[rtems-libbsd commit] ehci_imx: Import from FreeBSD
Christian Mauderer
christianm at rtems.org
Wed Apr 15 15:13:21 UTC 2020
Module: rtems-libbsd
Branch: 5-freebsd-12
Commit: 29eda67d54fb40dda0b1d88896b782432aab45ad
Changeset: http://git.rtems.org/rtems-libbsd/commit/?id=29eda67d54fb40dda0b1d88896b782432aab45ad
Author: Sebastian Huber <sebastian.huber at embedded-brains.de>
Date: Wed Nov 14 10:40:27 2018 +0100
ehci_imx: Import from FreeBSD
Update #3869.
---
freebsd/sys/arm/freescale/imx/imx6_usbphy.c | 212 ++++++++++++
freebsd/sys/dev/usb/controller/ehci_imx.c | 516 ++++++++++++++++++++++++++++
2 files changed, 728 insertions(+)
diff --git a/freebsd/sys/arm/freescale/imx/imx6_usbphy.c b/freebsd/sys/arm/freescale/imx/imx6_usbphy.c
new file mode 100644
index 0000000..8f47507
--- /dev/null
+++ b/freebsd/sys/arm/freescale/imx/imx6_usbphy.c
@@ -0,0 +1,212 @@
+#include <machine/rtems-bsd-kernel-space.h>
+
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2013 Ian Lepore <ian at freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*
+ * USBPHY driver for Freescale i.MX6 family of SoCs.
+ */
+
+#include <rtems/bsd/local/opt_bus.h>
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+#include <sys/rman.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <machine/bus.h>
+
+#include <arm/freescale/imx/imx_ccmvar.h>
+#include <arm/freescale/imx/imx6_anatopreg.h>
+#include <arm/freescale/imx/imx6_anatopvar.h>
+
+/*
+ * Hardware register defines.
+ */
+#define PWD_REG 0x0000
+#define CTRL_STATUS_REG 0x0030
+#define CTRL_SET_REG 0x0034
+#define CTRL_CLR_REG 0x0038
+#define CTRL_TOGGLE_REG 0x003c
+#define CTRL_SFTRST (1U << 31)
+#define CTRL_CLKGATE (1 << 30)
+#define CTRL_ENUTMILEVEL3 (1 << 15)
+#define CTRL_ENUTMILEVEL2 (1 << 14)
+
+struct usbphy_softc {
+ device_t dev;
+ struct resource *mem_res;
+ u_int phy_num;
+};
+
+static struct ofw_compat_data compat_data[] = {
+ {"fsl,imx6q-usbphy", true},
+ {"fsl,imx6ul-usbphy", true},
+ {NULL, false}
+};
+
+static int
+usbphy_detach(device_t dev)
+{
+ struct usbphy_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ if (sc->mem_res != NULL)
+ bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->mem_res);
+
+ return (0);
+}
+
+static int
+usbphy_attach(device_t dev)
+{
+ struct usbphy_softc *sc;
+ int err, regoff, rid;
+
+ sc = device_get_softc(dev);
+ err = 0;
+
+ /* Allocate bus_space resources. */
+ rid = 0;
+ sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+ RF_ACTIVE);
+ if (sc->mem_res == NULL) {
+ device_printf(dev, "Cannot allocate memory resources\n");
+ err = ENXIO;
+ goto out;
+ }
+
+ /*
+ * XXX Totally lame way to get the unit number (but not quite as lame as
+ * adding an ad-hoc property to the fdt data). This works as long as
+ * this driver is used for imx6 only.
+ */
+ const uint32_t PWD_PHY1_REG_PHYSADDR = 0x020c9000;
+ if (BUS_SPACE_PHYSADDR(sc->mem_res, 0) == PWD_PHY1_REG_PHYSADDR) {
+ sc->phy_num = 0;
+ regoff = 0;
+ } else {
+ sc->phy_num = 1;
+ regoff = 0x60;
+ }
+
+ /*
+ * Based on a note in the u-boot source code, disable charger detection
+ * to avoid degrading the differential signaling on the DP line. Note
+ * that this disables (by design) both charger detection and contact
+ * detection, because of the screwball mix of active-high and active-low
+ * bits in this register.
