_RX_BIAS_EN ISP1301_MODE_CONTROL_X_SPD_SUSP_CTRL
-//ISP1301  (ISP1302 reserved bit!)
-#define ISP1301_MODE_CONTROL_X_BI_DI (1U << 2)
-//STOTG04E
-#define STOTG04E_MODE_CONTROL_X_BI_DI ISP1301_MODE_CONTROL_X_BI_DI
-//ISP1301, ISP1302 & STOTG04E common definitions.
-#define PHY_MODE_CONTROL_X_TRANSP_BDIR0 (1U << 3)
-#define PHY_MODE_CONTROL_X_TRANSP_BDIR1 (1U << 4)
-#define PHY_MODE_CONTROL_X_AUDIO_EN (1U << 5)
-#define PHY_MODE_CONTROL_X_PSW_OE (1U << 6)
-//ISP1301   (ISP1302 reserved bit.)
-#define ISP1301_MODE_CONTROL_X_EN2V7 (1U << 7)
-//STOTG04E
-#define STOTG04E_MODE_CONTROL_X_EN2V7 ISP1301_MODE_CONTROL_X_EN2V7
-
-
-// Note: STOTG04E Control register 2 = ISP130x OTG Control register
-#define PHY_OTG_CONTROL_DP_PULLUP (1U << 0)
-#define PHY_OTG_CONTROL_DM_PULLUP (1U << 1)
-#define PHY_OTG_CONTROL_DP_PULLDOWN (1U << 2)
-#define PHY_OTG_CONTROL_DM_PULLDOWN (1U << 3)
-#define PHY_OTG_CONTROL_ID_PULLDOWN (1U << 4)
-#define PHY_OTG_CONTROL_VBUS_DRV (1U << 5)
-#define PHY_OTG_CONTROL_VBUS_DISCHRG (1U << 6)
-#define PHY_OTG_CONTROL_VBUS_CHRG (1U << 7)
-
-#define PHY_ADDR (0x2cU << I2C_TX_ADDR_SHIFT)
-
-// ISP1302 Specific...
-#define ISP1302_MISC_CONTROL_REG_BYPASS_DIS (1U << 0)
-#define ISP1302_MISC_CONTROL_SRP_INIT (1U << 1)
-#define ISP1302_MISC_CONTROL_DP_WKPU_EN (1U << 2)
-#define ISP1302_MISC_CONTROL_IDPU_DIS (1U << 3)
-#define ISP1302_MISC_CONTROL_UART_2V8_EN (1U << 4)
-#define ISP1302_MISC_CONTROL_FORCE_DP_LOW (1U << 6)
-#define ISP1302_MISC_CONTROL_FORCE_DP_HIGH (1U << 7)
-
-// Product Indentifers.
-#define ISP1301_PRODUCT_ID   0x1301
-#define ISP1302_PRODUCT_ID   0x1302
-#define STOTG04E_PRODUCT_ID  0xA0C4
-
-
-
-typedef struct
-{
-  uint16_t VendorID;
-  uint16_t ProductID;
-  uint16_t VersionID;
-} phy_Details_Typ;
-
-static void
-i2c_wait_for_receive_fifo_not_empty(void)
-{
-	while ((LPC32XX_I2C_STS & I2C_STS_RFE) != 0) {
-		/* Wait */
-	}
-}
-
-static uint8_t
-phy_read(uint8_t reg)
-{
-	LPC32XX_I2C_CTL = I2C_CTL_SRST;
-
-	LPC32XX_I2C_TX = PHY_ADDR | I2C_TX_START;
-
-	LPC32XX_I2C_TX = reg;
-
-	LPC32XX_I2C_TX = PHY_ADDR | I2C_TX_READ | I2C_TX_START;
-
-	LPC32XX_I2C_TX = I2C_TX_STOP;
-
-	i2c_wait_for_receive_fifo_not_empty();
-
-	return (uint8_t) LPC32XX_I2C_RX;
-}
-
-static void
-i2c_wait_for_transaction_done(void)
-{
-	while ((LPC32XX_I2C_STS & I2C_STS_TDI) == 0) {
-		/* Wait */
-	}
-
-	LPC32XX_I2C_STS = I2C_STS_TDI;
-}
-
-static void
-phy_write(uint8_t reg, uint8_t val)
-{
-
-	LPC32XX_I2C_CTL = I2C_CTL_SRST;
-
-	LPC32XX_I2C_TX = PHY_ADDR | I2C_TX_START;
-
-	LPC32XX_I2C_TX = reg;
-
-	LPC32XX_I2C_TX = val | I2C_TX_STOP;
-
-	i2c_wait_for_transaction_done();
-}
-
-static phy_Details_Typ
- phy_GetDetails(void)
-{
-	phy_Details_Typ PhyDetails;
-
-	PhyDetails.VendorID  = (uint16_t)((phy_read(PHY_VENDOR_ID_HIGH) << 8) |
-		phy_read(PHY_VENDOR_ID_LOW));
-
-	PhyDetails.ProductID = (uint16_t)((phy_read(PHY_PRODUCT_ID_HIGH) << 8) |
-		phy_read(PHY_PRODUCT_ID_LOW));
-
-	if (PhyDetails.ProductID == STOTG04E_PRODUCT_ID)
-	{
