[rtems-test] arm/xilinx_zynq_zedboard: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:572 Failed:6 Timeout:0 Invalid:3 Wrong:0
Chris Johns
chrisj at rtems.org
Fri Jul 26 14:52:00 UTC 2019
Testing time : 2:11:09.561540
Average test time: 0:00:13.338240
Host
====
FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
Configuration
=============
Version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
Summary
=======
Passed: 572
Failed: 6
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 3
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
dl09.exe
heapwalk.exe
psxinttypes01.exe
spconfig02.exe
spconsole01.exe
spcpucounter01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Invalid:
spinternalerror01.exe
spsysinit01.exe
sptimecounter01.exe
Log
===
RTEMS Testing - Tester, 5.0.not_released
Command Line: /opt/work/rtems/5/bin/rtems-test --user-config=/home/chris/.rtemstesterrc --mail --mail-to=build at rtems.org --rtems-bsp=xilinx_zynq_zedboard --log=../{bsp}.log arm-rtems5/c/xilinx_zynq_zedboard/testsuites
Host: FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64
Python: 3.6.6 (default, Oct 2 2018, 01:22:29) [GCC 4.2.1 Compatible FreeBSD Clang 6.0.0 (tags/RELEASE_600/final 326565)]
Host: FreeBSD-12.0-RELEASE-p3-amd64-64bit-ELF (FreeBSD ruru 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3 GENERIC amd64 amd64)
[ 1/590] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: dhrystone.exe
<<skipping passes>>
[ 98/590] p:94 f:0 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: dl09.exe
Result: failed Time: 0:00:08.633162 dl09.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl09.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl09.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl09.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 23:00:47 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 106127 Bytes = 103.64 KiB = 0.10 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (256 ms)
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/dl09.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *########
] 7.2 MiB/s
] done
] Bytes transferred = 106191 (19ecf hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 106127 Bytes = 103.6 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: libdl (RTL) 9
] *** BEGIN OF TEST libdl (RTL) 9 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
] handel: 0x22b160: unresolved externals
] handle: 0x22b160 loaded
] space alloc: /dl09-o1.o: 33554432: 0x22c678
] load: /dl09-o2.o
] handel: 0x222c6d0: unresolved externals
] handle: 0x222c6d0 loaded
] space alloc: /dl09-o2.o: 33554432: 0x222d708
] load: /dl09-o3.o
] handel: 0x422d760: unresolved externals
] handle: 0x422d760 loaded
] space alloc: /dl09-o3.o: 33554432: 0x422e6a0
] load: /dl09-o4.o
] handel: 0x622e6f8: unresolved externals
] handle: 0x622e6f8 loaded
] space alloc: /dl09-o4.o: 33554432: 0x622fcb8
] load: /dl09-o5.o
] handel: 0x822fd10: no unresolved externals
