[rtems-test] arm/beagleboneblack: RTEMS_POSIX_API: Passed:560 Failed:20 Timeout:0 Invalid:1 Wrong:0
Chris Johns
chrisj at rtems.org
Fri Jul 26 06:16:11 UTC 2019
Testing time : 2:51:59.622233
Average test time: 0:00:17.490885
Host
====
FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
Configuration
=============
Version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
Build : RTEMS_POSIX_API
Tools : 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
Summary
=======
Passed: 560
Failed: 20
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
debugger01.exe
dl01.exe
dl02.exe
dl05.exe
dl06.exe
dl07.exe
dl08.exe
dl09.exe
psx10.exe
psxautoinit02.exe
psxcond01.exe
psxinttypes01.exe
spcache01.exe
spconfig02.exe
spintrcritical20.exe
spintrcritical21.exe
spintrcritical23.exe
spintrcritical24.exe
tmcontext01.exe
tmtimer01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Invalid:
psxdevctl01.exe
Log
===
RTEMS Testing - Tester, 5.0.not_released
Command Line: /opt/work/rtems/5/bin/rtems-test --rtems-bsp=beagleboneblack --user-config=/home/chris/.rtemstesterrc --mail --mail-to=build at rtems.org --log=bbb.log arm-rtems5/c/beagleboneblack/testsuites
Host: FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64
Python: 3.6.6 (default, Oct 2 2018, 01:22:29) [GCC 4.2.1 Compatible FreeBSD Clang 6.0.0 (tags/RELEASE_600/final 326565)]
Host: FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
[ 1/590] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | arm/beagleboneblack: dhrystone.exe
<<skipping passes>>
[ 82/590] p:78 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: debugger01.exe
Result: failed Time: 0:00:15.810081 debugger01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:47:51 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 63486 Bytes = 62.00 KiB = 0.06 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#####
] 4.3 MiB/s
] done
] Bytes transferred = 63550 (f83e hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:47:51 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 63486 Bytes = 62 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: DEBUGGER01
] *** BEGIN OF TEST DEBUGGER01 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] error: rtems-db: remote not found: test
] [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v4.2) ARMv7 [v7, baseline CP14 registers] breakpoints:5 watchpoints:1
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x0000005c R8 = 0x801055c8
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000003 R10 = 0x801055c8
] R3 = 0x03078002 R11 = 0x00000000
] R4 = 0x80113330 R12 = 0x00000000
] R5 = 0x80105e00 SP = 0x8010bf00
] R6 = 0x00000000 LR = 0x80005d0c
] R7 = 0x00000000 PC = 0x80005d88
] CPSR = 0x20000113 VEC = 0x00000001
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010002
] executing thread name: DBSs
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 83/590] p:78 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: defaultconfig01.exe
<<skipping passes>>
[ 90/590] p:85 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl01.exe
Result: failed Time: 0:00:15.670657 dl01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:49:59 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 91418 Bytes = 89.28 KiB = 0.09 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#######
] 2.9 MiB/s
] done
] Bytes transferred = 91482 (1655a hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:49:59 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 91418 Bytes = 89.3 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 1
] *** BEGIN OF TEST libdl (RTL) 1 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] load: /dl01-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80112b18 R8 = 0x00000001
] R1 = 0x801068c8 R9 = 0x80112b18
] R2 = 0x80112c10 R10 = 0x801068c8
] R3 = 0x0000002b R11 = 0x8010694c
] R4 = 0x00000000 R12 = 0x00000000
] R5 = 0x0000000c SP = 0x80106818
] R6 = 0x80112c10 LR = 0x80016f58
] R7 = 0x0000000c PC = 0x80016738
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 91/590] p:85 f:2 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl02.exe
Result: failed Time: 0:00:15.799253 dl02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:50:15 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 97398 Bytes = 95.12 KiB = 0.09 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#######
] 4 MiB/s
] done
] Bytes transferred = 97462 (17cb6 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:50:15 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 97398 Bytes = 95.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] load: /dl02-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x801183b8 R8 = 0x00000001
] R1 = 0x801068c0 R9 = 0x801183b8
] R2 = 0x801184b0 R10 = 0x801068c0
] R3 = 0x0000002b R11 = 0x80106944
] R4 = 0x00000000 R12 = 0x00000000
] R5 = 0x0000000c SP = 0x80106810
] R6 = 0x801184b0 LR = 0x80016fa0
] R7 = 0x0000000c PC = 0x80016780
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 92/590] p:85 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl03.exe
<<skipping passes>>
[ 94/590] p:87 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl05.exe
Result: failed Time: 0:00:15.108755 dl05.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:50:53 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 134829 Bytes = 131.67 KiB = 0.13 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe.img
] T ##########
] 25.4 KiB/s
] done
] Bytes transferred = 134893 (20eed hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:50:53 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 134829 Bytes = 131.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 5
] *** BEGIN OF TEST libdl (RTL) 5 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80124a00 R8 = 0x00000001