+ */
+ imx6_anatop_write_4(IMX6_ANALOG_USB1_CHRG_DETECT + regoff,
+ IMX6_ANALOG_USB_CHRG_DETECT_N_ENABLE |
+ IMX6_ANALOG_USB_CHRG_DETECT_N_CHK_CHRG);
+
+ imx6_anatop_write_4(IMX6_ANALOG_USB1_CHRG_DETECT + regoff,
+ IMX6_ANALOG_USB_CHRG_DETECT_N_ENABLE |
+ IMX6_ANALOG_USB_CHRG_DETECT_N_CHK_CHRG);
+
+ /* XXX Configure the overcurrent detection here. */
+
+ /*
+ * Turn on the phy clocks.
+ */
+ imx_ccm_usbphy_enable(dev);
+
+ /*
+ * Set the software reset bit, then clear both it and the clock gate bit
+ * to bring the device out of reset with the clock running.
+ */
+ bus_write_4(sc->mem_res, CTRL_SET_REG, CTRL_SFTRST);
+ bus_write_4(sc->mem_res, CTRL_CLR_REG, CTRL_SFTRST | CTRL_CLKGATE);
+
+ /* Set UTMI+ level 2+3 bits to enable low and full speed devices. */
+ bus_write_4(sc->mem_res, CTRL_SET_REG,
+ CTRL_ENUTMILEVEL2 | CTRL_ENUTMILEVEL3);
+
+ /* Power up: clear all bits in the powerdown register. */
+ bus_write_4(sc->mem_res, PWD_REG, 0);
+
+ err = 0;
+
+out:
+
+ if (err != 0)
+ usbphy_detach(dev);
+
+ return (err);
+}
+
+static int
+usbphy_probe(device_t dev)
+{
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data)
+ return (ENXIO);
+
+ device_set_desc(dev, "Freescale i.MX6 USB PHY");
+
+ return (BUS_PROBE_DEFAULT);
+}
+
+static device_method_t usbphy_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, usbphy_probe),
+ DEVMETHOD(device_attach, usbphy_attach),
+ DEVMETHOD(device_detach, usbphy_detach),
+
+ DEVMETHOD_END
+};
+
+static driver_t usbphy_driver = {
+ "usbphy",
+ usbphy_methods,
+ sizeof(struct usbphy_softc)
+};
+
+static devclass_t usbphy_devclass;
+
+/*
+ * This driver needs to start before the ehci driver, but later than the usual
+ * "special" drivers like clocks and cpu. Ehci starts at DEFAULT so SUPPORTDEV
+ * is where this driver fits most.
+ */
+EARLY_DRIVER_MODULE(usbphy, simplebus, usbphy_driver, usbphy_devclass, 0, 0,
+ BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_MIDDLE);
+
diff --git a/freebsd/sys/dev/usb/controller/ehci_imx.c b/freebsd/sys/dev/usb/controller/ehci_imx.c
new file mode 100644
index 0000000..a872fb6
--- /dev/null
+++ b/freebsd/sys/dev/usb/controller/ehci_imx.c
@@ -0,0 +1,516 @@
+#include <machine/rtems-bsd-kernel-space.h>
+
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2010-2012 Semihalf
+ * Copyright (c) 2012 The FreeBSD Foundation
+ * Copyright (c) 2013 Ian Lepore <ian at freebsd.org>
+ * All rights reserved.
+ *
+ * Portions of this software were developed by Oleksandr Rybalko
+ * under sponsorship from the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*
+ * EHCI driver for Freescale i.MX SoCs which incorporate the USBOH3 controller.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+#include <sys/condvar.h>
+#include <sys/rman.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+#include <dev/usb/usb_busdma.h>
+#include <dev/usb/usb_process.h>
+#include <dev/usb/usb_controller.h>
+#include <dev/usb/usb_bus.h>
+#include <dev/usb/controller/ehci.h>
+#include <dev/usb/controller/ehcireg.h>
+#include <rtems/bsd/local/usbdevs.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+
+#include <arm/freescale/imx/imx_ccmvar.h>
+
+#include <rtems/bsd/local/opt_platform.h>
+
+/*
+ * Notes on the hardware and related FDT data seen in the wild.