] handle: 0x822fd10 loaded
] handel: 0x822fd10: no unresolved externals
] Check is any unresolved externals exist:
] handel: 0xfffffffd: no unresolved externals
] Running rtems_main_o1:
] dlo1: module: testsuites/libtests/dl09/dl-o1.c @ 0x22c071
] dlo1: dl01_bss1: 4: 0x22c440: 0
] dlo1: dl01_bss2: 4: 0x22c444: %f
] dlo1: dl01_bss3: 1: 0x22c4bc: 00
] dlo1: dl01_data1: 4: 0x22c410: 1
] dlo1: dl01_data2: 4: 0x22c414: %f
] dlo1: dl01_const1: 4: 0x22c1e0: 3
] dlo1: dl01_const2: 4: 0x22c1e4: %f
] dlo1: dl01_func1: 1: 0x22c069
] dlo1: rtems_main_o2: 0x222d201
] dlo2: module: testsuites/libtests/dl09/dl-o2.c @ 0x222d201
] dlo2: dl02_bss1: 4: 0x222d4b8: 0
] dlo2: dl02_bss2: 4: 0x222d4bc: %f
] dlo2: dl02_bss3: 1: 0x222d4d8: 00
] dlo2: dl02_data1: 4: 0x222d488: 12345678
] dlo2: dl02_data2: 4: 0x222d4f0: %f
] dlo3: module: testsuites/libtests/dl09/dl-o3.c : 0x422e131
] dlo3: dl04_unresolv_1: 4: 0x622fa90: 12345
] dlo3: dl04_unresolv_2: 4: 0x622fac8: %f
] dlo3: dl04_unresolv_3: 1: 0x622fa94: 7a
] dlo3: dl04_unresolv_4: 4: 0x622fa98: 0x622fa34
] dlo3: dl04_unresolv_5: 4: 0x622f8c8: 4
] dlo3: dl04_unresolv_6: 4: 0x622fa9c: dl-O4
] dlo3: dl05_unresolv_1: 8: 0x8230a18: 0
] dlo3: dl05_unresolv_2: 2: 0x8230a20: 0
] dlo3: dl05_unresolv_3: 4: 0x8230a24: 0
] dlo3: dl05_unresolv_4: 1: 0x8230a28: 0
] dlo3: dl05_unresolv_5: 8: 0x8230a30: 0
] dlo4: module: testsuites/libtests/dl09/dl-o4.c @ 0x622f7b9
] dlo4: dl04_unresolv_1: 4: 0x622fa90: 12345
] dlo4: dl04_unresolv_2: 4: 0x622fac8: %f
] dlo4: dl04_unresolv_3: 1: 0x622fa94: 7a
] dlo4: dl04_unresolv_4: 4: 0x622fa98: aBcDeF
] dlo4: dl04_unresolv_5: 4: 0x622f8c8: 4
] dlo4: dl04_unresolv_6: 4: 0x622fa9c: dl-O4
] dlo5: module: testsuites/libtests/dl09/dl-o5.c @ 0x8230791
] dlo5: dl05_unresolv_1: 8: 0x8230a18: 0
] dlo5: dl05_unresolv_2: 2: 0x8230a20: 0
] dlo5: dl05_unresolv_3: 4: 0x8230a24: 0
] dlo5: dl05_unresolv_4: 1: 0x8230a28: 0
] dlo5: dl05_unresolv_5: 8: 0x8230a30: 0
] handle: 0x22b160 closing
] space dealloc: 0x22c678
] handle: 0x222c6d0 closing
] space dealloc: 0x222d708
] handle: 0x422d760 closing
] space dealloc: 0x422e6a0
] handle: 0x622e6f8 closing
] space dealloc: 0x622fcb8
] handle: 0x822fd10 closing
] space dealloc: 0
] --------------------------------------------------
] Run: 1
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
] handel: 0x8230c78: unresolved externals
] handle: 0x8230c78 loaded
] space alloc: /dl09-o1.o: 33554432: 0x82321e0
] load: /dl09-o2.o
] handel: 0xa232238: unresolved externals
] handle: 0xa232238 loaded
] space alloc: /dl09-o2.o: 33554432: 0xa233270
] load: /dl09-o3.o
] handel: 0xc2332c8: unresolved externals
] handle: 0xc2332c8 loaded
] space alloc: /dl09-o3.o: 33554432: 0xc234208
] load: /dl09-o4.o
] handel: 0xe234260: unresolved externals
] handle: 0xe234260 loaded
] space alloc: /dl09-o4.o: 33554432: 0xe235820
] load: /dl09-o5.o
] handel: 0x10235878: no unresolved externals
] handle: 0x10235878 loaded
] handel: 0x10235878: no unresolved externals