-	  // STOTG04E - Does not support 'Version' thus default it here to 'zero'
-	  PhyDetails.VersionID = 0;
-	}
-	else
-	{
-	  PhyDetails.VersionID = (uint16_t)((phy_read(ISP130x_VERSION_ID_HIGH) << 8) |
-		phy_read(ISP130x_VERSION_ID_LOW));
-	}
-
-	return PhyDetails;
-}
-
-static char const *
-get_PhyNameString(uint16_t ProductID)
-{
-	static char const * const ISP1301  = "ISP1301";
-	static char const * const ISP1302  = "ISP1302";
-	static char const * const STOTG04E = "STOTG04E";
-	static char const * const UNKNOWN  = "Unknown!";
-	
-	char const * String_Ptr = ISP1301;
-	
-	switch (ProductID) {
-		case ISP1301_PRODUCT_ID:
-			String_Ptr = ISP1301;
-			break;
-		
-		case ISP1302_PRODUCT_ID:
-			String_Ptr = ISP1302;
-			break;
-		
-		case STOTG04E_PRODUCT_ID:
-			String_Ptr = STOTG04E;
-			break;
-		
-		default:
-			String_Ptr = UNKNOWN;
-			break;
-	}
-	
-	return String_Ptr;
-}
-
-static void
-phy_dump(void)
-{
-	phy_Details_Typ PhyDetails = phy_GetDetails();
-
-	switch (PhyDetails.ProductID) {
-		case ISP1301_PRODUCT_ID:
-		case ISP1302_PRODUCT_ID:
-			// ISP130x has extra OTG status register.
-			BSD_PRINTF(
-				"Registers: mc1 %02x, mc2 %02x, otgctrl %02x, otgsts %02x, isrc %02x, iltch %02x, ienl %02x, ienh %02x\n",
-				phy_read(PHY_MODE_CONTROL_1),
-				phy_read(PHY_MODE_CONTROL_X),
-				phy_read(PHY_OTG_CONTROL),
-				phy_read(ISP130x_OTG_STATUS),
-				phy_read(PHY_INTERRUPT_SOURCE),
-				phy_read(PHY_INTERRUPT_LATCH),
-				phy_read(PHY_INTERRUPT_ENABLE_LOW),
-				phy_read(PHY_INTERRUPT_ENABLE_HIGH)
-			);
-			break;
-
-		case STOTG04E_PRODUCT_ID:
-			// Control register 2 is 'otgctrl', control register 3 is equivalent ISP130x control register 2.
-			BSD_PRINTF(
-				"Registers: mc1 %02x, mc3 %02x, otgctrl %02x, isrc %02x, iltch %02x, ienl %02x, ienh %02x\n",
-				phy_read(PHY_MODE_CONTROL_1),
-				phy_read(PHY_MODE_CONTROL_X),
-				phy_read(PHY_OTG_CONTROL),
-				phy_read(PHY_INTERRUPT_SOURCE),
-				phy_read(PHY_INTERRUPT_LATCH),
-				phy_read(PHY_INTERRUPT_ENABLE_LOW),
-				phy_read(PHY_INTERRUPT_ENABLE_HIGH)
-			);
-			break;
-
-		default:
-			BSD_ASSERT_SC(RTEMS_UNSATISFIED);
-			break;
-	}
-}
-
-static void
-phy_configure(void)
-{
-	phy_Details_Typ PhyDetails = phy_GetDetails();
-
-	BSD_PRINTF(
-		"USB-PHY: %s  (vendor 0x%04x, product 0x%04x, version 0x%04x)\n",
-		get_PhyNameString(PhyDetails.ProductID),
-		PhyDetails.VendorID,
-		PhyDetails.ProductID,
-		PhyDetails.VersionID
-	);
-
-	phy_write(PHY_MODE_CONTROL_1_CLEAR, 0xff);
-	phy_write(PHY_MODE_CONTROL_1_SET, PHY_MODE_CONTROL_1_SPEED_REG);
-	phy_write(PHY_MODE_CONTROL_X_CLEAR, 0xff);
-
-	switch (PhyDetails.ProductID) {
-		case ISP1301_PRODUCT_ID:
-			phy_write(
-				PHY_MODE_CONTROL_X_SET,
-				ISP1301_MODE_CONTROL_X_BI_DI
-					| PHY_MODE_CONTROL_X_PSW_OE
-					| ISP1301_MODE_CONTROL_X_SPD_SUSP_CTRL
-			);
-			break;
-
-		case ISP1302_PRODUCT_ID:
-			// Do not set 'SPD_SUSP_CTRL' bit as per ISP1301 this bit is reserved in
-			// ISP1302, setting it will cause problems.
