[rtems-test] powerpc/psim: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:616 Failed:11 Timeout:17 Test-Too-long:0 Invalid:0 Wrong:0
OAR Tester for CentOS 7
rtems-tester at oarcorp.com
Mon Sep 23 17:45:51 UTC 2024
Testing time : 0:20:41.061624
Average test time: 0:00:01.835889
Host
====
Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
Summary
=======
Passed: 616
Failed: 11
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 17
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
dl06.exe
fsimfsgeneric01.exe
jffs2nand_fspatheval.exe
psx12.exe
psxkey08.exe
psxtimer02.exe
sp11.exe
minimum.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
jffs2_fsrmdirparent.exe
mimfs_fserror.exe
mimfs_fsrmdirparent.exe
mrfs_fsrdwr.exe
mrfs_fsscandir01.exe
psxclock01.exe
psxgetrusage01.exe
psxintrcritical01.exe
psxkey05.exe
psxmsgq01.exe
sp29.exe
sp48.exe
spchain.exe
spfifo02.exe
spfifo04.exe
spintrcritical16.exe
spintrcritical23.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
Python: 2.7.5 (default, Nov 14 2023, 16:14:06) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
[ 1/676] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/676] p:4 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:11.833096 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
[ 16/676] p:6 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[ 42/676] p:27 f:1 u:0 e:3 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2_fsrmdirparent.exe
Result: timeout
Time: 0:03:08.437616 jffs2_fsrmdirparent.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrmdirparent.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrmdirparent.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrmdirparent.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrmdirparent.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrmdirparent.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSRMDIRPARENT JFFS2
] *** BEGIN OF TEST FSRMDIRPARENT JFFS2 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Initializing filesystem JFFS2
] Testing rmdir with arguments: ".." EXPECT "-1"
] PASS
] Testing errno for ENOTEMPTY or EBUSY
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp/.."" EXPECT "ENOTEMPTY"
] PASS
] @"&"Quit\n"
=> test end: FSRMDIRPARENT JFFS2
] *** TIMEOUT TIMEOUT
[ 43/676] p:28 f:1 u:0 e:3 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2_fsscandir01.exe
<<skipping passes>>
[ 48/676] p:31 f:1 u:0 e:5 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2nand_fspatheval.exe
Result: failed
Time: 0:00:04.785193 jffs2nand_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fspatheval.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fspatheval.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fspatheval.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fspatheval.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fspatheval.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSPATHEVAL JFFS2
] *** BEGIN OF TEST FSPATHEVAL JFFS2 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Initializing filesystem JFFS2
] Making directory /test1/
] Making directory tets2
] Making directory ///test3
] Making directory test4////
] Making directory ../../test5
] Making directory /test1/../test6
] Making directory ./test7/
] Making directory .././test8
] Making directory test8/./../test9
] Making directory ///test9/../test10
] Making directory !#$%&()-@^_`{}~'
] Making directory 0_1_A
] Making directory aaa bbb
] Making directory ccc....ddd
] Making directory fff
] Removing directory test10
] Removing directory test9
] Removing directory test8
] Removing directory test7
] Removing directory test6
] Removing directory test5
] Removing directory test4
] Removing directory test3
] Removing directory tets2
] Removing directory test1
] Removing directory fff
] Removing directory ccc....ddd
] Removing directory aaa bbb
] Removing directory 0_1_A
] Removing directory !#$%&()-@^_`{}~'
] Create file /test1
] Create file tets2
] Create file ///test3
] Create file test4
] Create file ../../test5
] Create file /../test6
] Create file ./test7
] Create file
] executing thread ID: 0x0a010002
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[ 49/676] p:32 f:1 u:0 e:5 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2nand_fspermission.exe
<<skipping passes>>
[ 71/676] p:47 f:2 u:0 e:11 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mimfs_fserror.exe
Result: timeout
Time: 0:03:12.800046 mimfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSERROR MOUNTED IMFS
] *** BEGIN OF TEST FSERROR MOUNTED IMFS ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Initializing filesystem MOUNTED IMFS
] Testing open with arguments: "name01, O_CREAT | O_EXCL" EXPECT "EEXIST"
] PASS
] Testing mkdir with arguments: "name01, mode" EXPECT "EEXIST"