] Check is any unresolved externals exist:
] handel: 0xfffffffd: no unresolved externals
] Running rtems_main_o1:
] dlo1: module: testsuites/libtests/dl09/dl-o1.c @ 0x8231b89
] dlo1: dl01_bss1: 4: 0x8231f58: 0
] dlo1: dl01_bss2: 4: 0x8231f5c: %f
] dlo1: dl01_bss3: 1: 0x8231fd4: 00
] dlo1: dl01_data1: 4: 0x8231f28: 1
] dlo1: dl01_data2: 4: 0x8231f2c: %f
] dlo1: dl01_const1: 4: 0x8231cf8: 3
] dlo1: dl01_const2: 4: 0x8231cfc: %f
] dlo1: dl01_func1: 1: 0x8231b81
] dlo1: rtems_main_o2: 0xa232d69
] dlo2: module: testsuites/libtests/dl09/dl-o2.c @ 0xa232d69
] dlo2: dl02_bss1: 4: 0xa233020: 0
] dlo2: dl02_bss2: 4: 0xa233024: %f
] dlo2: dl02_bss3: 1: 0xa233040: 00
] dlo2: dl02_data1: 4: 0xa232ff0: 12345678
] dlo2: dl02_data2: 4: 0xa233058: %f
] dlo3: module: testsuites/libtests/dl09/dl-o3.c : 0xc233c99
] dlo3: dl04_unresolv_1: 4: 0xe2355f8: 12345
] dlo3: dl04_unresolv_2: 4: 0xe235630: %f
] dlo3: dl04_unresolv_3: 1: 0xe2355fc: 7a
] dlo3: dl04_unresolv_4: 4: 0xe235600: 0xe23559c
] dlo3: dl04_unresolv_5: 4: 0xe235430: 4
] dlo3: dl04_unresolv_6: 4: 0xe235604: dl-O4
] dlo3: dl05_unresolv_1: 8: 0x10236580: 0
] dlo3: dl05_unresolv_2: 2: 0x10236588: 0
] dlo3: dl05_unresolv_3: 4: 0x1023658c: 0
] dlo3: dl05_unresolv_4: 1: 0x10236590: 0
] dlo3: dl05_unresolv_5: 8: 0x10236598: 0
] dlo4: module: testsuites/libtests/dl09/dl-o4.c @ 0xe235321
] dlo4: dl04_unresolv_1: 4: 0xe2355f8: 12345
] dlo4: dl04_unresolv_2: 4: 0xe235630: %f
] dlo4: dl04_unresolv_3: 1: 0xe2355fc: 7a
] dlo4: dl04_unresolv_4: 4: 0xe235600: aBcDeF
] dlo4: dl04_unresolv_5: 4: 0xe235430: 4
] dlo4: dl04_unresolv_6: 4: 0xe235604: dl-O4
] dlo5: module: testsuites/libtests/dl09/dl-o5.c @ 0x102362f9
] dlo5: dl05_unresolv_1: 8: 0x10236580: 0
] dlo5: dl05_unresolv_2: 2: 0x10236588: 0
] dlo5: dl05_unresolv_3: 4: 0x1023658c: 0
] dlo5: dl05_unresolv_4: 1: 0x10236590: 0
] dlo5: dl05_unresolv_5: 8: 0x10236598: 0
] handle: 0x8230c78 closing
] space dealloc: 0x82321e0
] handle: 0xa232238 closing
] space dealloc: 0xa233270
] handle: 0xc2332c8 closing
] space dealloc: 0xc234208
] handle: 0xe234260 closing
] space dealloc: 0xe235820
] handle: 0x10235878 closing
] space dealloc: 0
] --------------------------------------------------
] Run: 2
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
] handel: 0x102367e0: unresolved externals
] handle: 0x102367e0 loaded
] space alloc: /dl09-o1.o: 33554432: 0x10237d48
] load: /dl09-o2.o
] handel: 0x12237da0: unresolved externals
] handle: 0x12237da0 loaded
] space alloc: /dl09-o2.o: 33554432: 0x12238dd8
] load: /dl09-o3.o
] handel: 0x14238e30: unresolved externals
] handle: 0x14238e30 loaded
] space alloc: /dl09-o3.o: 33554432: 0x14239d70
] load: /dl09-o4.o
] handel: 0x16239dc8: unresolved externals
] handle: 0x16239dc8 loaded
] space alloc: /dl09-o4.o: 33554432: 0x1623b388
] load: /dl09-o5.o
] handel: 0x1823b3e0: no unresolved externals
] handle: 0x1823b3e0 loaded
] handel: 0x1823b3e0: no unresolved externals
] Check is any unresolved externals exist:
