[rtems-test] arm/beagleboneblack: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:564 Failed:17 Timeout:0 Invalid:0 Wrong:0
Chris Johns
chrisj at rtems.org
Fri Jul 26 12:39:04 UTC 2019
Testing time : 2:51:28.551279
Average test time: 0:00:17.438223
Host
====
FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
Configuration
=============
Version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
Summary
=======
Passed: 564
Failed: 17
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
debugger01.exe
dl01.exe
dl02.exe
dl05.exe
dl07.exe
dl08.exe
dl09.exe
heapwalk.exe
psx10.exe
psxinttypes01.exe
spcache01.exe
spconfig02.exe
spintrcritical05.exe
spintrcritical10.exe
spintrcritical16.exe
tmcontext01.exe
tmtimer01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Log
===
RTEMS Testing - Tester, 5.0.not_released
Command Line: /opt/work/rtems/5/bin/rtems-test --user-config=/home/chris/.rtemstesterrc --mail --mail-to=build at rtems.org --rtems-bsp=beagleboneblack --log=../{bsp}.log arm-rtems5/c/beagleboneblack/testsuites
Host: FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64
Python: 3.6.6 (default, Oct 2 2018, 01:22:29) [GCC 4.2.1 Compatible FreeBSD Clang 6.0.0 (tags/RELEASE_600/final 326565)]
Host: FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
[ 1/590] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | arm/beagleboneblack: dhrystone.exe
<<skipping passes>>
[ 82/590] p:78 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: debugger01.exe
Result: failed Time: 0:00:13.993379 debugger01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:09:53 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 71421 Bytes = 69.75 KiB = 0.07 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/debugger01.exe.img
] T #####
] 13.7 KiB/s
] done
] Bytes transferred = 71485 (1173d hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:09:53 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 71421 Bytes = 69.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: DEBUGGER01
] *** BEGIN OF TEST DEBUGGER01 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] error: rtems-db: remote not found: test
] [CPU:0] error: rtems-db: test remote: begin
] [CPU:0] rtems-db: remote-debug is on
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: test remote: isconnected: not-connected
] [CPU:0] error: rtems-db: test remote: connect
] [CPU:0] rtems-db: remote running
] [CPU:0] rtems-db: arm debug: (v4.2) ARMv7 [v7, baseline CP14 registers] breakpoints:5 watchpoints:1
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x0000005c R8 = 0x80105660
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000003 R10 = 0x80105660
] R3 = 0x03078002 R11 = 0x00000000
] R4 = 0x80115898 R12 = 0x00000000
] R5 = 0x80105e80 SP = 0x8010c040
] R6 = 0x00000000 LR = 0x80005dfc
] R7 = 0x00000000 PC = 0x80005e78
] CPSR = 0x20000113 VEC = 0x00000001
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010002
] executing thread name: DBSs
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 83/590] p:78 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: defaultconfig01.exe
<<skipping passes>>
[ 90/590] p:85 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl01.exe
Result: failed Time: 0:00:26.532419 dl01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:11:53 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 98813 Bytes = 96.50 KiB = 0.09 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#######
] 4.3 MiB/s
] done
] Bytes transferred = 98877 (1823d hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:11:53 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 98813 Bytes = 96.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 1
] *** BEGIN OF TEST libdl (RTL) 1 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] load: /dl01-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80113f10 R8 = 0x00000001
] R1 = 0x801069e0 R9 = 0x80113f10
] R2 = 0x80114058 R10 = 0x801069e0
] R3 = 0x0000002b R11 = 0x80106a64
] R4 = 0x00000000 R12 = 0x00000000
] R5 = 0x0000000c SP = 0x80106930
] R6 = 0x80114058 LR = 0x800198d8
] R7 = 0x0000000c PC = 0x800190b8
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 91/590] p:85 f:2 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl02.exe
Result: failed Time: 0:00:15.769030 dl02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:12:20 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 105672 Bytes = 103.20 KiB = 0.10 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl02.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 4.6 MiB/s
] done
] Bytes transferred = 105736 (19d08 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:12:20 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 105672 Bytes = 103.2 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] load: /dl02-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x8011acb8 R8 = 0x00000001
] R1 = 0x801069d8 R9 = 0x8011acb8
] R2 = 0x8011ae00 R10 = 0x801069d8
] R3 = 0x0000002b R11 = 0x80106a5c
] R4 = 0x00000000 R12 = 0x00000000
] R5 = 0x0000000c SP = 0x80106928
] R6 = 0x8011ae00 LR = 0x80019920
] R7 = 0x0000000c PC = 0x80019100
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 92/590] p:85 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl03.exe
<<skipping passes>>
[ 94/590] p:87 f:3 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl05.exe
Result: failed Time: 0:00:14.988197 dl05.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:13:09 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 143006 Bytes = 139.65 KiB = 0.14 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl05.exe.img
] T ##########
] 27.3 KiB/s
] done
] Bytes transferred = 143070 (22ede hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:13:09 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 143006 Bytes = 139.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 5
] *** BEGIN OF TEST libdl (RTL) 5 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80127250 R8 = 0x00000001
] R1 = 0x8010cdf8 R9 = 0x80127250
] R2 = 0x801275a8 R10 = 0x8010cdf8
] R3 = 0x0000002b R11 = 0x8010ce7c
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x8010cd48
] R6 = 0x801275a8 LR = 0x80019c2c
] R7 = 0x00000008 PC = 0x8001940c
