[rtems-docs commit] user: Add xilinx-zynq BSP details

Chris Johns chrisj at rtems.org
Wed Sep 9 02:00:56 UTC 2020


Module:    rtems-docs
Branch:    master
Commit:    75f51d67e064ee1fcce3bf85a3595aa871d5b610
Changeset: http://git.rtems.org/rtems-docs/commit/?id=75f51d67e064ee1fcce3bf85a3595aa871d5b610

Author:    Chris Johns <chrisj at rtems.org>
Date:      Tue Sep  8 13:29:42 2020 +1000

user: Add xilinx-zynq BSP details

---

 user/bsps/arm/xilinx-zynq.rst | 114 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 112 insertions(+), 2 deletions(-)

diff --git a/user/bsps/arm/xilinx-zynq.rst b/user/bsps/arm/xilinx-zynq.rst
index 909b23e..365c336 100644
--- a/user/bsps/arm/xilinx-zynq.rst
+++ b/user/bsps/arm/xilinx-zynq.rst
@@ -1,8 +1,118 @@
 .. SPDX-License-Identifier: CC-BY-SA-4.0
 
-.. Copyright (C) 2019 TBD
+.. Copyright (C) 2020 Chris Johns (chrisj at rtems.org)
 
 xilinx-zynq
 ===========
 
-TODO.
+This BSP supports the Xilinx Zynq range of devices. This family of
+devices contain the same ARM hard IP and the different parts have
+different sizes of programable logic.
+
+The BSP defaults may need to be adjusted using ``configure`` BSP
+options to match the size of memory your board may have.
+
+Bootloader
+----------
+
+The bootloader initialises the Zynq device. The Xilinx tool provide an
+interface to configure the hardware. This is includes the buses,
+clocks, memory and UART board rate. The output of this is called
+``ps7_init`` and it a C file. The Xilinx SDK builds a first stage boot
+loader (FSBL) using this file.
+
+The U-Boot boot loader has it's own FSBL called ``MLO`` to initialise
+the hardware.
+
+Clocks
+------
+
+An application can provide a function called:
+
+.. code-block:: none
+
+    uint32_t a9mpcore_clock_periphclk(void);
+
+to return the peripheral clock. Normally this is half the CPU
+clock. This function is declared ``weak`` so you can override the
+default behaviour by providing it in your application.
+
+Debugging with xilinx_zynq_a9_qemu
+----------------------------------
+
+To debug an application add the QEMU options ``-s``. If you need to
+debug an initialisation issue also add ``-S``. For example to debug a
+networking application you could use:
+
+.. code-block:: none
+
+    qemu-system-arm -M xilinx-zynq-a9 -m 256M -no-reboot -serial \
+        null -serial mon:stdio -nographic \
+	-net nic,model=cadence_gem -net vde,id=vde0,sock=/tmp/vde1 \
+	-kernel myapp.exe \
+	-s -S
+
+Start GDB with the same executable QEMU is running and connect to the
+QEMU GDB server:
+
+.. code-block:: none
+
+    (gdb) target remote :1234
+
+If your application is crashing set a breakpoint on the fatal error
+handler:
+
+.. code-block:: none
+
+    (gdb) b bsp_fatal_extension
+
+Enter continue to run the application. Running QEMU loads the
+executable and initialises the CPU. If the ``-S`` option is provided
+the CPU is held in reset. Without the option the CPU runs starting
+RTEMS. Either way you are connecting to set up target and all you need
+to do is continue:
+
+.. code-block:: none
+
+    (gdb) c
+
+If you have a crash and the breakpoint on ``bsp_fatal_extension`` is
+hit, load the following a GDB script:
+
+.. code-block:: none
+
+    define arm-crash
+     set $code = $arg0
+     set $r0 = ((const rtems_exception_frame *) $code)->register_r0
+     set $r1 = ((const rtems_exception_frame *) $code)->register_r1
+     set $r2 = ((const rtems_exception_frame *) $code)->register_r2
+     set $r3 = ((const rtems_exception_frame *) $code)->register_r3
+     set $r4 = ((const rtems_exception_frame *) $code)->register_r4
+     set $r5 = ((const rtems_exception_frame *) $code)->register_r5
+     set $r6 = ((const rtems_exception_frame *) $code)->register_r6
+     set $r7 = ((const rtems_exception_frame *) $code)->register_r7
+     set $r8 = ((const rtems_exception_frame *) $code)->register_r8
+     set $r9 = ((const rtems_exception_frame *) $code)->register_r9
+     set $r10 = ((const rtems_exception_frame *) $code)->register_r10
+     set $r11 = ((const rtems_exception_frame *) $code)->register_r11
+     set $r12 = ((const rtems_exception_frame *) $code)->register_r12
+     set $sp = ((const rtems_exception_frame *) $code)->register_sp
+     set $lr = ((const rtems_exception_frame *) $code)->register_lr
+     set $pc = ((const rtems_exception_frame *) $code)->register_pc
+     set $cpsr = ((const rtems_exception_frame *) $code)->register_cpsr
+   end
+
+Enter the command:
+
+.. code-block:: none
+
+    (gdb) arm-crash code
+
+
+Enter ``bt`` to see the stack back trace.
+
+The script moves the context back to the crash location. You should be
+able to view variables and inspect the stack.
+
+The fatal error handler runs inside an exception context that is not
+the one than generated the exception.



More information about the vc mailing list