] handel: 0xfffffffd: no unresolved externals
] Running rtems_main_o1:
] dlo1: module: testsuites/libtests/dl09/dl-o1.c @ 0x102376f1
] dlo1: dl01_bss1: 4: 0x10237ac0: 0
] dlo1: dl01_bss2: 4: 0x10237ac4: %f
] dlo1: dl01_bss3: 1: 0x10237b3c: 00
] dlo1: dl01_data1: 4: 0x10237a90: 1
] dlo1: dl01_data2: 4: 0x10237a94: %f
] dlo1: dl01_const1: 4: 0x10237860: 3
] dlo1: dl01_const2: 4: 0x10237864: %f
] dlo1: dl01_func1: 1: 0x102376e9
] dlo1: rtems_main_o2: 0x122388d1
] dlo2: module: testsuites/libtests/dl09/dl-o2.c @ 0x122388d1
] dlo2: dl02_bss1: 4: 0x12238b88: 0
] dlo2: dl02_bss2: 4: 0x12238b8c: %f
] dlo2: dl02_bss3: 1: 0x12238ba8: 00
] dlo2: dl02_data1: 4: 0x12238b58: 12345678
] dlo2: dl02_data2: 4: 0x12238bc0: %f
] dlo3: module: testsuites/libtests/dl09/dl-o3.c : 0x14239801
] dlo3: dl04_unresolv_1: 4: 0x1623b160: 12345
] dlo3: dl04_unresolv_2: 4: 0x1623b198: %f
] dlo3: dl04_unresolv_3: 1: 0x1623b164: 7a
] dlo3: dl04_unresolv_4: 4: 0x1623b168: 0x1623b104
] dlo3: dl04_unresolv_5: 4: 0x1623af98: 4
] dlo3: dl04_unresolv_6: 4: 0x1623b16c: dl-O4
] dlo3: dl05_unresolv_1: 8: 0x1823c0e8: 0
] dlo3: dl05_unresolv_2: 2: 0x1823c0f0: 0
] dlo3: dl05_unresolv_3: 4: 0x1823c0f4: 0
] dlo3: dl05_unresolv_4: 1: 0x1823c0f8: 0
] dlo3: dl05_unresolv_5: 8: 0x1823c100: 0
] dlo4: module: testsuites/libtests/dl09/dl-o4.c @ 0x1623ae89
] dlo4: dl04_unresolv_1: 4: 0x1623b160: 12345
] dlo4: dl04_unresolv_2: 4: 0x1623b198: %f
] dlo4: dl04_unresolv_3: 1: 0x1623b164: 7a
] dlo4: dl04_unresolv_4: 4: 0x1623b168: aBcDeF
] dlo4: dl04_unresolv_5: 4: 0x1623af98: 4
] dlo4: dl04_unresolv_6: 4: 0x1623b16c: dl-O4
] dlo5: module: testsuites/libtests/dl09/dl-o5.c @ 0x1823be61
] dlo5: dl05_unresolv_1: 8: 0x1823c0e8: 0
] dlo5: dl05_unresolv_2: 2: 0x1823c0f0: 0
] dlo5: dl05_unresolv_3: 4: 0x1823c0f4: 0
] dlo5: dl05_unresolv_4: 1: 0x1823c0f8: 0
] dlo5: dl05_unresolv_5: 8: 0x1823c100: 0
] handle: 0x102367e0 closing
] space dealloc: 0x10237d48
] handle: 0x12237da0 closing
] space dealloc: 0x12238dd8
] handle: 0x14238e30 closing
] space dealloc: 0x14239d70
] handle: 0x16239dc8 closing
] space dealloc: 0x1623b388
] handle: 0x1823b3e0 closing
] space dealloc: 0
] --------------------------------------------------
] Run: 3
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] load: /dl09-o1.o
] handel: 0x1823c348: unresolved externals
] handle: 0x1823c348 loaded
] space alloc: /dl09-o1.o: 33554432: 0x1823d8b0
] load: /dl09-o2.o
] handel: 0x1a23d908: unresolved externals
] handle: 0x1a23d908 loaded
] space alloc: /dl09-o2.o: 33554432: 0x1a23e940
] load: /dl09-o3.o
] handel: 0x1c23e998: unresolved externals
] handle: 0x1c23e998 loaded
] space alloc: /dl09-o3.o: 33554432: 0x1c23f8d8
] load: /dl09-o4.o
] handel: 0x1e23f930: unresolved externals
] handle: 0x1e23f930 loaded
]
] *** FATAL ***
] fatal source: 0 (INTERNAL_ERROR_CORE)
] fatal code: 3735928559 (?)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP server died; starting again