] PASS
] Testing open with arguments: "name02, O_WRONLY" EXPECT "EISDIR"
] PASS
] Testing open with arguments: "name02, O_RDWR" EXPECT "EISDIR"
] PASS
] Testing open with arguments: "name, O_WRONLY" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing open with arguments: """, O_WRONLY" EXPECT "ENOENT"
] PASS
] Testing open with arguments: "name03, O_WRONLY" EXPECT "ENOENT"
] PASS
] Testing mkdir with arguments: "name, mode" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing mkdir with arguments: """, mode" EXPECT "ENOENT"
] PASS
] Testing open with arguments: "name, O_WRONLY" EXPECT "ENOTDIR"
] PASS
] Testing mkdir with arguments: "name, mode" EXPECT "ENOTDIR"
] PASS
] Testing close with arguments: "-1" EXPECT "EBADF"
] PASS
] "
] Testing close with arguments: "100" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp/file"" EXPECT "ENOTDIR"
] PASS
] @"\\"
] @"\\"
] Testing unlink with arguments: ""tmp/file/dir"" EXPECT "ENOTDIR"
] PASS
] Testing read with arguments: "fd, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing read with arguments: "100, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing write with arguments: "fd, databuf, 10" EXPECT "EBADF"
] PASS
] Testing write with arguments: "fd, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing lseek with arguments: "fd, -100, SEEK_END" EXPECT "EINVAL"
] PASS
] Testing lseek with arguments: "fd, -100, SEEK_CUR" EXPECT "EINVAL"
] PASS
] Testing lseek with arguments: "fd, -100, SEEK_SET" EXPECT "EINVAL"
] PASS
=> test end: FSERROR MOUNTED IMFS
] *** TIMEOUT TIMEOUT
[ 72/676] p:47 f:2 u:0 e:12 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mimfs_fslink.exe
<<skipping passes>>
[ 81/676] p:55 f:2 u:0 e:13 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mimfs_fsrmdirparent.exe
Result: timeout
Time: 0:03:07.575917 mimfs_fsrmdirparent.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrmdirparent.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrmdirparent.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrmdirparent.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrmdirparent.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> Connected to the simulator.
=> Quit
=> test end: None
] *** TIMEOUT TIMEOUT
[ 82/676] p:56 f:2 u:0 e:13 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mimfs_fsscandir01.exe
<<skipping passes>>
[ 90/676] p:61 f:2 u:0 e:16 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mrfs_fsrdwr.exe
Result: timeout
Time: 0:03:11.057344 mrfs_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSRDWR RFS
] *** BEGIN OF TEST FSRDWR RFS ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Initializing filesystem RFS
] test case: read_write_test
] test case: lseek_test
] Create a new file
] Writing 2430 bytes to file
] Successfully wrote 2430
] Check the current position
] 2431
=> test end: FSRDWR RFS
] *** TIMEOUT TIMEOUT
[ 91/676] p:61 f:2 u:0 e:17 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mrfs_fsrename.exe
<<skipping passes>>
[ 97/676] p:65 f:2 u:0 e:19 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mrfs_fsscandir01.exe
Result: timeout
Time: 0:03:10.421740 mrfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSSCANDIR RFS
] *** BEGIN OF TEST FSSCANDIR RFS ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Initializing filesystem RFS
=> test end: FSSCANDIR RFS
] *** TIMEOUT TIMEOUT
[ 98/676] p:65 f:2 u:0 e:20 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mrfs_fssymlink.exe
<<skipping passes>>
[134/676] p:99 f:2 u:0 e:21 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:06.013127 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
[135/676] p:100 f:2 u:0 e:21 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[217/676] p:171 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:10.092409 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
[218/676] p:172 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[239/676] p:193 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxclock01.exe
Result: timeout
Time: 0:03:09.639828 psxclock01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXCLOCK01
] *** BEGIN OF TEST PSXCLOCK01 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
=> test end: PSXCLOCK01
] *** TIMEOUT TIMEOUT
[240/676] p:193 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxclockrealtime01.exe
<<skipping passes>>
[258/676] p:211 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxgetrusage01.exe
Result: timeout
Time: 0:03:11.072274 psxgetrusage01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXGETRUSAGE 1
] *** BEGIN OF TEST PSXGETRUSAGE 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] getrusage( RUSAGE_SELF, NULL ) -- EFAULT
] getrusage( RUSAGE_CHILDREN, &usage ) -- ENOSYS
] getrusage( 77, &usage ) -- EINVAL