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 95/590] p:87 f:4 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl06.exe
[ 96/590] p:88 f:4 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl07.exe
Result: failed Time: 0:00:15.730030 dl07.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:13:41 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 118597 Bytes = 115.82 KiB = 0.11 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl07.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#########
] 4.2 MiB/s
] done
] Bytes transferred = 118661 (1cf85 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:13:41 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 118597 Bytes = 115.8 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 7
] *** BEGIN OF TEST libdl (RTL) 7 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl07/dl-load.c
] load: /dl07-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x8012e4a0 R8 = 0x00000001
] R1 = 0x801069c8 R9 = 0x8012e4a0
] R2 = 0x8012e680 R10 = 0x801069c8
] R3 = 0x0000002b R11 = 0x80106a4c
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x80106918
] R6 = 0x8012e680 LR = 0x80019cc8
] R7 = 0x00000008 PC = 0x800194a8
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 97/590] p:88 f:5 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl08.exe
Result: failed Time: 0:00:15.869795 dl08.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:13:56 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 119508 Bytes = 116.71 KiB = 0.11 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl08.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (7 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *#########
] 4.4 MiB/s
] done
] Bytes transferred = 119572 (1d314 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:13:56 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 119508 Bytes = 116.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 8
] *** BEGIN OF TEST libdl (RTL) 8 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl08/dl-load.c
] load: /dl08-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x801318e0 R8 = 0x00000001
] R1 = 0x801069e8 R9 = 0x801318e0
] R2 = 0x80131ac0 R10 = 0x801069e8
] R3 = 0x0000002b R11 = 0x80106a6c
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x80106938
] R6 = 0x80131ac0 LR = 0x800199c0
] R7 = 0x00000008 PC = 0x800191a0
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 98/590] p:88 f:6 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl09.exe
Result: failed Time: 0:00:15.921257 dl09.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:14:12 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 114227 Bytes = 111.55 KiB = 0.11 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/dl09.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *########
] 3.9 MiB/s
] done
] Bytes transferred = 114291 (1be73 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:14:12 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 114227 Bytes = 111.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: libdl (RTL) 9
] *** BEGIN OF TEST libdl (RTL) 9 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x8012b608 R8 = 0x00000001
] R1 = 0x80106960 R9 = 0x8012b608
] R2 = 0x8012b7e8 R10 = 0x80106960
] R3 = 0x0000002b R11 = 0x801069e4
] R4 = 0x00000000 R12 = 0x00000010
] R5 = 0x00000008 SP = 0x801068b0
] R6 = 0x8012b7e8 LR = 0x80019b70
] R7 = 0x00000008 PC = 0x80019350
] CPSR = 0x80000113 VEC = 0x00000004
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[ 99/590] p:88 f:7 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: dl10.exe
<<skipping passes>>
[106/590] p:94 f:7 u:1 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: heapwalk.exe
Result: failed Time: 0:00:15.829796 heapwalk.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/libtests/heapwalk.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/libtests/heapwalk.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/libtests/heapwalk.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:16:22 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 41530 Bytes = 40.56 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/libtests/heapwalk.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (6 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.8 MiB/s
] done
] Bytes transferred = 41594 (a27a hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:16:22 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 41530 Bytes = 40.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: HEAPWALK
] *** BEGIN OF TEST HEAPWALK ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] start with a system state != SYSTEM_STATE_UP
] testing the _Heap_Walk_check_control() function
] test what happens if page size = 0
] set page size to a not CPU-aligned value
] set minimal block size to a not page aligned value
] set allocation area of the first block to be non page-aligned
] clear the previous used flag of the first block
] mark last block as free
] set invalid next block for last block
] testing the _Heap_Walk_check_free_list() function
] no free blocks
] create a loop in the free list
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/heapwalk/init.c: 57 retval == expectet_retval
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[107/590] p:94 f:8 u:1 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: i2c01.exe
<<skipping passes>>
[162/590] p:146 f:8 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psx10.exe
Result: failed Time: 0:00:07.995334 psx10.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:31:12 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 46590 Bytes = 45.50 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psx10.exe.img
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *####
] 2.8 MiB/s
] done
] Bytes transferred = 46654 (b63e hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:31:12 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 46590 Bytes = 45.5 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: PSX 10
] *** BEGIN OF TEST PSX 10 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init: pthread_condattr_init
] Init: pthread_condattr_init - EINVAL (attribute invalid)
] Init: pthread_condattr_destroy