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[ 99/590] p:94 f:1 u:0 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: dl10.exe
<<skipping passes>>
[106/590] p:100 f:1 u:1 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: heapwalk.exe
Result: failed Time: 0:00:08.066592 heapwalk.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/heapwalk.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/heapwalk.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/heapwalk.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 23:02:27 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 40662 Bytes = 39.71 KiB = 0.04 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] ..... done
] BOOTP broadcast 1
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/libtests/heapwalk.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *###
] 3.9 MiB/s
] done
] Bytes transferred = 40726 (9f16 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 40662 Bytes = 39.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: HEAPWALK
] *** BEGIN OF TEST HEAPWALK ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] start with a system state != SYSTEM_STATE_UP
] testing the _Heap_Walk_check_control() function
] test what happens if page size = 0
] set page size to a not CPU-aligned value
] set minimal block size to a not page aligned value
] set allocation area of the first block to be non page-aligned
] clear the previous used flag of the first block
] mark last block as free
] set invalid next block for last block
] testing the _Heap_Walk_check_free_list() function
] no free blocks
] create a loop in the free list
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/libtests/heapwalk/init.c: 57 retval == expectet_retval
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
=> tftp: re-requesting exe; target must have reset
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[107/590] p:100 f:2 u:1 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: i2c01.exe
<<skipping passes>>
[207/590] p:197 f:2 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: psxinttypes01.exe
Result: failed Time: 0:00:08.500810 psxinttypes01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/psxtests/psxinttypes01.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/psxtests/psxinttypes01.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/psxtests/psxinttypes01.exe
=> Image Name: RTEMS
=> Created: Fri Jul 26 23:22:05 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 45289 Bytes = 44.23 KiB = 0.04 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/psxtests/psxinttypes01.exe.img
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4.3 MiB/s
] done
] Bytes transferred = 45353 (b129 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 45289 Bytes = 44.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: PSXINTTYPE 01
] *** BEGIN OF TEST PSXINTTYPE 01 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
]
] strtoimax Testcases....