] R1 = 0x8010cd20 R9 = 0x80124a00
] R2 = 0x80124c50 R10 = 0x8010cd20
] R3 = 0x0000002b R11 = 0x8010cda4
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x8010cc70
] R6 = 0x80124c50 LR = 0x8001719c
] R7 = 0x00000008 PC = 0x8001697c
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 95/590] p:87 f:4 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl06.exe
Result: failed Time: 0:00:15.925188 dl06.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:51:09 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 93284 Bytes = 91.10 KiB = 0.09 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (6 ms)
] link up on port 0, speed 100, full duplex
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl06.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#######
] 3.1 MiB/s
] done
] Bytes transferred = 93348 (16ca4 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:51:09 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 93284 Bytes = 91.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] load: /dl06.rap
] handle: 0x80111b50 loaded
] Loaded module: argc:4 [/opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/dl06/dl06-o1.c]
] libm: lcong48
] libm: atan2
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x66666666 R8 = 0x00000000
] R1 = 0x401c6666 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x40408000 R11 = 0x00000000
] R4 = 0x66666666 R12 = 0xa0000113
] R5 = 0x401c6666 SP = 0x80106af0
] R6 = 0x00000000 LR = 0x80114f7c
] R7 = 0x40408000 PC = 0x801143e0
] CPSR = 0x60000113 VEC = 0x00000001
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 96/590] p:87 f:5 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl07.exe
Result: failed Time: 0:00:15.804222 dl07.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:51:25 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 110880 Bytes = 108.28 KiB = 0.11 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 4.6 MiB/s
] done
] Bytes transferred = 110944 (1b160 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:51:25 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 110880 Bytes = 108.3 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 7
] *** BEGIN OF TEST libdl (RTL) 7 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl07/dl-load.c
] load: /dl07-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80127f40 R8 = 0x00000001
] R1 = 0x801068b0 R9 = 0x80127f40
] R2 = 0x80128098 R10 = 0x801068b0
] R3 = 0x0000002b R11 = 0x80106934
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x80106800
] R6 = 0x80128098 LR = 0x80017320
] R7 = 0x00000008 PC = 0x80016b00
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 97/590] p:87 f:6 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl08.exe
Result: failed Time: 0:00:15.870405 dl08.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:51:41 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 111551 Bytes = 108.94 KiB = 0.11 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 2.7 MiB/s
] done
] Bytes transferred = 111615 (1b3ff hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:51:41 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 111551 Bytes = 108.9 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 8
] *** BEGIN OF TEST libdl (RTL) 8 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl08/dl-load.c
] load: /dl08-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x8012a818 R8 = 0x00000001
] R1 = 0x801068d0 R9 = 0x8012a818
] R2 = 0x8012a920 R10 = 0x801068d0
] R3 = 0x0000002b R11 = 0x80106954
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x80106820
] R6 = 0x8012a920 LR = 0x80017030
] R7 = 0x00000008 PC = 0x80016810
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 98/590] p:87 f:7 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl09.exe
Result: failed Time: 0:00:16.010042 dl09.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 13:51:57 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 106867 Bytes = 104.36 KiB = 0.10 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 2.8 MiB/s
] done
] Bytes transferred = 106931 (1a1b3 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 3:51:57 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 106867 Bytes = 104.4 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 9
] *** BEGIN OF TEST libdl (RTL) 9 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80125a10 R8 = 0x00000001
] R1 = 0x80106840 R9 = 0x80125a10
] R2 = 0x80125b68 R10 = 0x80106840
] R3 = 0x0000002b R11 = 0x801068c4
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x80106790
] R6 = 0x80125b68 LR = 0x800171b0
] R7 = 0x00000008 PC = 0x80016990
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 99/590] p:87 f:8 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl10.exe
<<skipping passes>>
[162/590] p:146 f:8 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psx10.exe
Result: failed Time: 0:00:07.965184 psx10.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 14:09:12 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 37904 Bytes = 37.02 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.1 MiB/s
] done
] Bytes transferred = 37968 (9450 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 4:09:12 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 37904 Bytes = 37 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: PSX 10
] *** BEGIN OF TEST PSX 10 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init: pthread_condattr_init
] Init: pthread_condattr_init - EINVAL (attribute invalid)
] Init: pthread_condattr_destroy
] Init: pthread_condattr_destroy - EINVAL (attribute invalid)
] Init: pthread_condattr_init
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_SHARED
