[rtems-test] 2017-10-21 15:16:46: beagleboneblack

Sat Oct 21 05:36:20 UTC 2017

Testing time     : 1:19:33.422770
Average test time: 0:00:08.448535

Summary
=======

Passed:        546
Failed:         10
User Input:      4
Expected Fail:   0
Indeterminate:   0
Benchmark:       3
Timeout:         2
Invalid:         0
------------------
Total:         565

Failures:
 spintrcritical10.exe.img
 tmtimer01.exe.img
 spcache01.exe.img
 debugger01.exe.img
 sp37.exe.img
 spintrcritical05.exe.img
 spintrcritical22.exe.img
 sp51.exe.img
 tmcontext01.exe.img
 fsjffs2gc01.exe.img
User Input:
 top.exe.img
 termios.exe.img
 monitor.exe.img
 fileio.exe.img
Benchmark:
 dhrystone.exe.img
 whetstone.exe.img
 linpack.exe.img
Timeouts:
 spintrcritical15.exe.img
 spintrcritical07.exe.img

Log
===

RTEMS Testing - Tester, 4.12 (5e40b4a1638c modified)
 Command Line: /opt/work/chris/rtems/tools/rtems-tools.git/tester/rtems-test --rtems-tools=/opt/work/rtems/4.12 --rtems-bsp=beagleboneblack --timeout=60 --log=t.txt --mail --filter=*.exe.img ./arm-rtems4.12/c/beagleboneblack/testsuites
 Python: 2.7.13 (default, Jul 13 2017, 01:17:52) [GCC 4.2.1 Compatible FreeBSD Clang 3.8.0 (tags/RELEASE_380/final 262564)]
[  1/565] p:0   f:0   u:0   e:0   I:0   B:0   t:0   i:0   | arm/beagleboneblack: dhrystone.exe.img
 <skipped passes>

[ 16/565] p:12  f:0   u:0   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: fsjffs2gc01.exe.img
Result: failed     Time: 0:00:04.691410 fsjffs2gc01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/fstests/fsjffs2gc01/fsjffs2gc01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (14 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *######
] 	 2.3 MiB/s
] done
] Bytes transferred = 83567 (1466f hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:12 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    83503 Bytes = 81.5 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: FSJFFS2GC 1
] *** BEGIN OF TEST FSJFFS2GC 1 ***
] Initializing filesystem JFFS2
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/fstests/fsjffs2gc01/init.c: 284 memcmp(&info, &info_after_first_gc, sizeof(*&info)) == 0ú
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[ 17/565] p:12  f:1   u:0   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: fsnofs01.exe.img
 <skipped passes>

[ 82/565] p:77  f:1   u:0   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: debugger01.exe.img
Result: failed     Time: 0:00:05.197181 debugger01.exe.img
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/libtests/debugger01/debugger01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *######
] 	 2.8 MiB/s
] done
] Bytes transferred = 85405 (14d9d hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:21 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    85341 Bytes = 83.3 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: DEBUGGER01
] *** BEGIN OF TEST DEBUGGER01 ***
] error: rtems-db: remote not found: test
] [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v4.2) ARMv7 [v7, baseline CP14 registers] breakpoints:5 watchpoints:1
] 
] R0   = 0x0000005C R8  = 0x00000000
] R1   = 0x00000000 R9  = 0x00000000
] R2   = 0x00000003 R10 = 0x00000000
] R3   = 0x03078002 R11 = 0x801037B0
] R4   = 0x801029B0 R12 = 0x801029B4
] R5   = 0x00000002 SP  = 0x8010CBC0
] R6   = 0x801148B8 LR  = 0x800153E4
] R7   = 0x00000000 PC  = 0x80015428
] CPSR = 0x20000113 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[ 83/565] p:77  f:2   u:0   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: defaultconfig01.exe.img
 <skipped passes>