] Valid Inputs - Positive Number
] Final string pointed by endptr
] Valid Inputs - Negative Number
] Final string pointed by endptr
] Valid Input - Positive Number - Number out of Range
] Valid Input - Negative Number - Number out of Range
] Invalid Input - Send NULL Pointer
]
] *** FATAL ***
] fatal source: 9 (RTEMS_FATAL_SOURCE_EXCEPTION)
]
] R0 = 0x00202640 R8 = 0x00000000
] R1 = 0x00116c05 R9 = 0x00000000
] R2 = 0x00000000 R10 = 0x00000000
] R3 = 0x0000000a R11 = 0x00000000
] R4 = 0x00202390 R12 = 0xffffffff
] R5 = 0x00000000 SP = 0x002059d0
] R6 = 0x0000000a LR = 0x00104813
] R7 = 0x00000000 PC = 0x00111d3c
] CPSR = 0x600f0173 VEC = 0x00000004
] FPEXC = 0x40000000
] FPSCR = 0x00000000
] D00 = 0x000000000010ed9b
] D01 = 0x0010ed9bffffffff
] D02 = 0xffffffff00000000
] D03 = 0x000000000010ed9b
] D04 = 0x0010ed9bffffffff
] D05 = 0xffffffff00000000
] D06 = 0x000000000010ed9b
] D07 = 0x0010ed9bffffffff
] D08 = 0x0000000000000000
] D09 = 0x0000000000000000
] D10 = 0x0000000000000000
] D11 = 0x0000000000000000
] D12 = 0x0000000000000000
] D13 = 0x0000000000000000
] D14 = 0x0000000000000000
] D15 = 0x0000000000000000
] D16 = 0x0ccccccccccccccc
] D17 = 0x8000000000000000
] D18 = 0x0034811010280400
] D19 = 0x2054860040412a36
] D20 = 0x0902a10000588102
] D21 = 0x0211200002394043
] D22 = 0x8880a4c000011944
] D23 = 0xa0b1856094210212
] D24 = 0x840033a480a51d38
] D25 = 0x193a488802400506
] D26 = 0x6108048800854408
] D27 = 0x130250480e491001
] D28 = 0x0007a45404002000
] D29 = 0x2000027400020b09
] D30 = 0x0226060a0d500000
] D31 = 0x4228080000004014
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
=> tftp: re-requesting exe; target must have reset
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[208/590] p:197 f:3 u:4 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: psxitimer.exe
<<skipping passes>>
[412/590] p:399 f:3 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: spconfig02.exe
Result: failed Time: 0:00:07.439809 spconfig02.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconfig02.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconfig02.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconfig02.exe
=> Image Name: RTEMS
=> Created: Sat Jul 27 00:14:28 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 36676 Bytes = 35.82 KiB = 0.03 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconfig02.exe.img
] .... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (10 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *###
] 3.5 MiB/s
] done
] Bytes transferred = 36740 (8f84 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 36676 Bytes = 35.8 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPCONFIG 2
] *** BEGIN OF TEST SPCONFIG 2 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spconfig02/init.c: 378 name_of_id == rtems_build_name('I', 'D', 'L', 'E')
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
=> tftp: re-requesting exe; target must have reset
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] DHCP client bound to address 10.10.5.144 (8 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[413/590] p:399 f:4 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: spconsole01.exe
Result: failed Time: 0:00:07.426801 spconsole01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe
=> Image Name: RTEMS
=> Created: Sat Jul 27 00:14:36 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 62877 Bytes = 61.40 KiB = 0.06 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spconsole01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (266 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *#####
] 4 MiB/s
] done
] Bytes transferred = 62941 (f5dd hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 62877 Bytes = 61.4 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPCONSOLE 1
] *** BEGIN OF TEST SPCONSOLE 1 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spconsole01/init.c: 244 rv == 0
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
=> tftp: re-requesting exe; target must have reset
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[414/590] p:399 f:5 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: spcontext01.exe
<<skipping passes>>
[416/590] p:401 f:5 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: spcpucounter01.exe
Result: failed Time: 0:00:07.463396 spcpucounter01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spcpucounter01.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spcpucounter01.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spcpucounter01.exe
=> Image Name: RTEMS
=> Created: Sat Jul 27 00:16:01 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 54450 Bytes = 53.17 KiB = 0.05 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] ... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spcpucounter01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 4 MiB/s