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_PRIVATE
] Init: pthread_condattr_setpshared - EINVAL (attribute invalid)
] Init: pthread_condattr_setpshared - EINVAL (pshared invalid)
] Init: pthread_condattr_getpshared - 0
] Init: pthread_condattr_getpshared - EINVAL (attribute invalid)
] Init: pthread_cond_init - NULL attr
] Init: pthread_cond_init - EINVAL (attr not initialized)
] Init: pthread_cond_destroy - EINVAL (cond invalid)
] Init: pthread_cond_init - EINVAL (invalid pshared)
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_SHARED
] Init: pthread_cond_init - OK
] Init: pthread_cond_destroy - OK
] Init: pthread_cond_init - attr
]
] Init: sleep to switch to Task_1
] Task_1: ID is 0x0b010002
] Task_1: pthread_cond_wait
] status = 0
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psx10/init.c: 267 status == EBUSY
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08b010001
] executing thread name:
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[163/590] p:146 f:9 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psx11.exe
<<skipping passes>>
[174/590] p:157 f:9 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psxautoinit02.exe
Result: failed Time: 0:00:37.590630 psxautoinit02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 14:12:24 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 37233 Bytes = 36.36 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxautoinit02.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (13 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.7 MiB/s
] done
] Bytes transferred = 37297 (91b1 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 4:12:24 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 37233 Bytes = 36.4 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: PSXAUTOINIT 2
] *** BEGIN OF TEST PSXAUTOINIT 2 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init - pthread_cond_broadcast - auto initialize - OK
] Init - pthread_cond_signal - auto initialize - OK
] Init - pthread_cond_init - auto initialize - OK
] Init - pthread_mutex_lock - OK
] Init - pthread_cond_timedwait - auto initialize - OK
] Init - pthread_mutex_unlock - OK
] Init - pthread_mutex_destroy - OK
] Init - pthread_cond_destroy - OK
]
] cond destroy OK FAILED -- expected (0 - Success) got (16 - Device or resource busy)
]
] FAILED -- errno (0 - Success)
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08b010001
] executing thread name:
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[175/590] p:157 f:10 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psxbarrier01.exe
<<skipping passes>>
[187/590] p:169 f:10 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psxcond01.exe
Result: failed Time: 0:00:15.855765 psxcond01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 14:15:44 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 37695 Bytes = 36.81 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxcond01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.8 MiB/s
] done
] Bytes transferred = 37759 (937f hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 4:15:44 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 37695 Bytes = 36.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: PSXCOND 1
] *** BEGIN OF TEST PSXCOND 1 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psxcond01/init.c: 62 eno == 0
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08b010001
] executing thread name:
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[188/590] p:169 f:11 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psxcond02.exe
<<skipping passes>>
[190/590] p:171 f:11 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psxdevctl01.exe
Result: invalid Time: 0:00:15.736743 psxdevctl01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxdevctl01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxdevctl01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxdevctl01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 14:16:33 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 38276 Bytes = 37.38 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxdevctl01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (6 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.2 MiB/s
] done
] Bytes transferred = 38340 (95c4 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 4:16:33 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 38276 Bytes = 37.4 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-basedHHHII
] %9OF TEST PSXDEVCTL 1 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] posix_devctl() FIONBIO on stdin return dev_info -- EBADF
] posix_devctl() FIONBIO on stdin NULL dev_info -- EBADF
]
=> test end: None
] *** END OF TEST PSXDEVCTL 1 ***
]
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] DHCP client bound to address 10.10.5.201 (16 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[191/590] p:171 f:11 u:4 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: psxeintr_join.exe
<<skipping passes>>
[207/590] p:187 f:11 u:4 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: psxinttypes01.exe
Result: failed Time: 0:00:13.367424 psxinttypes01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 14:21:06 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 40928 Bytes = 39.97 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 4.3 MiB/s
] done
] Bytes transferred = 40992 (a020 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 4:21:06 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 40928 Bytes = 40 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: PSXINTTYPE 01
] *** BEGIN OF TEST PSXINTTYPE 01 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] strtoimax Testcases....