[345/565] p:335 f:2   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: sp37.exe.img
Result: failed     Time: 0:00:04.515569 sp37.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp37/sp37.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 4 MiB/s
] done
] Bytes transferred = 54984 (d6c8 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:28 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    54920 Bytes = 53.6 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SP 37
] *** BEGIN OF TEST SP 37 ***
] clock_tick from task level
] Blocking task... suspending self
] clock_tick from task level with preempt -- OK
] interrupt is in progress (use body)
] interrupt disable (use inline)
] interrupt flash (use inline)
] interrupt enable (use inline)
] interrupt level mode (use inline)
] test case working..
] interrupt disable (use body)þ
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[346/565] p:335 f:3   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: sp38.exe.img
 <skipped passes>

[358/565] p:347 f:3   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: sp51.exe.img
Result: failed     Time: 0:00:04.594432 sp51.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/sp51/sp51.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (13 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 3.9 MiB/s
] done
] Bytes transferred = 49378 (c0e2 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:24 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    49314 Bytes = 48.2 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
] Create semaphore - priority ceiling unlocked - invalid ceiling
] Create semaphore - priority ceiling locked - violate ceiling
] Create semaphore - priority ceiling unlocked
] Obtain semaphore -- violate ceiling
] Release semaphore we did not obtain
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/sp51/init.c: 41 sc == RTEMS_SUCCESSFULþ
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[359/565] p:347 f:4   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: sp52.exe.img
 <skipped passes>

[386/565] p:374 f:4   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: spcache01.exe.img
Result: failed     Time: 0:00:04.572732 spcache01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spcache01/spcache01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (6 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2 MiB/s
] done
] Bytes transferred = 51136 (c7c0 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:27 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    51072 Bytes = 49.9 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SPCACHE 1
] *** BEGIN OF TEST SPCACHE 1 ***
] data cache flush and invalidate test
] data cache operations by line passed the test (copy-back cache detected)
] data cache line size 32 bytes
] data cache size 0 bytes
] load 4096 bytes with flush entire data
]   duration with normal cache 1 ns
]   duration with warm cache 1 ns
]   duration with flushed cache 1 ns
] load 4096 bytes with flush multiple data
]   duration with normal cache 1 ns
]   duration with warm cache 1 ns
]   duration with flushed cache 1 ns
] load 4096 bytes with invalidate multiple data
]   duration with normal cache 1 ns
]   duration with warm cache 1 ns
]   duration with invalidated cache 1 ns
] store 4096 bytes with flush entire data
]   duration with normal cache 1 ns
]   duration with warm cache 1 ns
]   duration with flushed cache 1 ns
] store 4096 bytes with flush multiple data
]   duration with normal cache 1 ns
]   duration with warm cache 1 ns
]   duration with flushed cache 1 ns
] store 4096 bytes with invalidate multiple data
]   duration with normal cache 1 ns
]   duration with warm cache 1 ns
]   duration with invalidated cache 1 ns
] instruction cache line size 32 bytes
] instruction cache size 0 bytes
] 
] R0   = 0x00000001 R8  = 0x00000001
] R1   = 0x00000000 R9  = 0x00000000
] R2   = 0x00000000 R10 = 0x60000113
] R3   = 0x20C5187D R11 = 0x00000000
] R4   = 0x00000001 R12 = 0x00000001
] R5   = 0x00000000 SP  = 0x80107698
] R6   = 0x00000001 LR  = 0x80001900
] R7   = 0x00000000 PC  = 0x800023D0
] CPSR = 0x00000193 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[387/565] p:374 f:5   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: spcbssched01.exe.img
 <skipped passes>

