[rtems commit] powerpc/shared: ISA bus bridge fails to enable the openpic irq
Chris Johns
chrisj at rtems.org
Sun Feb 7 23:26:12 UTC 2021
Module: rtems
Branch: master
Commit: 450e238bc6dde7caa221fad1a8339b3cf0dbd0c2
Changeset: http://git.rtems.org/rtems/commit/?id=450e238bc6dde7caa221fad1a8339b3cf0dbd0c2
Author: Chris Johns <chrisj at rtems.org>
Date: Sat Feb 6 10:03:21 2021 -1000
powerpc/shared: ISA bus bridge fails to enable the openpic irq
- The call to enable the openpic irq for the ISA bridge fails
because the IRQ used is offset by the ISA bus signals and
the openpic call expects an IRQ relative to its signals.
- Add the MVME 2600/2700 to the list of boards with an ISA bridge.
Closes #4231
---
bsps/powerpc/shared/irq/irq_init.c | 2 +-
bsps/powerpc/shared/irq/openpic_i8259_irq.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/bsps/powerpc/shared/irq/irq_init.c b/bsps/powerpc/shared/irq/irq_init.c
index 1a44992..1042c9d 100644
--- a/bsps/powerpc/shared/irq/irq_init.c
+++ b/bsps/powerpc/shared/irq/irq_init.c
@@ -310,7 +310,7 @@ void BSP_rtems_irq_mng_init(unsigned cpuId)
#endif
known_cpi_isa_bridge = 1;
}
- if ( currentBoard == MVME_2300 ) {
+ if ( currentBoard == MVME_2300 || currentBoard == MVME_2600_2700_W_MVME761 ) {
/* nothing to do for W83C553 bridge */
known_cpi_isa_bridge = 1;
}
diff --git a/bsps/powerpc/shared/irq/openpic_i8259_irq.c b/bsps/powerpc/shared/irq/openpic_i8259_irq.c
index 4a9c393..513b9ac 100644
--- a/bsps/powerpc/shared/irq/openpic_i8259_irq.c
+++ b/bsps/powerpc/shared/irq/openpic_i8259_irq.c
@@ -214,7 +214,7 @@ int BSP_setup_the_pic(rtems_irq_global_settings* config)
/*
* Must enable PCI/ISA bridge IRQ
*/
- openpic_enable_irq (BSP_PCI_ISA_BRIDGE_IRQ);
+ openpic_enable_irq (BSP_PCI_ISA_BRIDGE_IRQ - BSP_PCI_IRQ_LOWEST_OFFSET);
#endif
#endif
More information about the vc
mailing list