[rtems-docs commit] Remove references to SPARC/ SIS BSP. Also clean up old ERC32 references.

[Joel Sherrill]

Module:    rtems-docs
Branch:    master
Commit:    d8beaabd02581bb42359400fe71659428aa76e8c
Changeset: http://git.rtems.org/rtems-docs/commit/?id=d8beaabd02581bb42359400fe71659428aa76e8c

Author:    Joel Sherrill <joel at rtems.org>
Date:      Tue Nov 15 17:54:47 2016 -0600

Remove references to SPARC/SIS BSP. Also clean up old ERC32 references.

updates #2810.

---

 cpu-supplement/sparc.rst       | 27 +++++----------------------
 rsb/third-party-packages.rst   |  2 +-
 user/installation/releases.rst |  2 +-
 3 files changed, 7 insertions(+), 24 deletions(-)

diff --git a/cpu-supplement/sparc.rst b/cpu-supplement/sparc.rst
index bb94435..e0f5240 100644
--- a/cpu-supplement/sparc.rst
+++ b/cpu-supplement/sparc.rst
@@ -35,7 +35,7 @@ available from SPARC International, Inc.  (http://www.sparc.com):
 
 **ERC32 Specific Information**
 
-The European Space Agency's ERC32 is a three chip computing core implementing a
+The European Space Agency's ERC32 is a microprocessor implementing a
 SPARC V7 processor and associated support circuitry for embedded space
 applications. The integer and floating-point units (90C601E & 90C602E) are
 based on the Cypress 7C601 and 7C602, with additional error-detection and
@@ -46,28 +46,11 @@ error-detection.  The core is designed to work at 25MHz, but using space
 qualified memories limits the system frequency to around 15 MHz, resulting in a
 performance of 10 MIPS and 2 MFLOPS.
 
-Information on the ERC32 and a number of development support tools, such as the
-SPARC Instruction Simulator (SIS), are freely available on the Internet.  The
-following documents and SIS are available via anonymous ftp or pointing your
-web browser at ftp://ftp.estec.esa.nl/pub/ws/wsd/erc32.
+The ERC32 is available from Atmel as the TSC695F.
 
-- ERC32 System Design Document
-
-- MEC Device Specification
-
-Additionally, the SPARC RISC User's Guide from Matra MHS documents the
-functionality of the integer and floating point units including the instruction
-set information.  To obtain this document as well as ERC32 components and VHDL
-models contact:
-
-    Matra MHS SA
-    3 Avenue du Centre, BP 309,
-    78054 St-Quentin-en-Yvelines,
-    Cedex, France
-    VOICE: +31-1-30607087
-    FAX: +31-1-30640693
-
-Amar Guennon (amar.guennon at matramhs.fr) is familiar with the ERC32.
+The RTEMS configuration of GDB enables the SPARC Instruction Simulator (SIS) 
+which can simulate the ERC32 as well as the follow up LEON2 and LEON3
+microprocessors.
 
 CPU Model Dependent Features
 ============================
diff --git a/rsb/third-party-packages.rst b/rsb/third-party-packages.rst
index a43abeb..21d9887 100644
--- a/rsb/third-party-packages.rst
+++ b/rsb/third-party-packages.rst
@@ -46,7 +46,7 @@ To build Net-SNMP the command is:
     $ ../source-builder/sb-set-builder --log=log_sis_net_snmp \
         --prefix=$HOME/development/rtems/bsps/4.11 \
         --with-tools=$HOME/development/rtems/4.11 \
-        --host=sparc-rtems4.11 --with-rtems-bsp=sis 4.11/net-mgmt/net-snmp
+        --host=sparc-rtems4.11 --with-rtems-bsp=erc32 4.11/net-mgmt/net-snmp
     RTEMS Source Builder - Set Builder, v0.3.0
     Build Set: 4.11/net-mgmt/net-snmp
     config: net-mgmt/net-snmp-5.7.2.1-1.cfg
diff --git a/user/installation/releases.rst b/user/installation/releases.rst
index 92fce78..afce803 100644
--- a/user/installation/releases.rst
+++ b/user/installation/releases.rst
@@ -54,7 +54,7 @@ shosted here. It has excellent internet access and performance.
    By default all the BSPs for an architecture are built. If you only wish to
    have a specific BSP built you can specify the BSP list by providing to the
    RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the
-   SPARC architecture you can supply ``--with-rtemsbsp="erc32 sis"``. This can
+   SPARC architecture you can supply ``--with-rtemsbsp="erc32 leon3"``. This can
    speed the build time up for some architectures that have a lot of BSPs.
 
 Once you have built the tools and kernel you can move to the Packages section