+ *
+ * There are two sets of registers in the USBOH3 implementation; documentation
+ * refers to them as "core" and "non-core" registers. A set of core register
+ * exists for each OTG or EHCI device. There is a single set of non-core
+ * registers per USBOH3, and they control aspects of operation not directly
+ * related to the USB specs, such as whether interrupts from each of the core
+ * devices are able to generate a SoC wakeup event.
+ *
+ * In the FreeBSD universe we might be inclined to describe the core and
+ * non-core registers by using a pair of resource address/size values (two
+ * entries in the reg property for each core). However, we have to work with
+ * existing FDT data (which mostly comes from the linux universe), and the way
+ * they've chosen to represent this is with an entry for a "usbmisc" device
+ * whose reg property describes the non-core registers. The way we handle FDT
+ * data, this means that the resources (memory-mapped register range) for the
+ * non-core registers belongs to a device other than the echi devices.
+ *
+ * Because the main ehci device cannot access registers in a range that's
+ * defined in the fdt data as belonging to another device, we implement a teeny
+ * little "usbmisc" driver which exists only to provide access to the usbmisc
+ * control register for each of the 4 usb controller instances. That little
+ * driver is implemented here in this file, before the main driver.
+ *
+ * In addition to the single usbmisc device, the existing FDT data defines a
+ * separate device for each of the OTG or EHCI cores within the USBOH3. Each of
+ * those devices has a set of core registers described by the reg property.
+ *
+ * The core registers for each of the four cores in the USBOH3 are divided into
+ * two parts: a set of imx-specific registers at an offset of 0 from the
+ * beginning of the register range, and the standard USB (EHCI or OTG) registers
+ * at an offset of 0x100 from the beginning of the register range. The FreeBSD
+ * way of dealing with this might be to map out two ranges in the reg property,
+ * but that's not what the alternate universe has done. To work with existing
+ * FDT data, we acquire the resource that maps all the core registers, then use
+ * bus_space_subregion() to create another resource that maps just the standard
+ * USB registers, which we provide to the standard USB code in the ehci_softc.
+ *
+ * The following compat strings have been seen for the OTG and EHCI cores. The
+ * FDT compat table in this driver contains all these strings, but as of this
+ * writing, not all of these SoCs have been tested with the driver. The fact
+ * that imx27 is common to all of them gives some hope that the driver will work
+ * on all these SoCs.
+ * - "fsl,imx23-usb", "fsl,imx27-usb";
+ * - "fsl,imx25-usb", "fsl,imx27-usb";
+ * - "fsl,imx28-usb", "fsl,imx27-usb";
+ * - "fsl,imx51-usb", "fsl,imx27-usb";
+ * - "fsl,imx53-usb", "fsl,imx27-usb";
+ * - "fsl,imx6q-usb", "fsl,imx27-usb";
+ *
+ * The FDT data for some SoCs contains the following properties, which we don't
+ * currently do anything with:
+ * - fsl,usbmisc = <&usbmisc 0>;
+ * - fsl,usbphy = <&usbphy0>;
+ *
+ * Some imx SoCs have FDT data related to USB PHY, some don't. We have separate
+ * usbphy drivers where needed; this data is mentioned here just to keep all the
+ * imx-FDT-usb-related info in one place. Here are the usbphy compat strings
