[rtems-test] powerpc/psim: RTEMS_POSIX_API: Passed:611 Failed:10 Timeout:19 Test-Too-long:0 Invalid:4 Wrong:0
OAR Tester for CentOS 7
rtems-tester at oarcorp.com
Mon Sep 23 17:24:14 UTC 2024
Testing time : 0:23:00.140113
Average test time: 0:00:02.041627
Host
====
Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
Build : RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
Summary
=======
Passed: 611
Failed: 10
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 19
Test too long: 0
Invalid: 4
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
spcontext01.exe
spintrcritical18.exe
tmonetoone.exe
minimum.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
flashdev01.exe
mrfs_fstime.exe
psxcancel01.exe
psxchroot01.exe
psxfile02.exe
psxkey09.exe
sp21.exe
sp51.exe
sp54.exe
spassoc01.exe
spcache01.exe
spintrcritical14.exe
spprivenv01.exe
sptimer_err01.exe
stackchk02.exe
termios08.exe
tm08.exe
ts-terminate.exe
ts-userext.exe
Invalid:
block07.exe
psxglobalcon01.exe
psxtimer_face01.exe
termios10.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
Python: 2.7.5 (default, Nov 14 2023, 16:14:06) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
[ 1/676] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/676] p:5 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:05.991885 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[ 16/676] p:5 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[ 99/676] p:70 f:1 u:0 e:17 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mrfs_fstime.exe
Result: timeout
Time: 0:03:07.947673 mrfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSTIME RFS
] *** BEGIN OF TEST FSTIME RFS ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Initializing filesystem RFS
] Sleep a few seconds
=> test end: FSTIME RFS
] *** TIMEOUT TIMEOUT
[100/676] p:71 f:1 u:0 e:18 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: tftpfs.exe
<<skipping passes>>
[107/676] p:76 f:1 u:0 e:19 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block07.exe
Result: invalid
Time: 0:00:02.168265 block07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/block07.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/block07.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block07.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block07.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block07.exe
] M: try access: 0
] I: release: 0
] I: release done: 0
] L: access: 0
] L: release: 0
] H: access: 0
] H: release: 0
] H: release done: 0
] M: access: 0
] M: release: 0
] M: release done: 0
] L: release done: 0
=> test end: None
] *** END OF TEST BLOCK 7 ***
=> test end: None
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0a010003
] executing thread name: LOW
=> [Inferior 1 (process 42000) exited with code 05]
[108/676] p:76 f:1 u:0 e:20 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block08.exe
<<skipping passes>>
[134/676] p:101 f:1 u:0 e:20 I:0 B:3 t:0 L:0 i:1 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:06.925585 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
[135/676] p:101 f:2 u:0 e:20 I:0 B:3 t:0 L:0 i:1 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[145/676] p:109 f:2 u:1 e:21 I:0 B:3 t:0 L:0 i:1 W:0 | powerpc/psim: flashdev01.exe
Result: timeout
Time: 0:03:05.634369 flashdev01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/flashdev01.exe
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/flashdev01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> Connected to the simulator.
=> test end: None
] *** TIMEOUT TIMEOUT
[146/676] p:110 f:2 u:1 e:21 I:0 B:3 t:0 L:0 i:1 W:0 | powerpc/psim: flashdisk01.exe
<<skipping passes>>
[181/676] p:142 f:2 u:2 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: stackchk02.exe
Result: timeout
Time: 0:03:05.619340 stackchk02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/stackchk02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/stackchk02.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/stackchk02.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/stackchk02.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> test end: None
] *** TIMEOUT TIMEOUT
[182/676] p:143 f:2 u:2 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: stackchk03.exe
<<skipping passes>>
[196/676] p:156 f:2 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: termios08.exe
Result: timeout
Time: 0:03:08.013253 termios08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/termios08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/termios08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TERMIOS 8
] *** BEGIN OF TEST TERMIOS 8 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] open(/dev/test) - OK
] Changing c_lflag to: non-canonical
] Changing to polling - VMIN=0 VTIME=0
] read - 0 expected
] Changing to half-second timeout - VMIN=0 VTIME=5
] read - 0 expected
] Changing to half-second timeout - VMIN=5 VTIME=3
] Enqueue 2 characters
] @&"Quit\n"
=> bt
=> No stack.