] Init: pthread_condattr_destroy - EINVAL (attribute invalid)
] Init: pthread_condattr_init
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_SHARED
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_PRIVATE
] Init: pthread_condattr_setpshared - EINVAL (attribute invalid)
] Init: pthread_condattr_setpshared - EINVAL (pshared invalid)
] Init: pthread_condattr_getpshared - 0
] Init: pthread_condattr_getpshared - EINVAL (attribute invalid)
] Init: pthread_cond_init - NULL attr
] Init: pthread_cond_init - EINVAL (attr not initialized)
] Init: pthread_cond_destroy - EINVAL (cond invalid)
] Init: pthread_cond_init - EINVAL (invalid pshared)
] Init: pthread_condattr_setpshared - PTHREAD_PROCESS_SHARED
] Init: pthread_cond_init - OK
] Init: pthread_cond_destroy - OK
] Init: pthread_cond_init - attr
]
] Init: sleep to switch to Task_1
] Task_1: ID is 0x0b010002
] Task_1: pthread_cond_wait
] status = 0
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/psxtests/psx10/init.c: 267 status == EBUSY
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08b010001
] executing thread name:
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (6 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[163/590] p:146 f:9 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psx11.exe
<<skipping passes>>
[207/590] p:190 f:9 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psxinttypes01.exe
Result: failed Time: 0:00:15.305997 psxinttypes01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 20:42:28 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 48267 Bytes = 47.14 KiB = 0.05 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/psxtests/psxinttypes01.exe.img
] T ####
] 8.8 KiB/s
] done
] Bytes transferred = 48331 (bccb hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 10:42:28 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 48267 Bytes = 47.1 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: PSXINTTYPE 01
] *** BEGIN OF TEST PSXINTTYPE 01 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] strtoimax Testcases....
] Valid Inputs - Positive Number
] Final string pointed by endptr
] Valid Inputs - Negative Number
] Final string pointed by endptr
] Valid Input - Positive Number - Number out of Range
] Valid Input - Negative Number - Number out of Range
] Invalid Input - Send NULL Pointer
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80102600 R8 = 0x0000000a
] R1 = 0x80057c05 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x0000000a R11 = 0x00000000
] R4 = 0x80102390 R12 = 0x01010101
] R5 = 0x00000000 SP = 0x80105ad0
] R6 = 0x00000000 LR = 0x80000694
] R7 = 0x00000000 PC = 0x80012b74
] CPSR = 0x60000113 VEC = 0x00000004
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[208/590] p:190 f:10 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: psxitimer.exe
<<skipping passes>>
[404/590] p:384 f:10 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spcache01.exe
Result: failed Time: 0:00:15.930494 spcache01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 21:38:51 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 41710 Bytes = 40.73 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spcache01.exe.img
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.7 MiB/s
] done
] Bytes transferred = 41774 (a32e hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 11:38:51 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 41710 Bytes = 40.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPCACHE 1
] *** BEGIN OF TEST SPCACHE 1 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] data cache flush and invalidate test
] data cache operations by line passed the test (copy-back cache detected)
] data cache line size 32 bytes
] data cache size 262144 bytes
] data cache level 1 size 262144 bytes
] load 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] load 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] store 4096 bytes with flush entire data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with flush multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with flushed cache 1 ns
] store 4096 bytes with invalidate multiple data
] duration with normal cache 1 ns
] duration with warm cache 1 ns
] duration with invalidated cache 1 ns
] instruction cache line size 32 bytes
] instruction cache size 16 bytes
] instruction cache level 1 size 16 bytes
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x00000001 R8 = 0x60000113
] R1 = 0x00000000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x800111a4
] R3 = 0x20c5187d R11 = 0x80011130
] R4 = 0x00000001 R12 = 0x0000001f
] R5 = 0x00000000 SP = 0x80106d48
] R6 = 0x00000001 LR = 0x80001864
] R7 = 0x00000000 PC = 0x8000266c
] CPSR = 0x00000193 VEC = 0x00000001
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[405/590] p:384 f:11 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spcbssched01.exe
<<skipping passes>>
[412/590] p:391 f:11 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spconfig02.exe
Result: failed Time: 0:00:15.729046 spconfig02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 21:41:30 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 36217 Bytes = 35.37 KiB = 0.03 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spconfig02.exe.img
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.7 MiB/s
] done
] Bytes transferred = 36281 (8db9 hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 11:41:30 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 36217 Bytes = 35.4 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPCONFIG 2
] *** BEGIN OF TEST SPCONFIG 2 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spconfig02/init.c: 378 name_of_id == rtems_build_name('I', 'D', 'L', 'E')
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
=> tftp: re-requesting exe; target must have reset
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
[413/590] p:391 f:12 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spconsole01.exe
<<skipping passes>>
[469/590] p:447 f:12 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical05.exe