-			// also as we have cleared Control register 2 (above) we must reset the
-			// reserved BI_DI bit otherwise it will not work.
-			phy_write(
-				PHY_MODE_CONTROL_X_SET,
-				ISP1301_MODE_CONTROL_X_BI_DI | PHY_MODE_CONTROL_X_PSW_OE
-			);
-
-			// ISP1302 has an additonal register we should initialise it..
-			phy_write(ISP1302_MISC_CONTROL_CLEAR, 0xff);
-			phy_write(ISP1302_MISC_CONTROL_SET, ISP1302_MISC_CONTROL_UART_2V8_EN);
-			break;
-
-		case STOTG04E_PRODUCT_ID:
-			phy_write(
-				PHY_MODE_CONTROL_X_SET,
-				STOTG04E_MODE_CONTROL_X_BI_DI | PHY_MODE_CONTROL_X_PSW_OE
-			);
-			break;
-
-		default:
-			BSD_ASSERT_SC(RTEMS_UNSATISFIED);
-			break;
-	}
-
-	phy_write(PHY_OTG_CONTROL_CLEAR, 0xff);
-	phy_write(PHY_MODE_CONTROL_1_SET, PHY_MODE_CONTROL_1_DAT_SE0);
-	phy_write(PHY_OTG_CONTROL_SET, PHY_OTG_CONTROL_DM_PULLDOWN | PHY_OTG_CONTROL_DP_PULLDOWN);
-	phy_write(PHY_INTERRUPT_LATCH_CLEAR, 0xff);
-	phy_write(PHY_INTERRUPT_ENABLE_LOW_CLEAR, 0xff);
-	phy_write(PHY_INTERRUPT_ENABLE_HIGH_CLEAR, 0xff);
-}
-
-static void
-phy_vbus_on(void)
-{
-	phy_write(PHY_OTG_CONTROL_SET, PHY_OTG_CONTROL_VBUS_DRV);
-}
-
-static int
-ohci_lpc32xx_suspend(device_t self)
-{
-	ohci_softc_t *e = device_get_softc(self);
-	int eno = bus_generic_suspend(self);
-
-	if (eno != 0) {
-		return (eno);
-	}
-
-	ohci_suspend(e);
-
-	return (0);
-}
-
-static int
-ohci_lpc32xx_resume(device_t self)
-{
-	ohci_softc_t *e = device_get_softc(self);
-
-	ohci_resume(e);
-
-	bus_generic_resume(self);
-
-	return (0);
-}
-
-
-static int
-ohci_lpc32xx_probe(device_t self)
-{
-	device_set_desc(self, "LPC32XX OHCI controller");
-
-	return (0);
-}
-
-static int
-ohci_lpc32xx_detach(device_t self)
-{
-	BSD_PRINTF("FIXME\n");
-
-	return (0);
-}
-
-static int
-ohci_lpc32xx_attach(device_t self)
-{
-	rtems_status_code sc = RTEMS_SUCCESSFUL;
-	ohci_softc_t *e = device_get_softc(self);
-	usb_error_t ue = USB_ERR_NORMAL_COMPLETION;
-	int eno = 0;
-
-	memset(e, 0, sizeof(*e));
-
-	/* Initialize some bus fields */
-	e->sc_bus.parent = self;
-	e->sc_bus.devices = e->sc_devices;
-	e->sc_bus.devices_max = OHCI_MAX_DEVICES;
-
-	/* Get all DMA memory */
-	if (usb_bus_mem_alloc_all(&e->sc_bus, USB_GET_DMA_TAG(self), &ohci_iterate_hw_softc)) {
-		return (ENOMEM);
-	}
-	e->sc_dev = self;
-
-	/* Child device */
-	e->sc_bus.bdev = device_add_child(self, "usbus", -1);
-	if (e->sc_bus.bdev == NULL) {
-		device_printf(self, "Could not add USB device\n");
-		goto error;
-	}
-	device_set_ivars(e->sc_bus.bdev, &e->sc_bus);
-	device_set_desc(e->sc_bus.bdev, "LPC32XX OHCI bus");
-	snprintf(e->sc_vendor, sizeof(e->sc_vendor), "NXP");
-
-	/* Register space */
-	e->sc_io_tag = 0U;
-	e->sc_io_hdl = LPC32XX_BASE_USB;
-	e->sc_io_size = 0x5cU;
-
-	/* Enable USB PLL */
-	LPC32XX_USB_DIV = 0xc;
-	LPC32XX_USB_CTRL = USB_CTRL_SLAVE_HCLK_EN
-		| USB_CTRL_PC_BUS_KEEPER
-		| USB_CTRL_CLKEN1
-		| USB_CTRL_POWER_UP
-		| USB_CTRL_P_2
-		| USB_CTRL_N_1
-		| (191U << USB_CTRL_M_SHIFT);