=> test end: TERMIOS 8
] *** TIMEOUT TIMEOUT
[197/676] p:157 f:2 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: termios09.exe
[198/676] p:158 f:2 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: termios10.exe
Result: invalid
Time: 0:00:02.359900 termios10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/termios10.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/termios10.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios10.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios10.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios10.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] ith ISIG enabled
] Test read for VKILL - signal caught
] Test read for VQUIT - signal caught
] Exercise POSIX ISIG handler with ISIG disabled
] Test read for VKILL - signal caught
] Test read for VQUIT - signal caught
=> test end: None
] *** END OF TEST TERMIOS 10 -- Polled ***
=> test end: None
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 05]
[199/676] p:159 f:2 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: termios11.exe
<<skipping passes>>
[217/676] p:175 f:2 u:4 e:22 I:0 B:3 t:1 L:0 i:2 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:08.794579 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
[218/676] p:176 f:2 u:4 e:22 I:0 B:3 t:1 L:0 i:2 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[232/676] p:188 f:3 u:4 e:22 I:0 B:3 t:2 L:0 i:2 W:0 | powerpc/psim: psxcancel01.exe
Result: timeout
Time: 0:03:09.539878 psxcancel01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXCANCEL 1
] *** BEGIN OF TEST PSXCANCEL 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init: schedule pthread_cancel from a TSR
] pthread_cancel - from ISR returns expected status - OK
] Init: schedule pthread_setcancelstate from a TSR
=> test end: PSXCANCEL 1
] *** TIMEOUT TIMEOUT
[233/676] p:189 f:3 u:4 e:22 I:0 B:3 t:2 L:0 i:2 W:0 | powerpc/psim: psxchroot01.exe
Result: timeout
Time: 0:03:09.841972 psxchroot01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXCHROOT 1
] *** BEGIN OF TEST PSXCHROOT 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] chroot with bad path - expect ENOENT
] chroot with file - expect ENOTDIR
] allocate most of memory - attempt to fail chroot - expect ENOMEM
] freeing the allocated memory
] SUCCESS on /one/one.test
] SUCCESS on /two/two.test
] Go back to global environment
] @"&"\n"
=> test end: PSXCHROOT 1
] *** TIMEOUT TIMEOUT
[234/676] p:190 f:3 u:4 e:22 I:0 B:3 t:2 L:0 i:2 W:0 | powerpc/psim: psxclassic01.exe
<<skipping passes>>
[254/676] p:209 f:3 u:4 e:22 I:0 B:3 t:3 L:0 i:2 W:0 | powerpc/psim: psxfile02.exe
Result: timeout
Time: 0:03:11.326577 psxfile02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXFILE 2
] *** BEGIN OF TEST PSXFILE 2 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] mkdir /tmp
] open /tmp/j
] open returned file descriptor 3
] close /tmp/j
] ftruncate an unopened file
] 9: Bad file number
] _fcntl_r an unopened file
] 9: Bad file number
] fdatasync an unopened file
] 9: Bad file number
] fstat an unopened file
] 9: Bad file number
] fsync an unopened file
] 9: Bad file number
] ioctl an unopened file
] 9: Bad file number
] _lseek_r an unopened file
] 9: Bad file number
] readv an unopened file
] 9: Bad file number
] writev an unopened file
] 9: Bad file number
] write an unopened file
] 9: Bad file number
] ftruncate a too large file descriptor
] 9: Bad file number
] _fcntl_r a too large file descriptor
] 9: Bad file number
] fdatasync a too large file descriptor
] 9: Bad file number
] fstat a too large file descriptor
] 9: Bad file number
] fsync a too large file descriptor
] 9: Bad file number
] ioctl a too large file descriptor
] 9: Bad file number
] _lseek_r a too large file descriptor
] 9: Bad file number
] readv a too large file descriptor
] 9: Bad file number
] writev a too large file descriptor
] 9: Bad file number
=> test end: PSXFILE 2
] *** TIMEOUT TIMEOUT
[255/676] p:210 f:3 u:4 e:22 I:0 B:3 t:3 L:0 i:2 W:0 | powerpc/psim: psxfilelock01.exe