] Valid Inputs - Positive Number
] Final string pointed by endptr
] Valid Inputs - Negative Number
] Final string pointed by endptr
] Valid Input - Positive Number - Number out of Range
] Valid Input - Negative Number - Number out of Range
] Invalid Input - Send NULL Pointer
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x801025f8 R8 = 0x0000000a
] R1 = 0x80052ce9 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x0000000a R11 = 0x00000000
] R4 = 0x80102390 R12 = 0x01010101
] R5 = 0x00000000 SP = 0x801059f8
] R6 = 0x00000000 LR = 0x80000784
] R7 = 0x00000000 PC = 0x800103f8
] CPSR = 0x60000113 VEC = 0x00000004
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[208/590] p:187 f:12 u:4 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: psxitimer.exe
<<skipping passes>>
[404/590] p:381 f:12 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spcache01.exe
Result: failed Time: 0:00:15.921244 spcache01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 15:19:25 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 34035 Bytes = 33.24 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.7 MiB/s
] done
] Bytes transferred = 34099 (8533 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 5:19:25 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 34035 Bytes = 33.2 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPCACHE 1
] *** BEGIN OF TEST SPCACHE 1 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] data cache flush and invalidate test
] data cache operations by line passed the test (copy-back cache detected)
] data cache line size 32 bytes
] data cache size 262144 bytes
] data cache level 1 size 262144 bytes
] load 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] store 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] instruction cache line size 32 bytes
] instruction cache size 16 bytes
] instruction cache level 1 size 16 bytes
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x00000001 R8 = 0x60000113
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x00000000
] R4 = 0x00000001 R12 = 0x0000001f
] R5 = 0x00000000 SP = 0x80106c48
] R6 = 0x00000001 LR = 0x80001864
] R7 = 0x00000000 PC = 0x8000263c
] CPSR = 0x00000193 VEC = 0x00000001
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[405/590] p:381 f:13 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spcbssched01.exe
<<skipping passes>>
[412/590] p:388 f:13 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spconfig02.exe
Result: failed Time: 0:00:15.729515 spconfig02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 15:22:05 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 27468 Bytes = 26.82 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *##
] 2.6 MiB/s
] done
] Bytes transferred = 27532 (6b8c hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 5:22:05 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 27468 Bytes = 26.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPCONFIG 2
] *** BEGIN OF TEST SPCONFIG 2 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spconfig02/init.c: 378 name_of_id == rtems_build_name('I', 'D', 'L', 'E')
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[413/590] p:388 f:14 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spconsole01.exe
<<skipping passes>>
[482/590] p:457 f:14 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spintrcritical20.exe
Result: failed Time: 0:00:40.221496 spintrcritical20.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical20.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical20.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical20.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 15:45:53 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 34437 Bytes = 33.63 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical20.exe.img
] T ###
] 5.9 KiB/s
] done
] Bytes transferred = 34501 (86c5 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 5:45:53 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 34437 Bytes = 33.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 20
] *** BEGIN OF TEST SPINTRCRITICAL 20 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical20/init.c: 149 ctx->thread_queue_was_null
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[483/590] p:457 f:15 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spintrcritical21.exe
Result: failed Time: 0:00:32.278265 spintrcritical21.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical21.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical21.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical21.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 15:46:33 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 33865 Bytes = 33.07 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical21.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.7 MiB/s
] done
] Bytes transferred = 33929 (8489 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 5:46:33 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 33865 Bytes = 33.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 21
] *** BEGIN OF TEST SPINTRCRITICAL 21 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Event sent from ISR hitting synchronization point has NOT occurred
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical21/init.c: 157 case_hit
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[484/590] p:457 f:16 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spintrcritical22.exe
[485/590] p:458 f:16 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spintrcritical23.exe
Result: failed Time: 0:00:42.295251 spintrcritical23.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical23.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical23.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical23.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 15:47:20 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 32956 Bytes = 32.18 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical23.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.6 MiB/s