+ * known to exist:
+ * - "nop-usbphy"
+ * - "usb-nop-xceiv";
+ * - "fsl,imx23-usbphy"
+ * - "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+ * - "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+ *
+ */
+
+/*-----------------------------------------------------------------------------
+ * imx_usbmisc driver
+ *---------------------------------------------------------------------------*/
+
+#define USBNC_OVER_CUR_POL (1u << 8)
+#define USBNC_OVER_CUR_DIS (1u << 7)
+
+struct imx_usbmisc_softc {
+ device_t dev;
+ struct resource *mmio;
+};
+
+static struct ofw_compat_data usbmisc_compat_data[] = {
+ {"fsl,imx6q-usbmisc", true},
+ {"fsl,imx51-usbmisc", true},
+ {"fsl,imx25-usbmisc", true},
+ {NULL, false},
+};
+
+static void
+imx_usbmisc_set_ctrl(device_t dev, u_int index, uint32_t bits)
+{
+ struct imx_usbmisc_softc *sc;
+ uint32_t reg;
+
+ sc = device_get_softc(dev);
+ reg = bus_read_4(sc->mmio, index * sizeof(uint32_t));
+ bus_write_4(sc->mmio, index * sizeof(uint32_t), reg | bits);
+}
+
+#ifdef notyet
+static void
+imx_usbmisc_clr_ctrl(device_t dev, u_int index, uint32_t bits)
+{
+ struct imx_usbmisc_softc *sc;
+ uint32_t reg;
+
+ sc = device_get_softc(dev);
+ reg = bus_read_4(sc->mmio, index * sizeof(uint32_t));
+ bus_write_4(sc->mmio, index * sizeof(uint32_t), reg & ~bits);
+}
+#endif
+
+static int
+imx_usbmisc_probe(device_t dev)
+{
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (ofw_bus_search_compatible(dev, usbmisc_compat_data)->ocd_data) {
+ device_set_desc(dev, "i.MX USB Misc Control");
+ return (BUS_PROBE_DEFAULT);
+ }
+ return (ENXIO);
+}
+
+static int
+imx_usbmisc_detach(device_t dev)
+{
+ struct imx_usbmisc_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ if (sc->mmio != NULL)
+ bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->mmio);
+
+ return (0);
+}
+
+static int
+imx_usbmisc_attach(device_t dev)
+{
+ struct imx_usbmisc_softc *sc;
+ int err, rid;
+
+ sc = device_get_softc(dev);
+ err = 0;
+
+ /* Allocate bus_space resources. */
+ rid = 0;
+ sc->mmio = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+ RF_ACTIVE);
+ if (sc->mmio == NULL) {
+ device_printf(dev, "Cannot allocate memory resources\n");
+ return (ENXIO);
+ }
+
+ OF_device_register_xref(OF_xref_from_node(ofw_bus_get_node(dev)), dev);
+
+ return (0);
+}
+
+static device_method_t imx_usbmisc_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, imx_usbmisc_probe),
+ DEVMETHOD(device_attach, imx_usbmisc_attach),
+ DEVMETHOD(device_detach, imx_usbmisc_detach),
+
+ DEVMETHOD_END
+};
+
+static driver_t imx_usbmisc_driver = {
+ "imx_usbmisc",
+ imx_usbmisc_methods,
+ sizeof(struct imx_usbmisc_softc)
+};
+
+static devclass_t imx_usbmisc_devclass;
+
+/*
+ * This driver needs to start before the ehci driver, but later than the usual
+ * "special" drivers like clocks and cpu. Ehci starts at DEFAULT so
+ * DEFAULT-1000 seems good.
+ */
+EARLY_DRIVER_MODULE(imx_usbmisc, simplebus, imx_usbmisc_driver,
+ imx_usbmisc_devclass, 0, 0, BUS_PASS_DEFAULT - 1000);
+
+/*-----------------------------------------------------------------------------
+ * imx_ehci driver...
+ *---------------------------------------------------------------------------*/
+
+/*
+ * Each EHCI device in the SoC has some SoC-specific per-device registers at an
+ * offset of 0, then the standard EHCI registers begin at an offset of 0x100.