-	while ((LPC32XX_USB_CTRL & USB_CTRL_PLL_LOCK) == 0) {
-		/* Wait */
-	}
-	LPC32XX_USB_CTRL |= USB_CTRL_CLKEN2;
-
-	/* Enable USB host and AHB clocks */
-	LPC32XX_OTG_CLK_CTRL = 0x1c;
-	while ((LPC32XX_OTG_CLK_STAT & 0x1c) != 0x1c) {
-		/* Wait */
-	}
-
-	phy_configure();
-
-	LPC32XX_USB_CTRL |= USB_CTRL_HOST_NEED_CLK_EN;
-
-	LPC32XX_OTG_CLK_CTRL = 0x1d;
-	while ((LPC32XX_OTG_CLK_STAT & 0x1d) != 0x1d) {
-		/* Wait */
-	}
-
-	/* Set OTG Status and Control Register */
-	LPC32XX_OTG_STAT_CTRL = 0x1;
-
-	phy_vbus_on();
-
-	/* Install interrupt handler */
-	sc = rtems_interrupt_server_handler_install(
-		RTEMS_ID_NONE,
-		LPC32XX_IRQ_USB_HOST,
-		"USB",
-		RTEMS_INTERRUPT_UNIQUE,
-		(rtems_interrupt_handler) ohci_interrupt,
-		e
-	);
-	BSD_ASSERT_SC(sc);
-
-	/* OHCI intitialization */
-	ue = ohci_init(e);
-	if (ue != USB_ERR_NORMAL_COMPLETION) {
-		goto error;
-	}
-
-	/* Probe and attach child */
-	eno = device_probe_and_attach(e->sc_bus.bdev);
-	if (eno != 0) {
-		goto error;
-	}
-
-	return (0);
-
-error:
-	ohci_lpc32xx_detach(self);
-	return (ENXIO);
-}
-
-static device_method_t ohci_methods [] = {
-	/* Device interface */
-	DEVMETHOD(device_probe, ohci_lpc32xx_probe),
-	DEVMETHOD(device_attach, ohci_lpc32xx_attach),
-	DEVMETHOD(device_detach, ohci_lpc32xx_detach),
-	DEVMETHOD(device_suspend, ohci_lpc32xx_suspend),
-	DEVMETHOD(device_resume, ohci_lpc32xx_resume),
-	DEVMETHOD(device_shutdown, bus_generic_shutdown),
-
-	/* Bus interface */
-	DEVMETHOD(bus_print_child, bus_generic_print_child),
-
-	{0, 0}
-};
-
-static driver_t ohci_driver = {
-	.name = "ohci",
-	.methods = ohci_methods,
-	.size = sizeof(struct ohci_softc)
-};
-
-static devclass_t ohci_devclass;
-
-DRIVER_MODULE(ohci, nexus, ohci_driver, ohci_devclass, 0, 0);
-MODULE_DEPEND(ohci, usb, 1, 1, 1);
-
-#endif /* LIBBSP_ARM_LPC32XX_BSP_H */
diff --git a/rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver.c b/rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver.c
new file mode 100644
index 0000000..688291d
--- /dev/null
+++ b/rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver.c
@@ -0,0 +1,306 @@
+/*
+ * Copyright (c) 2012 embedded brains GmbH.  All rights reserved.
+ *
+ *  embedded brains GmbH
+ *  Dornierstr. 4
+ *  82178 Puchheim
+ *  Germany
+ *  <info at embedded-brains.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dev/usb/usb_otg_transceiver.h>
+
+#define COUNT(array) (sizeof(array) / sizeof(array [0]))
+
+#define USB_OTG_CONTROL_1_SPEED_REG (1 << 0)
+#define USB_OTG_CONTROL_1_SUSPEND_REG (1 << 1)
+#define USB_OTG_CONTROL_1_DAT_SE0 (1 << 2)
+#define USB_OTG_CONTROL_1_TRANSP_EN (1 << 3)
+#define USB_OTG_CONTROL_1_BDIS_ACON_EN (1 << 4)
+#define USB_OTG_CONTROL_1_OE_INT_EN (1 << 5)
+#define USB_OTG_CONTROL_1_UART_EN (1 << 6)
+
+/*
+ * USB_OTG_CONTROL_3
+ *
+ * On ISP130x  this is register MODE CONTROL 2
+ * On STOTG04E this is register CONTROL 3
+ *
+ *  'rsrvd' = not available reserved bit.
+ *  'diff'  = different functionality.