] done
] Bytes transferred = 33020 (80fc hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 5:47:20 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 32956 Bytes = 32.2 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 23
] *** BEGIN OF TEST SPINTRCRITICAL 23 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical23/init.c: 133 ctx->done
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[486/590] p:458 f:17 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: spintrcritical24.exe
Result: failed Time: 0:00:41.332664 spintrcritical24.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical24.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical24.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical24.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 15:48:03 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 33591 Bytes = 32.80 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical24.exe.img
] T ###
] 5.9 KiB/s
] done
] Bytes transferred = 33655 (8377 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 5:48:03 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 33591 Bytes = 32.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 24
] *** BEGIN OF TEST SPINTRCRITICAL 24 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical24/init.c: 118 ctx->append_count > 0
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
[487/590] p:458 f:18 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: splinkersets01.exe
<<skipping passes>>
[586/590] p:557 f:18 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: tmcontext01.exe
Result: failed Time: 0:00:11.623491 tmcontext01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 16:15:01 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 31700 Bytes = 30.96 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 1.9 MiB/s
] done
] Bytes transferred = 31764 (7c14 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 6:15:01 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 31700 Bytes = 31 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: TMCONTEXT 1
] *** BEGIN OF TEST TMCONTEXT 1 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] <Test>
] <ContextSwitchTest environment="normal">
] <Sample functionNestLevel="0">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="1">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="2">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="3">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="4">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="5">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="6">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="7">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="8">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="9">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="10">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="11">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="12">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="13">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="14">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="15">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] </ContextSwitchTest>
] <ContextSwitchTest environment="dirty">
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x00010000 R8 = 0x00000001
] R1 = 0x00010000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x80114a9c
] R4 = 0x00000000 R12 = 0x00000008
] R5 = 0x00000000 SP = 0x80114a78
] R6 = 0x00000000 LR = 0x8000065c
] R7 = 0x00000020 PC = 0x80000c60
] CPSR = 0x00000193 VEC = 0x00000001
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[587/590] p:557 f:19 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: tmfine01.exe
<<skipping passes>>
[590/590] p:560 f:19 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/beagleboneblack: tmtimer01.exe
Result: failed Time: 0:00:10.326651 tmtimer01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 16:16:00 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 32543 Bytes = 31.78 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe.img
] T ###
] 5.9 KiB/s
] done
] Bytes transferred = 32607 (7f5f hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 6:16:00 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 32543 Bytes = 31.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] *** TEST VERSION: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] <TMTimer01 timerCount="65504">
] <Sample>
] <ActiveTimers>0</ActiveTimers>
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80103424 R8 = 0x00000020
] R1 = 0x0000fff8 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x00000000
] R4 = 0x12010001 R12 = 0x00010000
] R5 = 0x8000d390 SP = 0x801062e8
] R6 = 0x00000000 LR = 0x80000570
] R7 = 0x00000008 PC = 0x80000fac
] CPSR = 0x00000113 VEC = 0x00000001
] RTEMS version: 5.0.0.3751533d551fa9eb4e8811fd6e600d30df2a95bc
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (8 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
=> target off: cs-pw-ctl 1 off 1
Passed: 560
Failed: 20
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
debugger01.exe
dl01.exe
dl02.exe
dl05.exe
dl06.exe
dl07.exe
dl08.exe
dl09.exe
psx10.exe
psxautoinit02.exe
psxcond01.exe
psxinttypes01.exe
spcache01.exe
spconfig02.exe
spintrcritical20.exe
spintrcritical21.exe
spintrcritical23.exe
spintrcritical24.exe
tmcontext01.exe
tmtimer01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Invalid:
psxdevctl01.exe
Average test time: 0:00:17.490885
Testing time : 2:51:59.622233
More information about the build
mailing list