<<skipping passes>>
[259/676] p:214 f:3 u:4 e:22 I:0 B:3 t:3 L:0 i:2 W:0 | powerpc/psim: psxglobalcon01.exe
Result: invalid
Time: 0:00:01.012725 psxglobalcon01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe
] N: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
=> test end: None
] *** END OF TEST PSXGLOBALCON 1 ***
=> test end: None
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 05]
[260/676] p:214 f:3 u:4 e:22 I:0 B:3 t:3 L:0 i:3 W:0 | powerpc/psim: psxglobalcon02.exe
<<skipping passes>>
[274/676] p:228 f:3 u:4 e:22 I:0 B:3 t:3 L:0 i:3 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:06.916627 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
[275/676] p:229 f:3 u:4 e:22 I:0 B:3 t:4 L:0 i:3 W:0 | powerpc/psim: psxkey09.exe
Result: timeout
Time: 0:03:09.156155 psxkey09.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 9
] *** BEGIN OF TEST PSXKEY 9 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - pthread key create with destructor - OK
] Init - thread create - OK
] Init - sleep - let thread run - OK
] Test_Thread - key pthread_setspecific - OK
] Test_Thread - pthread_exit to run key destructors - OK
] Init - verify destructor run - OK
=> Quit
=> bt
=> You can't do that when your target is `sim'
=> test end: PSXKEY 9
] *** TIMEOUT TIMEOUT
[276/676] p:229 f:3 u:4 e:22 I:0 B:3 t:4 L:0 i:3 W:0 | powerpc/psim: psxkey10.exe
<<skipping passes>>
[314/676] p:266 f:4 u:4 e:22 I:0 B:3 t:4 L:0 i:3 W:0 | powerpc/psim: psxtimer_face01.exe
Result: invalid
Time: 0:00:00.756148 psxtimer_face01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs m3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] timer_create - CLOCK_REALTIME forbidden - EPERM
] timer_create - CLOCK_PROCESS_CPUTIME_ID not allowed - EINVAL
] timer_create - OK
] timer_delete - OK
] timer_create - CLOCK_MONOTONIC is allowed - OK
=> test end: None
] *** END OF TEST PSXTIMER FACE 1 ***
=> test end: None
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 05]
[315/676] p:266 f:4 u:4 e:22 I:0 B:3 t:4 L:0 i:4 W:0 | powerpc/psim: psxtimes01.exe
<<skipping passes>>
[410/676] p:355 f:5 u:6 e:22 I:0 B:3 t:7 L:0 i:4 W:0 | powerpc/psim: sp21.exe
Result: timeout
Time: 0:03:10.527730 sp21.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp21.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp21.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 21
] *** BEGIN OF TEST SP 21 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] ----- TESTING THE NULL DRIVER CHECKS -----
] rtems_io_initialize - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_open - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_close - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_read - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_write - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_control - NULL DRIVER RTEMS_SUCCESSFUL
] ----- TESTING THE I/O MANAGER DIRECTIVES -----
] rtems_io_initialize - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_open - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_close - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_read - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_write - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_control - STUB DRIVER RTEMS_SUCCESSFUL
] ----- RETURNING INVALID MAJOR NUMBER -----
] rtems_io_initialize - RTEMS_INVALID_NUMBER
] rtems_io_open - RTEMS_INVALID_NUMBER
] ----- EXERCISE DRIVER REGISTER -----
] rtems_io_register_driver - RTEMS_INVALID_ADDRESS - NULL registered
] rtems_io_register_driver - RTEMS_INVALID_ADDRESS - NULL device
=> test end: SP 21
] *** TIMEOUT TIMEOUT
[411/676] p:356 f:5 u:6 e:22 I:0 B:3 t:7 L:0 i:4 W:0 | powerpc/psim: sp22.exe
<<skipping passes>>
[438/676] p:382 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: sp51.exe
Result: timeout
Time: 0:03:06.790130 sp51.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp51.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp51.exe...