+ *
+ * Bit  Function              ISP1301      ISP1302       STOTG04E
+ * --------------------------------------------------------------
+ *  0   PWR_DN                  Y            Y             rsrvd
+ *  1   SPD_SUSP_CTRL           Y           rsrvd          diff
+ *  2   BI_DI                   Y           rsrvd           Y
+ *  3   TRANSP_BDIR[0]          Y            Y              Y
+ *  4   TRANSP_BDIR[1]          Y            Y              Y
+ *  5   AUDIO_EN                Y            Y              Y
+ *  6   PSW_OE                  Y            Y              Y
+ *  7   EN2V7                   Y           rsrvd           Y
+ */
+
+/* ISP1301 & ISP1302 (Reserved on STOTG04E) */
+#define ISP130x_CONTROL_3_GLOBAL_PWR_DN (1 << 0)
+/* ISP1301   (ISP1302 reserved bit!) */
+#define ISP1301_CONTROL_3_SPD_SUSP_CTRL (1 << 1)
+/* STOTG04E (Different functionality!) */
+#define STOTG04E_CONTROL_3_RX_BIAS_EN ISP1301_CONTROL_3_SPD_SUSP_CTRL
+/* ISP1301  (ISP1302 reserved bit!) */
+#define ISP1301_CONTROL_3_BI_DI (1 << 2)
+/* STOTG04E */
+#define STOTG04E_CONTROL_3_RC_BIAS_EN (1 << 1)
+#define STOTG04E_CONTROL_3_BIDI_EN ISP1301_CONTROL_3_BI_DI
+/* ISP1301, ISP1302 & STOTG04E common definitions. */
+#define USB_OTG_CONTROL_3_TRANSP_BDIR0 (1 << 3)
+#define USB_OTG_CONTROL_3_TRANSP_BDIR1 (1 << 4)
+#define USB_OTG_CONTROL_3_AUDIO_EN (1 << 5)
+#define USB_OTG_CONTROL_3_PSW_OE (1 << 6)
+/* ISP1301   (ISP1302 reserved bit.) */
+#define ISP1301_CONTROL_3_EN2V7 (1 << 7)
+/* STOTG04E */
+#define STOTG04E_CONTROL_3_2V7_EN ISP1301_CONTROL_3_EN2V7
+
+/* Note: STOTG04E Control register 2 = ISP130x OTG Control register */
+#define USB_OTG_CONTROL_2_DP_PULLUP (1 << 0)
+#define USB_OTG_CONTROL_2_DM_PULLUP (1 << 1)
+#define USB_OTG_CONTROL_2_DP_PULLDOWN (1 << 2)
+#define USB_OTG_CONTROL_2_DM_PULLDOWN (1 << 3)
+#define USB_OTG_CONTROL_2_ID_PULLDOWN (1 << 4)
+#define USB_OTG_CONTROL_2_VBUS_DRV (1 << 5)
+#define USB_OTG_CONTROL_2_VBUS_DISCHRG (1 << 6)
+#define USB_OTG_CONTROL_2_VBUS_CHRG (1 << 7)
+
+/* ISP1302 specific */
+#define ISP1302_MISC_CONTROL_REG_BYPASS_DIS (1 << 0)
+#define ISP1302_MISC_CONTROL_SRP_INIT (1 << 1)
+#define ISP1302_MISC_CONTROL_DP_WKPU_EN (1 << 2)
+#define ISP1302_MISC_CONTROL_IDPU_DIS (1 << 3)
+#define ISP1302_MISC_CONTROL_UART_2V8_EN (1 << 4)
+#define ISP1302_MISC_CONTROL_FORCE_DP_LOW (1 << 6)
+#define ISP1302_MISC_CONTROL_FORCE_DP_HIGH (1 << 7)
+
+int usb_otg_transceiver_read(
+	const struct usb_otg_transceiver *self,
+	const uint8_t *reg_addrs,
+	uint8_t *values,
+	size_t count
+)
+{
+	int eno = 0;
+	size_t i;
+
+	for (i = 0; eno == 0 && i < count; ++i) {
+		eno = (*self->read)(self, reg_addrs [i], &values [i]);
+	}
+
+	return eno;
+}
+
+int usb_otg_transceiver_write(
+	const struct usb_otg_transceiver *self,
+	const struct usb_otg_transceiver_write_request *requests,
+	size_t count
+)
+{
+	int eno = 0;
+	size_t i;
+
+	for (i = 0; eno == 0 && i < count; ++i) {
+		const struct usb_otg_transceiver_write_request *request = &requests [i];
+
+		eno = (*self->write)(self, request->reg_addr, request->value);
+	}
+
+	return eno;
+}
+
+int usb_otg_transceiver_init(struct usb_otg_transceiver *self)
+{
+	static const uint8_t reg_addrs [4] = {
+		USB_OTG_VENDOR_ID_LOW,
+		USB_OTG_VENDOR_ID_HIGH,
+		USB_OTG_PRODUCT_ID_LOW,
+		USB_OTG_PRODUCT_ID_HIGH
+	};
+
+	int eno;
+	uint8_t values [4];
+
+	eno = usb_otg_transceiver_read(self, reg_addrs, values, 4);