+ */
+#define IMX_EHCI_REG_OFF 0x100
+#define IMX_EHCI_REG_SIZE 0x100
+
+struct imx_ehci_softc {
+ ehci_softc_t ehci_softc;
+ device_t dev;
+ struct resource *ehci_mem_res; /* EHCI core regs. */
+ struct resource *ehci_irq_res; /* EHCI core IRQ. */
+};
+
+static struct ofw_compat_data compat_data[] = {
+ {"fsl,imx6q-usb", 1},
+ {"fsl,imx53-usb", 1},
+ {"fsl,imx51-usb", 1},
+ {"fsl,imx28-usb", 1},
+ {"fsl,imx27-usb", 1},
+ {"fsl,imx25-usb", 1},
+ {"fsl,imx23-usb", 1},
+ {NULL, 0},
+};
+
+static void
+imx_ehci_post_reset(struct ehci_softc *ehci_softc)
+{
+ uint32_t usbmode;
+
+ /* Force HOST mode */
+ usbmode = EOREAD4(ehci_softc, EHCI_USBMODE_NOLPM);
+ usbmode &= ~EHCI_UM_CM;
+ usbmode |= EHCI_UM_CM_HOST;
+ EOWRITE4(ehci_softc, EHCI_USBMODE_NOLPM, usbmode);
+}
+
+static int
+imx_ehci_probe(device_t dev)
+{
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
+ device_set_desc(dev, "Freescale i.MX integrated USB controller");
+ return (BUS_PROBE_DEFAULT);
+ }
+ return (ENXIO);
+}
+
+static int
+imx_ehci_detach(device_t dev)
+{
+ struct imx_ehci_softc *sc;
+ ehci_softc_t *esc;
+ int err;
+
+ sc = device_get_softc(dev);
+
+ esc = &sc->ehci_softc;
+
+ /* First detach all children; we can't detach if that fails. */
+ if ((err = device_delete_children(dev)) != 0)
+ return (err);
+
+ if (esc->sc_flags & EHCI_SCFLG_DONEINIT)
+ ehci_detach(esc);
+ if (esc->sc_intr_hdl != NULL)
+ bus_teardown_intr(dev, esc->sc_irq_res,
+ esc->sc_intr_hdl);
+ if (sc->ehci_irq_res != NULL)
+ bus_release_resource(dev, SYS_RES_IRQ, 0,
+ sc->ehci_irq_res);
+ if (sc->ehci_mem_res != NULL)
+ bus_release_resource(dev, SYS_RES_MEMORY, 0,
+ sc->ehci_mem_res);
+
+ usb_bus_mem_free_all(&esc->sc_bus, &ehci_iterate_hw_softc);
+
+ return (0);
+}
+
+static void
+imx_ehci_disable_oc(struct imx_ehci_softc *sc)
+{
+ device_t usbmdev;
+ pcell_t usbmprops[2];
+ phandle_t node;
+ ssize_t size;
+ int index;
+
+ /* Get the reference to the usbmisc driver from the fdt data */
+ node = ofw_bus_get_node(sc->dev);
+ size = OF_getencprop(node, "fsl,usbmisc", usbmprops,
+ sizeof(usbmprops));
+ if (size < sizeof(usbmprops)) {
+ device_printf(sc->dev, "failed to retrieve fsl,usbmisc "
+ "property, cannot disable overcurrent protection");
+ return;
+ }
+ /* Retrieve the device_t via the xref handle. */
+ usbmdev = OF_device_from_xref(usbmprops[0]);
+ if (usbmdev == NULL) {
+ device_printf(sc->dev, "usbmisc device not found, "
+ "cannot disable overcurrent protection");
+ return;
+ }
+ /* Call the device routine to set the overcurrent disable bit. */
+ index = usbmprops[1];
+ imx_usbmisc_set_ctrl(usbmdev, index, USBNC_OVER_CUR_DIS);
+}
+
+static int
+imx_ehci_attach(device_t dev)
+{
+ struct imx_ehci_softc *sc;
+ ehci_softc_t *esc;
+ int err, rid;
+
+ sc = device_get_softc(dev);
+ sc->dev = dev;
+ esc = &sc->ehci_softc;
+ err = 0;
+
+ /* Allocate bus_space resources. */
+ rid = 0;
+ sc->ehci_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+ RF_ACTIVE);
+ if (sc->ehci_mem_res == NULL) {
+ device_printf(dev, "Cannot allocate memory resources\n");
+ err = ENXIO;
+ goto out;
+ }
+
+ rid = 0;
+ sc->ehci_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
+ RF_ACTIVE);
+ if (sc->ehci_irq_res == NULL) {
+ device_printf(dev, "Cannot allocate IRQ resources\n");
+ err = ENXIO;
+ goto out;
+ }
+
+ esc->sc_io_tag = rman_get_bustag(sc->ehci_mem_res);
+ esc->sc_bus.parent = dev;
+ esc->sc_bus.devices = esc->sc_devices;
+ esc->sc_bus.devices_max = EHCI_MAX_DEVICES;
+ esc->sc_bus.dma_bits = 32;
+
+ /* allocate all DMA memory */
+ if (usb_bus_mem_alloc_all(&esc->sc_bus, USB_GET_DMA_TAG(dev),
+ &ehci_iterate_hw_softc) != 0) {
+ device_printf(dev, "usb_bus_mem_alloc_all() failed\n");
+ err = ENOMEM;
+ goto out;
+ }
+
+ /*
+ * Set handle to USB related registers subregion used by
+ * generic EHCI driver.