] done
] Bytes transferred = 54514 (d4f2 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 54450 Bytes = 53.2 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
]
]
=> test start: SPCPUCOUNTER 1
] *** BEGIN OF TEST SPCPUCOUNTER 1 ***
] *** TEST VERSION: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] *** TEST STATE: EXPECTED-PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] CPU counter frequency: 666666667Hz
] nanoseconds for frequency count ticks: 1000000000
] /opt/work/chris/rtems/kernel/rtems.git/c/src/../../testsuites/sptests/spcpucounter01/init.c: 73 frequency == frequency2
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
=> tftp: re-requesting exe; target must have reset
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete....... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
=> target start detected
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[417/590] p:401 f:6 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: spcpuset01.exe
<<skipping passes>>
[462/590] p:446 f:6 u:6 e:0 I:0 B:3 t:0 i:0 W:0 | arm/xilinx_zynq_zedboard: spinternalerror01.exe
Result: invalid Time: 0:00:07.979089 spinternalerror01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe
=> Image Name: RTEMS
=> Created: Sat Jul 27 00:24:26 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 24607 Bytes = 24.03 KiB = 0.02 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] ..... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spinternalerror01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 3.9 MiB/s
] done
] Bytes transferred = 24671 (605f hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 24607 Bytes = 24 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4*8 PA
] "
] 1**<5 %64"3V3"9&(* -2*I
] B
] c>(9 B
] c>
] C )<L72116(B
] c at 25
] &f00"!2&8,103J
] *PA
] "
] 1*(*
] *a!
] ,6%Z93v (
] ,I 5f 60205!(L5 %64"3V3"9&(B
] c@{/72116(B
] c at 25
] &f00"!2&8,103JQ5K4)$a(
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (260 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[463/590] p:446 f:6 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/xilinx_zynq_zedboard: spinternalerror02.exe
<<skipping passes>>
[524/590] p:507 f:6 u:6 e:0 I:0 B:3 t:0 i:1 W:0 | arm/xilinx_zynq_zedboard: spsysinit01.exe
Result: invalid Time: 0:00:08.010710 spsysinit01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe
=> Image Name: RTEMS
=> Created: Sat Jul 27 00:42:14 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 50875 Bytes = 49.68 KiB = 0.05 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (260 ms)
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/spsysinit01.exe.img
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *####
] 5.4 MiB/s
] done
] Bytes transferred = 50939 (c6fb hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 50875 Bytes = 49.7 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4*8 &f$1**<5 %64"3V3"9&(* -2*I
] B
] c>(9 B
] c>
] C )<L72116(B
] c at 25
] &f00"!2&8,103J
=> test end: None
] *** END OF TEST SPSYSINIT 1 ***
]
]
] *** FATAL ***
] fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] fatal code: 0 (0x00000000)
] RTEMS version: 5.0.0.ee0e234fdbc07a27b32eaa29347bd49417c9e32e
] RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 0956a2c089faf2600047577bb153afcaaba22288, Newlib 1d35a003f)
] executing thread ID: 0x08a010001
] executing thread name: UI1
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.144 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.144
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[525/590] p:507 f:6 u:6 e:0 I:0 B:3 t:0 i:2 W:0 | arm/xilinx_zynq_zedboard: spsyslock01.exe
<<skipping passes>>
[534/590] p:516 f:6 u:6 e:0 I:0 B:3 t:0 i:2 W:0 | arm/xilinx_zynq_zedboard: sptimecounter01.exe
Result: invalid Time: 0:00:07.949405 sptimecounter01.exe
=> target exe filter: find:\.exe subst:.exe.img -> arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe.img
=> target pretest: rtems-zynq-mkimg arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe
=> Image: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe
=> Image Name: RTEMS
=> Created: Sat Jul 27 00:43:43 2019
=> Image Type: ARM RTEMS Kernel Image (gzip compressed)
=> Data Size: 27697 Bytes = 27.05 KiB = 0.03 MiB
=> Load Address: 00104000
=> Entry Point: 00104000
] .... done
] BOOTP broadcast 1
=> tftp: arm-rtems5/c/xilinx_zynq_zedboard/testsuites/sptests/sptimecounter01.exe.img
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (259 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *##
] 4.4 MiB/s
] done
] Bytes transferred = 27761 (6c71 hex)
] ## Booting kernel from Legacy Image at 02000000 ...