Result: failed Time: 0:00:55.984215 spintrcritical05.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical05.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical05.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical05.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 21:58:24 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 43739 Bytes = 42.71 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical05.exe.img
] T ###
] 7.8 KiB/s
] done
] Bytes transferred = 43803 (ab1b hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 11:58:24 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 43739 Bytes = 42.7 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 5
] *** BEGIN OF TEST SPINTRCRITICAL 5 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init - Trying to generate semaphore release from ISR while blocking
] Init - Variation is: Priority/Without Timeout (Reverse)
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[470/590] p:447 f:13 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical06.exe
<<skipping passes>>
[474/590] p:451 f:13 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical10.exe
Result: failed Time: 0:00:47.528689 spintrcritical10.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 22:03:21 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 42411 Bytes = 41.42 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical10.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (6 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.7 MiB/s
] done
] Bytes transferred = 42475 (a5eb hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 12:03:21 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 42411 Bytes = 41.4 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 10
] *** BEGIN OF TEST SPINTRCRITICAL 10 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init - Trying to generate any satisfied before timeout while blocking on event
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spintrcritical10/init.c: 144 ctx->hit
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
[475/590] p:451 f:14 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical11.exe
<<skipping passes>>
[480/590] p:456 f:14 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical16.exe
Result: failed Time: 0:01:09.219272 spintrcritical16.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical16.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical16.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical16.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 22:07:50 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 43660 Bytes = 42.64 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/sptests/spintrcritical16.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (10 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.8 MiB/s
] done
] Bytes transferred = 43724 (aacc hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 12:07:50 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 43660 Bytes = 42.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: SPINTRCRITICAL 16
] *** BEGIN OF TEST SPINTRCRITICAL 16 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] Init - Trying to generate timeout of a thread that had its blocking
] Init - request satisfied while blocking but before time timeout
] Init - rtems_semaphore_create - OK
] Init - Case not hit - ran too long
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
[481/590] p:456 f:15 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: spintrcritical18.exe
<<skipping passes>>
[586/590] p:561 f:15 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: tmcontext01.exe
Result: failed Time: 0:00:22.348792 tmcontext01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 22:37:32 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 39262 Bytes = 38.34 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] Could not get PHY for cpsw: addr 0
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] Wrong Image Format for bootm command
=> target reset condition detected
=> target reset: cs-pw-ctl 1 toggle-on 1 5
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x5
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmcontext01.exe.img
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 4 ms (45.9 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (9 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
] Loading: *###
] 2.7 MiB/s
] done
] Bytes transferred = 39326 (999e hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 12:37:32 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 39262 Bytes = 38.3 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: TMCONTEXT 1
] *** BEGIN OF TEST TMCONTEXT 1 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] <Test>
] <ContextSwitchTest environment="normal">
] <Sample functionNestLevel="0">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="1">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="2">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="3">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="4">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="5">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="6">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="7">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="8">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="9">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="10">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="11">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="12">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="13">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="14">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] <Sample functionNestLevel="15">
] <Min unit="ns">1</Min><Q1 unit="ns">1</Q1><Q2 unit="ns">1</Q2><Q3 unit="ns">1</Q3><Max unit="ns">1</Max>
] </Sample>
] </ContextSwitchTest>
] <ContextSwitchTest environment="dirty">
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x00010000 R8 = 0x00000001
] R1 = 0x00010000 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x80114c7c
] R4 = 0x00000000 R12 = 0x00000008
] R5 = 0x00000000 SP = 0x80114c58
] R6 = 0x00000000 LR = 0x8000065c
] R7 = 0x00000020 PC = 0x80000c74
] CPSR = 0x00000193 VEC = 0x00000001
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
] board_name=[A335BNLT] ...
