[rtems-test] 2017-10-21 13:25:32: xilinx_zynq_zedboard
Chris Johns
chrisj at rtems.org
Sat Oct 21 04:01:21 UTC 2017
Testing time : 1:35:49.147653
Average test time: 0:00:10.175482
Summary
=======
Passed: 550
Failed: 2
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Invalid: 3
------------------
Total: 565
Failures:
sp51.exe.img
fsjffs2gc01.exe.img
User Input:
fileio.exe.img
top.exe.img
monitor.exe.img
termios.exe.img
Benchmark:
linpack.exe.img
dhrystone.exe.img
whetstone.exe.img
Timeouts:
dl02.exe.img
spintrcritical07.exe.img
spintrcritical15.exe.img
Invalid:
spinternalerror01.exe.img
sptimecounter01.exe.img
spsysinit01.exe.img
Log
===
RTEMS Testing - Tester, 4.12 (5e40b4a1638c modified)
Command Line: /opt/work/chris/rtems/tools/rtems-tools.git/tester/rtems-test --rtems-tools=/opt/work/rtems/4.12 --rtems-bsp=xilinx_zynq_zedboard --timeout=60 --log=t.txt --mail --filter=*.exe.img .
Python: 2.7.13 (default, Jul 13 2017, 01:17:52) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
[ 1/565] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 | arm/xilinx_zynq_zedboard: dhrystone.exe.img
<skipped passes>
[ 16/565] p:12 f:0 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsjffs2gc01.exe.img
Result: failed Time: 0:00:03.083075 fsjffs2gc01.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe.img
] DHCP client bound to address 10.10.5.121 (263 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *######
] 4.3 MiB/s
] done
] Bytes transferred = 76623 (12b4f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 76559 Bytes = 74.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: FSJFFS2GC 1
] *** BEGIN OF TEST FSJFFS2GC 1 ***
]
]
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/fstests/fsjffs2gc01/init.c: 284 memcmp(&info, &info_after_first_gc, sizeof(*&info)) == 0
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 17/565] p:12 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: fsnofs01.exe.img
<skipped passes>
[ 91/565] p:86 f:1 u:0 e:0 I:0 B:3 t:0 i:0 | arm/xilinx_zynq_zedboard: dl02.exe.img
Result: timeout Time: 0:01:05.059451 dl02.exe.img
] .... done
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/libtests/dl02/dl02.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (269 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#######
] 3.9 MiB/s
] done
] Bytes transferred = 97804 (17e0c hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 97740 Bytes = 95.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
]
] load: /dl-o1.o
] handle: 0x217c48 has unresolved externals
] load: /dl-o2.o
] handle: 0x218540 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o1.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl02/dl-o2.c]
] 0: 1
] 1: 2
] 2: 3
] 3: 4
] *** TIMEOUT TIMEOUT
[ 92/565] p:86 f:1 u:0 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: dl03.exe.img
<skipped passes>
[358/565] p:348 f:1 u:4 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: sp51.exe.img
Result: failed Time: 0:00:03.561117 sp51.exe.img
] .. done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sp51/sp51.exe.img
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.9 MiB/s
] done
] Bytes transferred = 44737 (aec1 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 44673 Bytes = 43.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
]
]
]
]
]
]
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/sp51/init.c: 43 sc == RTEMS_SUCCESSFUL
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[359/565] p:348 f:2 u:4 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: sp52.exe.img
<skipped passes>
[444/565] p:433 f:2 u:4 e:0 I:0 B:3 t:1 i:0 | arm/xilinx_zynq_zedboard: spinternalerror01.exe.img
Result: invalid Time: 0:00:07.215622 spinternalerror01.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (270 ms)
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01/spinternalerror01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 3.2 MiB/s
] done
] Bytes transferred = 20255 (4f1f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 20191 Bytes = 19.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4Ñ
] ¥*‚8 €”˜PA €" 1*¥Ñ
] ¥*”˜PA €" 1*¥Ñ
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.121 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[445/565] p:433 f:2 u:4 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: spinternalerror02.exe.img