=> test end: None
] *** TIMEOUT TIMEOUT
[439/676] p:383 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: sp52.exe
<<skipping passes>>
[441/676] p:385 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: sp54.exe
Result: timeout
Time: 0:03:11.016854 sp54.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp54.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp54.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp54.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp54.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp54.exe
] * BEGIN OF TEST SP 54 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] penPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
=> test end: None
] *** TIMEOUT TIMEOUT
[442/676] p:386 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: sp55.exe
<<skipping passes>>
[464/676] p:408 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: spassoc01.exe
Result: timeout
Time: 0:03:10.816847 spassoc01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPASSOC 1
] *** BEGIN OF TEST SPASSOC 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - get local by name -- OK
] Init - get local by name -- expect 0
] Init - get local by remote bitfield -- OK
] Init - get local by remote bitfield -- expect 0
] Init - get local by remote -- OK
] Init - get local by remote -- expect 0
] Init - get name by local bitfield -- OK
] Init - get name by local bitfield -- OK
] Init - get name by local bitfield -- expect""
] Init - get name by local -- OK
] Init - get name by local -- using bad value
] <assocnamebad.c: : BAD NAME>
] Init - get name by remote bitfield -- OK
] Init - get name by remote bitfield -- OK
] Init - get name by remote bitfield -- expect""
] Init - get name by remote -- OK
] Init - get name by remote -- using bad value
] <assocnamebad.c: : BAD NAME>
] Init - get ptr by local -- OK
] Init - get ptr by local -- expect NULL
] Init - get ptr by remote -- OK
] Init - get ptr by remote -- expect NULL
] Init - get ptr by name -- OK
] Init - get ptr by name -- expect NULL
] Init - get remote by local bitfield -- OK
] Init - get remote by local bitfield -- expect 0
] Init - get remote by local -- OK
] @"e"&"Quit\n"
=> bt
=> test end: SPASSOC 1
] *** TIMEOUT TIMEOUT
[465/676] p:409 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: spatomic01.exe
[466/676] p:410 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: spcache01.exe
Result: timeout
Time: 0:03:11.084993 spcache01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spcache01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spcache01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcache01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcache01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcache01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPCACHE 1
] *** BEGIN OF TEST SPCACHE 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] data cache flush and invalidate test
] data cache operations by line passed the test (write-through cache detected)
] data cache line size 32 bytes
] data cache size 0 bytes
] load 4096 bytes with flush entire data
] duration with normal cache 1092 ns
] duration with warm cache 1092 ns
] duration with flushed cache 1092 ns
] load 4096 bytes with flush multiple data
] duration with normal cache 1092 ns
] duration with warm cache 1092 ns
] duration with flushed cache 1092 ns
] load 4096 bytes with invalidate multiple data
] duration with normal cache 1092 ns
] duration with warm cache 1092 ns
] duration with invalidated cache 1092 ns
] store 4096 bytes with flush entire data
] duration with normal cache 1093 ns
] duration with warm cache 1093 ns
] duration with flushed cache 1093 ns
] store 4096 bytes with flush multiple data
] duration with normal cache 1093 ns
] duration with warm cache 1093 ns
] duration with flushed cache 1093 ns
] store 4096 bytes with invalidate multiple data
] duration with normal cache 1093 ns
=> test end: SPCACHE 1
] *** TIMEOUT TIMEOUT
[467/676] p:411 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: spcbssched01.exe
<<skipping passes>>
[477/676] p:421 f:5 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: spcontext01.exe
Result: failed
Time: 0:00:10.167108 spcontext01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPCONTEXT 1
] *** BEGIN OF TEST SPCONTEXT 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Test configuration N N N... done
] Test configuration N N F... done
] Test configuration N F N... dodone
] Test configuration F N N... don
] Test configuration F N F... done
] done
] Test configuration F F F... done
] ST SPCONTEXT 1 ***
=> test end: SPCONTEXT 1
] [ RTEMS shutdown ]
[478/676] p:421 f:6 u:6 e:22 I:0 B:3 t:8 L:0 i:4 W:0 | powerpc/psim: spcpucounter01.exe
<<skipping passes>>
[534/676] p:473 f:7 u:6 e:22 I:0 B:3 t:11 L:0 i:4 W:0 | powerpc/psim: spintrcritical14.exe
Result: timeout
Time: 0:03:03.687794 spintrcritical14.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 14
] *** BEGIN OF TEST SPINTRCRITICAL 14 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] A:SPINTRCRITICAL 14
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] S:Version:6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] S:BSP:psim
] S:BuildLabel:DEFAULT
] @"A"&"Quit\n"
=> No stack.