] board_rev=[000B] ...
] switch to partitions #0, OK
] mmc0 is current device
] SD/MMC found on device 0
] ** Bad device 0:2 0x82000000 **
] ** Bad device 0:2 0x82000000 **
] switch to partitions #0, OK
] mmc0 is current device
] Scanning mmc 0:1...
] gpio: pin 56 (gpio 56) value is 0
] gpio: pin 55 (gpio 55) value is 0
] gpio: pin 54 (gpio 54) value is 0
] gpio: pin 53 (gpio 53) value is 1
] switch to partitions #0, OK
] mmc0 is current device
] gpio: pin 54 (gpio 54) value is 1
] Checking for: /uEnv.txt ...
] reading uEnv.txt
] 189 bytes read in 3 ms (61.5 KiB/s)
] gpio: pin 55 (gpio 55) value is 1
] Loaded environment from /uEnv.txt
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] gpio: pin 56 (gpio 56) value is 1
] Running uenvcmd ...
] Booting RTEMS BBB from net
] link up on port 0, speed 100, full duplex
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.201 (11 ms)
] link up on port 0, speed 100, full duplex
] Using cpsw device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.201
] Filename 'bbb/rtems.img'.
] Load address: 0x82000000
[587/590] p:561 f:16 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: tmfine01.exe
<<skipping passes>>
[590/590] p:564 f:16 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/beagleboneblack: tmtimer01.exe
Result: failed Time: 0:00:10.297759 tmtimer01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe.img
=> target pretest: rtems-bbb-mkimg arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe
=> Image: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 22:38:54 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 40508 Bytes = 39.56 KiB = 0.04 MiB
=> Load Address: 80000000
=> Entry Point: 80000000
=> tftp: arm-rtems5/c/beagleboneblack/testsuites/tmtests/tmtimer01.exe.img
] T ###
] 7.8 KiB/s
] done
] Bytes transferred = 40572 (9e7c hex)
] ## Booting kernel from Legacy Image at 82000000 ...
] Image Name: RTEMS
] Created: 2019-07-26 12:38:54 UTC
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 40508 Bytes = 39.6 KiB
] Load Address: 80000000
] Entry Point: 80000000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 80000000) ...
]
] RTEMS Beagleboard: am335x-based
]
]
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] <TMTimer01 timerCount="62784">
] <Sample>
] <ActiveTimers>0</ActiveTimers>
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x80103434 R8 = 0x00000020
] R1 = 0x0000fff8 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x20c5187d R11 = 0x00000000
] R4 = 0x12010001 R12 = 0x00010000
] R5 = 0x8000fad8 SP = 0x801063c0
] R6 = 0x00000000 LR = 0x80000574
] R7 = 0x00000008 PC = 0x80000ffc
] CPSR = 0x00000113 VEC = 0x00000001
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
=> target start detected
] U-Boot SPL 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17)
] Trying to boot from MMC2
]
]
] U-Boot 2017.09-00003-g11d92ba68a (Sep 21 2017 - 10:40:17 -0500), Build: jenkins-github_Bootloader-Builder-602
]
] CPU : AM335X-GP rev 2.1
] I2C: ready
] DRAM: 512 MiB
] No match for driver 'omap_hsmmc'
] No match for driver 'omap_hsmmc'
] Some drivers were not found
] Reset Source: Global warm SW reset has occurred.
] Reset Source: Power-on reset has occurred.
] MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
] Using default environment
]
] Board: BeagleBone Black
] <ethaddr> not set. Validating first E-fuse MAC
] BeagleBone Black:
] BeagleBone: cape eeprom: i2c_probe: 0x54:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x55:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x56:
] Timed out in wait_for_bb: status=1000
] BeagleBone: cape eeprom: i2c_probe: 0x57:
] Net: eth0: MII MODE
] cpsw
] Press SPACE to abort autoboot in 2 seconds
=> target off: cs-pw-ctl 1 off 1
Passed: 564
Failed: 17
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
debugger01.exe
dl01.exe
dl02.exe
dl05.exe
dl07.exe
dl08.exe
dl09.exe
heapwalk.exe
psx10.exe
psxinttypes01.exe
spcache01.exe
spconfig02.exe
spintrcritical05.exe
spintrcritical10.exe
spintrcritical16.exe
tmcontext01.exe
tmtimer01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Average test time: 0:00:17.438223
Testing time : 2:51:28.551279
More information about the build
mailing list