+	if (eno == 0) {
+		self->vendor_id = (uint16_t) ((values [1] << 8) | values [0]);
+		self->product_id = (uint16_t) ((values [3] << 8) | values [2]);
+	}
+
+	return eno;
+}
+
+#define RESUME_SETUP_REQUESTS \
+	{ USB_OTG_CONTROL_1_CLEAR, 0xff }, \
+	{ USB_OTG_CONTROL_1_SET, USB_OTG_CONTROL_1_SPEED_REG }, \
+	{ USB_OTG_CONTROL_3_CLEAR, 0xff }
+
+#define RESUME_FINALIZE_REQUESTS \
+	{ USB_OTG_CONTROL_2_CLEAR, 0xff }, \
+	{ USB_OTG_CONTROL_1_SET, USB_OTG_CONTROL_1_DAT_SE0 }, \
+	{ \
+		USB_OTG_CONTROL_2_SET, \
+		USB_OTG_CONTROL_2_DM_PULLDOWN | USB_OTG_CONTROL_2_DP_PULLDOWN \
+	}, \
+	{ USB_OTG_INT_LATCH_CLEAR, 0xff }, \
+	{ USB_OTG_INT_ENABLE_LOW_CLEAR, 0xff }, \
+	{ USB_OTG_INT_ENABLE_HIGH_CLEAR, 0xff }
+
+int usb_otg_transceiver_resume(const struct usb_otg_transceiver *self)
+{
+	static const struct usb_otg_transceiver_write_request
+	default_requests [] = {
+		RESUME_SETUP_REQUESTS,
+		RESUME_FINALIZE_REQUESTS
+	};
+
+	static const struct usb_otg_transceiver_write_request
+	isp1301_requests [] = {
+		RESUME_SETUP_REQUESTS,
+		{
+			USB_OTG_CONTROL_3_SET,
+			ISP1301_CONTROL_3_BI_DI
+				| USB_OTG_CONTROL_3_PSW_OE
+				| ISP1301_CONTROL_3_SPD_SUSP_CTRL
+		},
+		RESUME_FINALIZE_REQUESTS
+	};
+
+	static const struct usb_otg_transceiver_write_request
+	isp1302_requests [] = {
+		RESUME_SETUP_REQUESTS,
+		{
+			USB_OTG_CONTROL_3_SET,
+			ISP1301_CONTROL_3_BI_DI | USB_OTG_CONTROL_3_PSW_OE
+		}, {
+			ISP1302_MISC_CONTROL_CLEAR,
+			0xff
+		}, {
+			ISP1302_MISC_CONTROL_SET,
+			ISP1302_MISC_CONTROL_UART_2V8_EN
+		},
+		RESUME_FINALIZE_REQUESTS
+	};
+
+	static const struct usb_otg_transceiver_write_request
+	stotg04e_requests [] = {
+		RESUME_SETUP_REQUESTS,
+		{
+			USB_OTG_CONTROL_3_SET,
+			STOTG04E_CONTROL_3_BIDI_EN | USB_OTG_CONTROL_3_PSW_OE,
+		},
+		RESUME_FINALIZE_REQUESTS
+	};
+
+	int eno;
+	const struct usb_otg_transceiver_write_request *requests;
+	size_t count;
+
+	switch (self->product_id) {
+		case USB_OTG_PRODUCT_ID_ISP1301:
+			requests = isp1301_requests;
+			count = COUNT(isp1301_requests);
+			break;
+		case USB_OTG_PRODUCT_ID_ISP1302:
+			requests = isp1302_requests;
+			count = COUNT(isp1302_requests);
+			break;
+		case USB_OTG_PRODUCT_ID_STOTG04E:
+			requests = stotg04e_requests;
+			count = COUNT(stotg04e_requests);
+			break;
+		default:
+			requests = default_requests;
+			count = COUNT(default_requests);
+			break;
+	}
+
+	eno = usb_otg_transceiver_write(self, requests, count);
+
+	return eno;
+}
+
+int usb_otg_transceiver_suspend(const struct usb_otg_transceiver *self)
+{
+	static const struct usb_otg_transceiver_write_request
+	default_requests [] = {
+		{
+			USB_OTG_CONTROL_1_SET,
+			USB_OTG_CONTROL_1_SUSPEND_REG
+		}, {
+			USB_OTG_CONTROL_1_CLEAR,
+			USB_OTG_CONTROL_1_TRANSP_EN | USB_OTG_CONTROL_1_UART_EN
+		}, {
+			USB_OTG_CONTROL_2_CLEAR,
+			USB_OTG_CONTROL_2_DP_PULLUP
+				| USB_OTG_CONTROL_2_DM_PULLUP
+				| USB_OTG_CONTROL_2_ID_PULLDOWN
+				| USB_OTG_CONTROL_2_VBUS_DRV
+				| USB_OTG_CONTROL_2_VBUS_CHRG
+		}, {
+			USB_OTG_CONTROL_3_SET,
+			USB_OTG_CONTROL_3_PSW_OE
+		}, {
+			USB_OTG_CONTROL_3_CLEAR,
+			USB_OTG_CONTROL_3_AUDIO_EN
+		}
+	};
+
+	int eno;
+	const struct usb_otg_transceiver_write_request *requests;
+	size_t count;
+
+	requests = default_requests;
+	count = COUNT(default_requests);
+
+	eno = usb_otg_transceiver_write(self, requests, count);
+