=> disconnect
=> quit
=> test end: SPINTRCRITICAL 14
] *** TIMEOUT TIMEOUT
[535/676] p:474 f:7 u:6 e:22 I:0 B:3 t:11 L:0 i:4 W:0 | powerpc/psim: spintrcritical15.exe
<<skipping passes>>
[537/676] p:476 f:7 u:6 e:22 I:0 B:3 t:11 L:0 i:4 W:0 | powerpc/psim: spintrcritical18.exe
Result: failed
Time: 0:00:05.823617 spintrcritical18.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 18
] *** BEGIN OF TEST SPINTRCRITICAL 18 ***
] n"
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df8
=> test end: SPINTRCRITICAL 18
] [ RTEMS shutdown ]
[538/676] p:478 f:7 u:6 e:22 I:0 B:3 t:11 L:0 i:4 W:0 | powerpc/psim: spintrcritical20.exe
<<skipping passes>>
[560/676] p:498 f:8 u:6 e:22 I:0 B:3 t:11 L:0 i:4 W:0 | powerpc/psim: spprivenv01.exe
Result: timeout
Time: 0:03:08.395554 spprivenv01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPPRIVENV 1
] *** BEGIN OF TEST SPPRIVENV 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - allocating most of heap -- OK
] Init - attempt to reset env - expect RTEMS_NO_MEMORY
] Init - freeing the allocated memory
] Init - allocating most of workspace memory
] Init - attempt to reset env - expect RTEMS_SUCCESSFUL
=> test end: SPPRIVENV 1
] *** TIMEOUT TIMEOUT
[561/676] p:499 f:8 u:6 e:22 I:0 B:3 t:12 L:0 i:4 W:0 | powerpc/psim: spprofiling01.exe
<<skipping passes>>
[599/676] p:535 f:8 u:6 e:22 I:0 B:3 t:13 L:0 i:4 W:0 | powerpc/psim: sptimer_err01.exe
Result: timeout
Time: 0:03:11.965586 sptimer_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPTIMER_ERR 1
] *** BEGIN OF TEST SPTIMER_ERR 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] TA1 - rtems_timer_fire_when - RTEMS_NOT_DEFINED
] TA1 - rtems_timer_create - RTEMS_INVALID_ADDRESS
] TA1 - rtems_timer_create - RTEMS_INVALID_NAME
] TA1 - rtems_timer_create - 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_timer_create - 2 - RTEMS_TOO_MANY
] TA1 - rtems_timer_delete - local RTEMS_INVALID_ID
] TA1 - rtems_timer_delete - global RTEMS_INVALID_ID
] TA1 - rtems_timer_ident - RTEMS_INVALID_NAME
] TA1 - rtems_timer_cancel - RTEMS_INVALID_ID
] TA1 - rtems_timer_reset - RTEMS_INVALID_ID
] TA1 - rtems_timer_reset - RTEMS_NOT_DEFINED
] TA1 - rtems_timer_fire_after - RTEMS_INVALID_ID
] TA1 - rtems_timer_fire_when - RTEMS_INVALID_ID
] TA1 - rtems_timer_fire_after - RTEMS_INVALID_ADDRESS
] TA1 - rtems_timer_fire_after - RTEMS_INVALID_NUMBER
] TA1 - rtems_timer_fire_when - RTEMS_INVALID_ADDRESS
] TA1 - rtems_timer_fire_when - 08:30:45 02/05/1987 - RTEMS_INVALID_CLOCK
] TA1 - rtems_clock_get_tod - 09:00:00 12/31/1992
] TA1 - rtems_timer_fire_when - 08:30:45 02/05/1990 - before RTEMS_INVALID_CLOCK
] TA1 - rtems_timer_get_information - RTEMS_INVALID_ADDRESS
=> test end: SPTIMER_ERR 1
] *** TIMEOUT TIMEOUT
[600/676] p:537 f:8 u:6 e:22 I:0 B:3 t:13 L:0 i:4 W:0 | powerpc/psim: sptimer_err02.exe
<<skipping passes>>
[619/676] p:555 f:8 u:6 e:22 I:0 B:3 t:13 L:0 i:4 W:0 | powerpc/psim: tm08.exe
Result: timeout
Time: 0:03:08.705652 tm08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TIME TEST 8
] *** BEGIN OF TEST TIME TEST 8 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] rtems_task_set_priority: obtain current priority - 87
=> test end: TIME TEST 8
] *** TIMEOUT TIMEOUT
[620/676] p:556 f:8 u:6 e:22 I:0 B:3 t:13 L:0 i:4 W:0 | powerpc/psim: tm09.exe
<<skipping passes>>
[651/676] p:587 f:8 u:6 e:22 I:0 B:3 t:14 L:0 i:4 W:0 | powerpc/psim: tmonetoone.exe
Result: failed
Time: 0:00:02.269912 tmonetoone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TMONETOONE
] *** BEGIN OF TEST TMONETOONE ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] yield
] a 12440
] b 12440
] event
] a 7318
] b 7318
] self-contained binary semaphore
] a 6523