] Image Name: RTEMS
] Image Type: ARM RTEMS Kernel Image (gzip compressed)
] Data Size: 27697 Bytes = 27 KiB
] Load Address: 00104000
] Entry Point: 00104000
] Verifying Checksum ... OK
] Uncompressing Kernel Image ... OK
] ## Transferring control to RTEMS (at address 00104000) ...
] 4*8 (PA@
] **<5 %64"3V3"9&(* -2*I
] B
] c>(9 B
] c>
] C )<L72116(B
] c at 25
] &f00"!2&8,103J(*(PA@
] *(*
] *a!
] ,6%5(B
] c>&T2
] Ia!
] ,I 0000(B
] c at +/5 %64"3V3"9&(B
] c@{/72116(B
] c at 25
] &f00"!2&8,103JQ5K4)$a(
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 8a:3d:5f:67:55:cb
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
] ethernet at e000b000 Waiting for PHY auto negotiation to complete...... done
] BOOTP broadcast 1
=> tftp: re-requesting exe; target must have reset
] BOOTP broadcast 2
] DHCP client bound to address 10.10.5.140 (261 ms)
] Using ethernet at e000b000 device
] TFTP from server 10.10.5.2; our IP address is 10.10.5.140
] Filename 'zed/rtems.img'.
] Load address: 0x2000000
] Loading: *
] TFTP error: 'File not found' (1)
] Not retrying...
] Wrong Image Format for bootm command
] ERROR: can't get kernel image!
] resetting ...
]
] U-Boot SPL 2016.05-00598-gb2f1858-dirty (Jun 04 2016 - 15:32:53)
] mmc boot
] Trying to boot from MMC1
] reading system.dtb
] reading uImage
] spl_load_image_fat: error reading image uImage, err - -1
] reading u-boot.img
] reading u-boot.img
]
]
] U-Boot 2017.11-rc1-00024-g39dd65a059-dirty (Oct 04 2017 - 17:10:51 +1100)
]
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] DRAM: ECC disabled 512 MiB
] MMC: sdhci at e0100000: 0
] SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB
] *** Warning - bad CRC, using default environment
]
] In: serial at e0001000
] Out: serial at e0001000
] Err: serial at e0001000
] Model: Zynq Zed Development Board
] Board: Xilinx Zynq
] Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
]
] Warning: ethernet at e000b000 (eth0) using random MAC address - 6e:3a:1c:22:aa:5f
] eth0: ethernet at e000b000
] reading uEnv.txt
] 165 bytes read in 11 ms (14.6 KiB/s)
] Importing environment from mmc ...
] Checking if uenvcmd is set ...
] Running uenvcmd ...
] Booting RTEMS from net
[535/590] p:516 f:6 u:6 e:0 I:0 B:3 t:0 i:3 W:0 | arm/xilinx_zynq_zedboard: sptimecounter02.exe
<<skipping passes>>
[590/590] p:571 f:6 u:6 e:0 I:0 B:3 t:0 i:3 W:0 | arm/xilinx_zynq_zedboard: tmtimer01.exe
Passed: 572
Failed: 6
User Input: 6
Expected Fail: 0
Indeterminate: 0
Benchmark: 3
Timeout: 0
Invalid: 3
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
------------------
Total: 590
Failures:
dl09.exe
heapwalk.exe
psxinttypes01.exe
spconfig02.exe
spconsole01.exe
spcpucounter01.exe
User Input:
dl10.exe
monitor.exe
termios.exe
top.exe
capture.exe
fileio.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Invalid:
spinternalerror01.exe
spsysinit01.exe
sptimecounter01.exe
Average test time: 0:00:13.338240
Testing time : 2:11:09.561540
More information about the build
mailing list