+	return eno;
+}
+
+int usb_otg_transceiver_set_vbus(
+	const struct usb_otg_transceiver *self,
+	enum usb_otg_transceiver_vbus vbus
+)
+{
+	int eno;
+	int all = USB_OTG_VBUS_POWER_WITH_CHARGE_PUMP
+		| USB_OTG_VBUS_DISCHARGE_VIA_RESISTOR
+		| USB_OTG_VBUS_CHARGE_VIA_RESISTOR;
+	struct usb_otg_transceiver_write_request requests [] = {
+		{ USB_OTG_CONTROL_2_CLEAR, (uint8_t) (all & ~vbus) },
+		{ USB_OTG_CONTROL_2_SET, (uint8_t) (all & vbus) }
+	};
+
+	eno = usb_otg_transceiver_write(self, &requests [0], COUNT(requests));
+
+	return eno;
+}
diff --git a/rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver_dump.c b/rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver_dump.c
new file mode 100644
index 0000000..f125c60
--- /dev/null
+++ b/rtemsbsd/sys/dev/usb/controller/usb_otg_transceiver_dump.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright (c) 2012 embedded brains GmbH.  All rights reserved.
+ *
+ *  embedded brains GmbH
+ *  Dornierstr. 4
+ *  82178 Puchheim
+ *  Germany
+ *  <info at embedded-brains.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <machine/rtems-bsd-kernel-space.h>
+
+#include <rtems/bsd/sys/param.h>
+#include <sys/systm.h>
+#include <dev/usb/usb_otg_transceiver.h>
+
+int usb_otg_transceiver_dump(const struct usb_otg_transceiver *self)
+{
+	static const uint8_t reg_addrs [] = {
+		USB_OTG_CONTROL_1,
+		USB_OTG_CONTROL_2,
+		USB_OTG_CONTROL_3,
+		USB_OTG_INT_SOURCE,
+		USB_OTG_INT_LATCH,
+		USB_OTG_INT_ENABLE_LOW,
+		USB_OTG_INT_ENABLE_HIGH,
+		ISP130X_OTG_STATUS,
+		ISP130X_VERSION_ID_LOW,
+		ISP130X_VERSION_ID_HIGH
+	};
+
+	int eno;
+	uint8_t values [sizeof(reg_addrs) / sizeof(reg_addrs [0])];
+	size_t reg_count = 7;
+	const char *product = "unknown";
+
+	switch (self->product_id) {
+		case USB_OTG_PRODUCT_ID_ISP1301:
+			product = "ISP1301";
+			reg_count = 10;
+			break;
+		case USB_OTG_PRODUCT_ID_ISP1302:
+			product = "ISP1302";
+			reg_count = 10;
+			break;
+		case USB_OTG_PRODUCT_ID_STOTG04E:
+			product = "STOTG04E";
+			break;
+		case USB_OTG_PRODUCT_ID_MIC2555:
+			product = "MIC2555";
+			break;
+		default:
+			break;
+	}
+
+	printf("USB OTG transceiver <%s>", product);
+
+	eno = usb_otg_transceiver_read(self, reg_addrs, values, reg_count);
+	if (eno == 0) {
+		switch (self->product_id) {
+			case USB_OTG_PRODUCT_ID_ISP1301:
+			case USB_OTG_PRODUCT_ID_ISP1302:
+				printf(
+					": mctl1 %02x, mctl2 %02x, otgctl %02x"
+						", isrc %02x, iltch %02x"
+						", ienl %02x, ienh %02x"
+						", otgsts %02x"
+						", verl %02x, verh %02x\n",
+					values [0],
+					values [2],
+					values [1],
+					values [3],
+					values [4],
+					values [5],
+					values [6],
+					values [7],
+					values [8],
+					values [9]
+				);
+				break;
+			default:
+				printf(
+					": ctl1 %02x, ctl2 %02x, ctl3 %02x"
+						", isrc %02x, iltch %02x"
+						", ienl %02x, ienh %02x\n",
+					values [0],
+					values [1],
+					values [2],
+					values [3],
+					values [4],
+					values [5],
+					values [6]
+				);
+				break;
+		}
+	} else {
+		printf("\n");
+	}
+
+	return eno;
+}
diff --git a/rtemsbsd/sys/dev/usb/usb_otg_transceiver.h b/rtemsbsd/sys/dev/usb/usb_otg_transceiver.h
new file mode 100644
index 0000000..1e6b738
--- /dev/null
+++ b/rtemsbsd/sys/dev/usb/usb_otg_transceiver.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2012 embedded brains GmbH.  All rights reserved.