[451/565] p:438 f:5   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: spintrcritical05.exe.img
Result: failed     Time: 0:00:40.798590 spintrcritical05.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical05/spintrcritical05.exe.img
] DHCP client bound to address 10.10.5.203 (18 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2.7 MiB/s
] done
] Bytes transferred = 50837 (c695 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:24 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    50773 Bytes = 49.6 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SPINTRCRITICAL 5
] *** BEGIN OF TEST SPINTRCRITICAL 5 ***
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/Without Timeout (Reverse)
] Init - Case not hit - ran too longú
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[452/565] p:438 f:6   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: spintrcritical06.exe.img
[453/565] p:439 f:6   u:4   e:0   I:0   B:3   t:0   i:0   | arm/beagleboneblack: spintrcritical07.exe.img
Result: timeout    Time: 0:01:05.730088 spintrcritical07.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical07/spintrcritical07.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (18 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2.3 MiB/s
] done
] Bytes transferred = 51060 (c774 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:28 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    50996 Bytes = 49.8 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SPINTRCRITICAL 7
] *** BEGIN OF TEST SPINTRCRITICAL 7 ***
] Init - Trying to generate semaphore release from ISR while blocking
] Init - There is no way for the test to know if it hits the case
] Init - Variation is: Priority/Restart Search Task (Backward)
] *** TIMEOUT TIMEOUT
[454/565] p:439 f:6   u:4   e:0   I:0   B:3   t:1   i:0   | arm/beagleboneblack: spintrcritical08.exe.img
 <skipped passes>

[456/565] p:441 f:6   u:4   e:0   I:0   B:3   t:1   i:0   | arm/beagleboneblack: spintrcritical10.exe.img
Result: failed     Time: 0:00:38.494067 spintrcritical10.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical10/spintrcritical10.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2 MiB/s
] done
] Bytes transferred = 51321 (c879 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:27 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    51257 Bytes = 50.1 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SPINTRCRITICAL 10
] *** BEGIN OF TEST SPINTRCRITICAL 10 ***
] Init - Trying to generate any satisfied before timeout while blocking on event
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical10/init.c: 144 ctx->hitþ
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[457/565] p:441 f:7   u:4   e:0   I:0   B:3   t:1   i:0   | arm/beagleboneblack: spintrcritical11.exe.img
 <skipped passes>

[461/565] p:445 f:7   u:4   e:0   I:0   B:3   t:1   i:0   | arm/beagleboneblack: spintrcritical15.exe.img
Result: timeout    Time: 0:01:05.800274 spintrcritical15.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical15/spintrcritical15.exe.img
] DHCP client bound to address 10.10.5.203 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2.7 MiB/s
] done
] Bytes transferred = 51170 (c7e2 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:26 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    51106 Bytes = 49.9 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SPINTRCRITICAL 15
] *** BEGIN OF TEST SPINTRCRITICAL 15 ***
] Init - Trying to generate timeout of a thread while another is blocking
] Init -   on the same thread queue
] Init - There is no way for the test to know if it hits the case
] Init - rtems_semaphore_create - OK
] Init - rtems_task_create - OK
] *** TIMEOUT TIMEOUT
[462/565] p:445 f:7   u:4   e:0   I:0   B:3   t:2   i:0   | arm/beagleboneblack: spintrcritical16.exe.img
 <skipped passes>

[466/565] p:449 f:7   u:4   e:0   I:0   B:3   t:2   i:0   | arm/beagleboneblack: spintrcritical22.exe.img
Result: failed     Time: 0:00:59.000109 spintrcritical22.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/sptests/spintrcritical22/spintrcritical22.exe.img
] DHCP client bound to address 10.10.5.203 (18 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2.4 MiB/s
] done
] Bytes transferred = 50366 (c4be hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:28 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    50302 Bytes = 49.1 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: SPINTRCRITICAL 22
] *** BEGIN OF TEST SPINTRCRITICAL 22 ***
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical22/init.c: 118 ctx->doneþ
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[467/565] p:449 f:8   u:4   e:0   I:0   B:3   t:2   i:0   | arm/beagleboneblack: spintrcritical23.exe.img
 <skipped passes>