<skipped passes>
[453/565] p:441 f:2 u:4 e:0 I:0 B:3 t:1 i:1 | arm/xilinx_zynq_zedboard: spintrcritical07.exe.img
Result: timeout Time: 0:01:05.330535 spintrcritical07.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical07/spintrcritical07.exe.img
] DHCP client bound to address 10.10.5.202 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.8 MiB/s
] done
] Bytes transferred = 47294 (b8be hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47230 Bytes = 46.1 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SPINTRCRITICAL 7
] *** BEGIN OF TEST SPINTRCRITICAL 7 ***
]
]
]
]
] *** TIMEOUT TIMEOUT
[454/565] p:441 f:2 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: spintrcritical08.exe.img
<skipped passes>
[461/565] p:448 f:2 u:4 e:0 I:0 B:3 t:2 i:1 | arm/xilinx_zynq_zedboard: spintrcritical15.exe.img
Result: timeout Time: 0:01:05.484085 spintrcritical15.exe.img
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spintrcritical15/spintrcritical15.exe.img
] DHCP client bound to address 10.10.5.121 (270 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 3.5 MiB/s
] done
] Bytes transferred = 47495 (b987 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 47431 Bytes = 46.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
]
=> test start: SPINTRCRITICAL 15
] *** BEGIN OF TEST SPINTRCRITICAL 15 ***
]
] Init - Trying to generate timeout of a thread while another is blocking
] Init - on the same thread queue
] Init - There is no way for the test to know if it hits the case
]
]
] *** TIMEOUT TIMEOUT
[462/565] p:448 f:2 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: spintrcritical16.exe.img
<skipped passes>
[504/565] p:490 f:2 u:4 e:0 I:0 B:3 t:3 i:1 | arm/xilinx_zynq_zedboard: spsysinit01.exe.img
Result: invalid Time: 0:00:07.195953 spsysinit01.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01/spsysinit01.exe.img
] DHCP client bound to address 10.10.5.121 (269 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *###
] 3.8 MiB/s
] done
] Bytes transferred = 43561 (aa29 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 43497 Bytes = 42.5 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4Ñ
] ¥*‚8 €”˜&f$1*¥ù
=> test end: None
] *** END OF TEST SPSYSINIT 1 ***
]
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: re-requesting exe; target must have reset
] DHCP client bound to address 10.10.5.121 (265 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.121
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[505/565] p:490 f:2 u:4 e:0 I:0 B:3 t:3 i:2 | arm/xilinx_zynq_zedboard: spsyslock01.exe.img
<skipped passes>
[513/565] p:498 f:2 u:4 e:0 I:0 B:3 t:3 i:2 | arm/xilinx_zynq_zedboard: sptimecounter01.exe.img
Result: invalid Time: 0:00:07.152218 sptimecounter01.exe.img
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: ./arm-rtems4.12/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01/sptimecounter01.exe.img
] DHCP client bound to address 10.10.5.202 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 3.6 MiB/s
] done
] Bytes transferred = 22855 (5947 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 22791 Bytes = 22.3 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4Ñ
] ¥*‚8 €”˜(¢ðPA@ *¥¡(¥*”˜(¢ðPA@ *¥Ñ
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.202 (262 ms)
=> tftp: re-requesting exe; target must have reset
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.202
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[514/565] p:498 f:2 u:4 e:0 I:0 B:3 t:3 i:3 | arm/xilinx_zynq_zedboard: sptimecounter02.exe.img
<skipped passes>
[565/565] p:549 f:2 u:4 e:0 I:0 B:3 t:3 i:3 | arm/xilinx_zynq_zedboard: tmtimer01.exe.img
Passed: 550
Failed: 2
User Input: 4
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 3
Invalid: 3
------------------
Total: 565
Failures:
sp51.exe.img
fsjffs2gc01.exe.img
User Input:
fileio.exe.img
top.exe.img
monitor.exe.img
termios.exe.img
Benchmark:
linpack.exe.img
dhrystone.exe.img
whetstone.exe.img
Timeouts:
dl02.exe.img
spintrcritical07.exe.img
spintrcritical15.exe.img
Invalid:
spinternalerror01.exe.img
sptimecounter01.exe.img
spsysinit01.exe.img
Average test time: 0:00:10.175482
Testing time : 1:35:49.147653
More information about the build
mailing list