+ *
+ *  embedded brains GmbH
+ *  Dornierstr. 4
+ *  82178 Puchheim
+ *  Germany
+ *  <info at embedded-brains.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _USB_OTG_TRANSCEIVER_HH_
+#define	_USB_OTG_TRANSCEIVER_HH_
+
+#include <sys/stdint.h>
+
+/* USB OTG transceiver standard registers */
+#define USB_OTG_VENDOR_ID_LOW 0x0
+#define USB_OTG_VENDOR_ID_HIGH 0x1
+#define USB_OTG_PRODUCT_ID_LOW 0x2
+#define USB_OTG_PRODUCT_ID_HIGH 0x3
+#define USB_OTG_CONTROL_1 0x4
+#define USB_OTG_CONTROL_1_SET 0x4
+#define USB_OTG_CONTROL_1_CLEAR 0x5
+#define USB_OTG_CONTROL_2 0x6
+#define USB_OTG_CONTROL_2_SET 0x6
+#define USB_OTG_CONTROL_2_CLEAR 0x7
+#define USB_OTG_CONTROL_3 0x12
+#define USB_OTG_CONTROL_3_SET 0x12
+#define USB_OTG_CONTROL_3_CLEAR 0x13
+#define USB_OTG_INT_SOURCE 0x8
+#define USB_OTG_INT_LATCH 0xa
+#define USB_OTG_INT_LATCH_SET 0xa
+#define USB_OTG_INT_LATCH_CLEAR 0xb
+#define USB_OTG_INT_ENABLE_LOW 0xc
+#define USB_OTG_INT_ENABLE_LOW_SET 0xc
+#define USB_OTG_INT_ENABLE_LOW_CLEAR 0xd
+#define USB_OTG_INT_ENABLE_HIGH 0xe
+#define USB_OTG_INT_ENABLE_HIGH_SET 0xe
+#define USB_OTG_INT_ENABLE_HIGH_CLEAR 0xf
+
+/* ISP130X specific registers */
+#define ISP130X_OTG_STATUS 0x10
+#define ISP130X_VERSION_ID_LOW 0x14
+#define ISP130X_VERSION_ID_HIGH 0x15
+
+/* ISP1302 specific registers */
+#define ISP1302_MISC_CONTROL_SET 0x18
+#define ISP1302_MISC_CONTROL_CLEAR 0x19
+
+/* Product identifiers */
+#define USB_OTG_PRODUCT_ID_ISP1301 0x1301
+#define USB_OTG_PRODUCT_ID_ISP1302 0x1302
+#define USB_OTG_PRODUCT_ID_STOTG04E 0xa0c4
+#define USB_OTG_PRODUCT_ID_MIC2555 0x55b0
+
+struct usb_otg_transceiver {
+	int (*read)(
+		const struct usb_otg_transceiver *self,
+		uint8_t reg_addr,
+		uint8_t *value
+	);
+	int (*write)(
+		const struct usb_otg_transceiver *self,
+		uint8_t reg_addr,
+		uint8_t value
+	);
+	uint16_t vendor_id;
+	uint16_t product_id;
+	uint8_t i2c_addr;
+};
+
+int usb_otg_transceiver_read(
+	const struct usb_otg_transceiver *self,
+	const uint8_t *reg_addrs,
+	uint8_t *values,
+	size_t count
+);
+
+struct usb_otg_transceiver_write_request {
+	uint8_t reg_addr;
+	uint8_t value;
+};
+
+int usb_otg_transceiver_write(
+	const struct usb_otg_transceiver *self,
+	const struct usb_otg_transceiver_write_request *requests,
+	size_t count
+);
+
+int usb_otg_transceiver_init(struct usb_otg_transceiver *self);
+
+int usb_otg_transceiver_dump(const struct usb_otg_transceiver *self);
+
+int usb_otg_transceiver_resume(const struct usb_otg_transceiver *self);
+
+int usb_otg_transceiver_suspend(const struct usb_otg_transceiver *self);
+
+enum usb_otg_transceiver_vbus {
+	USB_OTG_VBUS_NOTHING,
+	USB_OTG_VBUS_POWER_WITH_CHARGE_PUMP = 1 << 5,
+	USB_OTG_VBUS_DISCHARGE_VIA_RESISTOR = 1 << 6,
+	USB_OTG_VBUS_CHARGE_VIA_RESISTOR = 1 << 7
+};
+
+int usb_otg_transceiver_set_vbus(
+	const struct usb_otg_transceiver *self,
+	enum usb_otg_transceiver_vbus vbus
+);
+
+#endif/* _USB_OTG_TRANSCEIVER_HH_ */




More information about the vc mailing list