+ */
+ err = bus_space_subregion(esc->sc_io_tag,
+ rman_get_bushandle(sc->ehci_mem_res),
+ IMX_EHCI_REG_OFF, IMX_EHCI_REG_SIZE, &esc->sc_io_hdl);
+ if (err != 0) {
+ device_printf(dev, "bus_space_subregion() failed\n");
+ err = ENXIO;
+ goto out;
+ }
+
+ /* Setup interrupt handler. */
+ err = bus_setup_intr(dev, sc->ehci_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
+ NULL, (driver_intr_t *)ehci_interrupt, esc, &esc->sc_intr_hdl);
+ if (err != 0) {
+ device_printf(dev, "Could not setup IRQ\n");
+ goto out;
+ }
+
+ /* Turn on clocks. */
+ imx_ccm_usb_enable(dev);
+
+ /* Disable overcurrent detection, if configured to do so. */
+ if (OF_hasprop(ofw_bus_get_node(sc->dev), "disable-over-current"))
+ imx_ehci_disable_oc(sc);
+
+ /* Add USB bus device. */
+ esc->sc_bus.bdev = device_add_child(dev, "usbus", -1);
+ if (esc->sc_bus.bdev == NULL) {
+ device_printf(dev, "Could not add USB device\n");
+ goto out;
+ }
+ device_set_ivars(esc->sc_bus.bdev, &esc->sc_bus);
+
+ esc->sc_id_vendor = USB_VENDOR_FREESCALE;
+ strlcpy(esc->sc_vendor, "Freescale", sizeof(esc->sc_vendor));
+
+ /*
+ * Set flags that affect ehci_init() behavior, and hook our post-reset
+ * code into the standard controller code.
+ */
+ esc->sc_flags |= EHCI_SCFLG_NORESTERM | EHCI_SCFLG_TT;
+ esc->sc_vendor_post_reset = imx_ehci_post_reset;
+ esc->sc_vendor_get_port_speed = ehci_get_port_speed_portsc;
+
+ err = ehci_init(esc);
+ if (err != 0) {
+ device_printf(dev, "USB init failed, usb_err_t=%d\n",
+ err);
+ goto out;
+ }
+ esc->sc_flags |= EHCI_SCFLG_DONEINIT;
+
+ /* Probe the bus. */
+ err = device_probe_and_attach(esc->sc_bus.bdev);
+ if (err != 0) {
+ device_printf(dev,
+ "device_probe_and_attach() failed\n");
+ goto out;
+ }
+
+ err = 0;
+
+out:
+
+ if (err != 0)
+ imx_ehci_detach(dev);
+
+ return (err);
+}
+
+static device_method_t ehci_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, imx_ehci_probe),
+ DEVMETHOD(device_attach, imx_ehci_attach),
+ DEVMETHOD(device_detach, imx_ehci_detach),
+ DEVMETHOD(device_suspend, bus_generic_suspend),
+ DEVMETHOD(device_resume, bus_generic_resume),
+ DEVMETHOD(device_shutdown, bus_generic_shutdown),
+
+ /* Bus interface */
+ DEVMETHOD(bus_print_child, bus_generic_print_child),
+
+ DEVMETHOD_END
+};
+
+static driver_t ehci_driver = {
+ "ehci",
+ ehci_methods,
+ sizeof(struct imx_ehci_softc)
+};
+
+static devclass_t ehci_devclass;
+
+DRIVER_MODULE(ehci, simplebus, ehci_driver, ehci_devclass, 0, 0);
+MODULE_DEPEND(ehci, usb, 1, 1, 1);
More information about the vc
mailing list