[562/565] p:544 f:8   u:4   e:0   I:0   B:3   t:2   i:0   | arm/beagleboneblack: tmcontext01.exe.img
Result: failed     Time: 0:00:04.116138 tmcontext01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmcontext01/tmcontext01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (18 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2.3 MiB/s
] done
] Bytes transferred = 49952 (c320 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:17 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    49888 Bytes = 48.7 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: TMCONTEXT 1
] *** BEGIN OF TEST TMCONTEXT 1 ***
] <Test>
]   <ContextSwitchTest environment="normal">
]     <Sample functionNestLevel="0">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="1">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="2">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="3">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="4">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="5">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="6">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="7">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="8">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="9">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="10">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="11">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="12">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="13">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="14">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]     <Sample functionNestLevel="15">
]       <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
]     </Sample>
]   </ContextSwitchTest>
]   <ContextSwitchTest environment="dirty">
] 
] R0   = 0x00000008 R8  = 0x80103600
] R1   = 0x00000008 R9  = 0x801026BC
] R2   = 0x00000000 R10 = 0x80103600
] R3   = 0x20C5187D R11 = 0x801157FC
] R4   = 0x00000000 R12 = 0x00000008
] R5   = 0x00000000 SP  = 0x801157D8
] R6   = 0x00000000 LR  = 0x8000059C
] R7   = 0x00000000 PC  = 0x80000C4C
] CPSR = 0x00000193 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
[563/565] p:544 f:9   u:4   e:0   I:0   B:3   t:2   i:0   | arm/beagleboneblack: tmfine01.exe.img
 <skipped passes>

[565/565] p:546 f:9   u:4   e:0   I:0   B:3   t:2   i:0   | arm/beagleboneblack: tmtimer01.exe.img
Result: failed     Time: 0:00:06.457761 tmtimer01.exe.img
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: ./arm-rtems4.12/c/beagleboneblack/testsuites/tmtests/tmtimer01/tmtimer01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.203 (12 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.203
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 	 2 MiB/s
] done
] Bytes transferred = 50220 (c42c hex)
] ## Booting kernel from Legacy Image at 82000000 ...
]    Image Name:   RTEMS
]    Created:      2017-10-11  11:29:17 UTC
]    Image Type:   ARM RTEMS Kernel Image (gzip compressed)
]    Data Size:    50156 Bytes = 49 KiB
]    Load Address: 80000000
]    Entry Point:  80000000
]    Verifying Checksum ... OK
]    Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
] 
] RTEMS Beagleboard: am335x-based
] 
] 
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] <TMTimer01 timerCount="65504">
]   <Sample>
]     <ActiveTimers>0</ActiveTimers>
] R0   = 0x00000000 R8  = 0x00000020
] R1   = 0x00000008 R9  = 0x00000000
] R2   = 0x00000000 R10 = 0x00000000
] R3   = 0x20C5187D R11 = 0x00000000
] R4   = 0x80014E38 R12 = 0x00000008
] R5   = 0x12010001 SP  = 0x80106E40
] R6   = 0x00000000 LR  = 0x80000550
] R7   = 0x8010277C PC  = 0x80000BD8
] CPSR = 0x00000113 VEC = 0x00000001
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
] 
] 
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
] 
] CPU  : AM335X-GP rev 2.1
] I2C:   ready
] DRAM:  512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
] 
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net:   eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
=> target off: wemo-reset CSEng3 0: 

Passed:        546
Failed:         10
User Input:      4
Expected Fail:   0
Indeterminate:   0
Benchmark:       3
Timeout:         2
Invalid:         0
------------------
Total:         565

Failures:
 spintrcritical10.exe.img
 tmtimer01.exe.img
 spcache01.exe.img
 debugger01.exe.img
 sp37.exe.img
 spintrcritical05.exe.img
 spintrcritical22.exe.img
 sp51.exe.img
 tmcontext01.exe.img
 fsjffs2gc01.exe.img
User Input:
 top.exe.img
 termios.exe.img
 monitor.exe.img
 fileio.exe.img
Benchmark:
 dhrystone.exe.img
 whetstone.exe.img
 linpack.exe.img
Timeouts:
 spintrcritical15.exe.img
 spintrcritical07.exe.img
Average test time: 0:00:08.448535
Testing time     : 1:19:33.422770