] b 6522
] Classic binary semaphore (FIFO)
] a 6252
] b 6252
] Classic binary semaphore (priority)
] ad94574554dde2173402aa4f3df87a33f0
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[652/676] p:587 f:8 u:6 e:22 I:0 B:3 t:14 L:0 i:4 W:0 | powerpc/psim: tmtimer01.exe
<<skipping passes>>
[660/676] p:593 f:10 u:6 e:22 I:0 B:3 t:14 L:0 i:4 W:0 | powerpc/psim: ts-terminate.exe
Result: timeout
Time: 0:03:08.017511 ts-terminate.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TestsuitesTerminate
] *** BEGIN OF TEST TestsuitesTerminate ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] A:TestsuitesTerminate
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] S:Version:6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] S:BSP:psim
] S:BuildLabel:DEFAULT
=> test end: TestsuitesTerminate
] *** TIMEOUT TIMEOUT
[661/676] p:594 f:10 u:6 e:22 I:0 B:3 t:14 L:0 i:4 W:0 | powerpc/psim: ts-userext.exe
Result: timeout
Time: 0:03:05.620890 ts-userext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/validation/ts-userext.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TestsuitesUserext
] *** BEGIN OF TEST TestsuitesUserext ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] A:TestsuitesUserext
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] S:Version:6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] S:BSP:psim
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:FxbUPMFAfdnPCU2b0Y4l-hl4WMdj1U-2DWddZSVVsUA=
] S:RTEMS_DEBUG:0
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:RtemsUserextValUserext
=> Program
=> received signal SIGINT, Interrupt.
=> 0x0000654c in _Timecounter_Tick () at ../../../cpukit/score/src/kern_tc.c:2343
=> 2343 }
=> bt
=> #0 0x0000654c in _Timecounter_Tick () at ../../../cpukit/score/src/kern_tc.c:2343
=> #1 0x00007a70 in rtems_timecounter_tick () at ../../../cpukit/include/rtems/timecounter.h:101
=> #2 clockHandler () at ../../../bsps/powerpc/shared/clock/clock-ppc-dec.c:118
=> #3 0x00007c58 in clockIsr (unused=<optimized out>) at ../../../bsps/powerpc/shared/clock/clock-ppc-dec.c:164
=> #4 0x000099a4 in bsp_irq_dispatch_list_base (sentinel=0x0 <BSP_disable_irq_at_pic>, irq=15, tbl=<optimized out>) at ../../../bsps/powerpc/include/bsp/irq_supp.h:89
=> #5 bsp_irq_dispatch_list (sentinel=0x0 <BSP_disable_irq_at_pic>, irq=15, tbl=<optimized out>) at ../../../bsps/powerpc/include/bsp/irq_supp.h:119
=> #6 C_dispatch_irq_handler (frame=<optimized out>, excNum=<optimized out>) at ../../../bsps/powerpc/shared/irq/openpic_i8259_irq.c:244
=> #7 0x0000bc34 in wrap_change_msr_done_std () at ../../../bsps/powerpc/shared/exceptions/ppc_exc.S:129
=> disconnect
=> You can't do that when your target is `sim'
=> Quit
=> quit
=> test end: TestsuitesUserext
] *** TIMEOUT TIMEOUT
[662/676] p:595 f:10 u:6 e:22 I:0 B:3 t:14 L:0 i:4 W:0 | powerpc/psim: ts-validation-0.exe
<<skipping passes>>
[676/676] p:607 f:10 u:6 e:23 I:0 B:3 t:15 L:0 i:4 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 611
Failed: 10
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 19
Test too long: 0
Invalid: 4
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
spcontext01.exe
spintrcritical18.exe
tmonetoone.exe
minimum.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
flashdev01.exe
mrfs_fstime.exe
psxcancel01.exe
psxchroot01.exe
psxfile02.exe
psxkey09.exe
sp21.exe
sp51.exe
sp54.exe
spassoc01.exe
spcache01.exe
spintrcritical14.exe
spprivenv01.exe
sptimer_err01.exe
stackchk02.exe
termios08.exe
tm08.exe
ts-terminate.exe
ts-userext.exe
Invalid:
block07.exe
psxglobalcon01.exe
psxtimer_face01.exe
termios10.exe
Average test time: 0:00:02.041627
Testing time : 0:23:00.140113
More information about the build
mailing list