] Consume CPU long enough to have non-zero usage
] getrusage( RUSAGE_SELF, &usage ) -- 0
=> test end: PSXGETRUSAGE 1
] *** TIMEOUT TIMEOUT
[259/676] p:212 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxglobalcon01.exe
<<skipping passes>>
[264/676] p:217 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxintrcritical01.exe
Result: timeout
Time: 0:03:10.972867 psxintrcritical01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXINTRCRITICAL 1
] *** BEGIN OF TEST PSXINTRCRITICAL 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] A:PSXINTRCRITICAL 1
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] S:Version:6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] S:BSP:psim
] S:BuildLabel:DEFAULT
] @"a"&"Quit\n"
=> test end: PSXINTRCRITICAL 1
] *** TIMEOUT TIMEOUT
[265/676] p:218 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxinttypes01.exe
<<skipping passes>>
[271/676] p:224 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxkey05.exe
Result: timeout
Time: 0:03:10.238205 psxkey05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 5
] *** BEGIN OF TEST PSXKEY 5 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - pthread key1 create - OK
] Init - pthread key2 create - OK
] Init - key1 pthread_setspecific - OK
] Init - key2 pthread_setspecific - OK
] Init - key1 pthread_getspecific - OK
] Init - key2 pthread_getspecific - OK
=> test end: PSXKEY 5
] *** TIMEOUT TIMEOUT
[272/676] p:225 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxkey06.exe
<<skipping passes>>
[274/676] p:227 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:12.363350 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
[275/676] p:228 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[279/676] p:231 f:6 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxmsgq01.exe
Result: timeout
Time: 0:03:19.173724 psxmsgq01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXMSGQ 1
] *** BEGIN OF TEST PSXMSGQ 1 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] _______________mq_open errors
] Init: mq_open - Create with maxmsg (-1) (EINVAL)
] Init: mq_open - Create with msgsize (-1) (EINVAL)
] Init: mq_open - Open new mq without create flag (ENOENT)
] Init: mq_open - Open with too long of a name (ENAMETOOLONG)
] Init: mq_open - Create an Existing mq (EEXIST)
] Init: mq_open - SUCCESSFUL
] Init: mq_open - system is out of resources (ENFILE)
] Init: mq_close and mq_unlink (mq3...mqn) - SUCCESSFUL
] Init: Open Test Queues
] _______________verify_blocking_mq_timedsend
] _______________mq_unlink errors
] Init: mq_unlink - mq_unlink with too long of a name (ENAMETOOLONG)
] Init: mq_unlink - A Queue not opened (ENOENT)
] Init: mq_unlink (NULL) - EINVAL
] Init: mq_unlink ("") - ENOENT
] _______________mq_close errors
] Init: mq_close - unopened queue (EBADF)
] _______________mq_unlink functionality
] Init: Unlink and Open without closing SUCCESSFUL
] Task1:mq_setattr - unopened queue (EBADF)
] Task1:mq_setattr - NULL attributes (EINVAL)
] Init: set_attr all queues to blocking
] Init: Init: mq_timedreceive - on queue Qnoblock : mq_timedsend - on queue Qdefault Init: 0 sec 40 us
] _______________mq_receive errors
] Init: mq_receive - Unopened message queue (EBADF)
] Init: mq_receive - Write only queue (EBADF)
] Init: mq_receive - Size is less than the message (EMSGSIZE)
] Init: Verify Queues are full
] Init: Empty all Queues
] Init: mq_receive - Queue is empty (EAGAIN)
] _______________mq_timedreceive
] Init: Init: mq_timedreceive - on queue Qnoblock Init: 0 sec 28 us
] Init: Init: mq_timedreceive - on queue Qblock Init: 1 sec 1630 us
] Init: Init: mq_timedreceive - on queue Qdefault Init: 1 sec 6872 us
] _______________mq_open functionality
] Init: mq_open - Open an existing mq ( same id )
] _______________mq_notify
] Init: mq_notify - Unopened message queue (EBADF)
] _____mq_notify - notify when Qnoblock gets a message
] waiting on any signal for 3 seconds.
] Init: Verify Signal when send
] Init: mq_send - to Qnoblock msg: 12345678 priority 31
] waiting on any signal for 3 seconds.
] Init: Verify No Signal when send
] Init: mq_send - to Qnoblock msg: 12345678 priority 31
] waiting on any signal for 3 seconds.
] ____mq_notify - notify when Qread gets a message
] waiting on any signal for 3 seconds.
] Init: mq_notify - (EBUSY)
] Init: mq_notify - Remove notification with null
] Init: Verify No Signal when send
] Init: mq_send - to Qnoblock msg: 12345678 priority 31
] waiting on any signal for 3 seconds.
] _______________multi-thread Task 1 Test
] Task_1: Fri Jan 1 00:00:19 1988
] Task_1: mq_send - to Qblock msg: 12345678 priority 31
] Task_1: pthread_exit
] Init: Fri Jan 1 00:00:19 1988
] _______________multi-thread Task 2 Test
] Init: Verify Queues are empty
] Init: Fill Queues with messages
] Init: Verify Queues are full
] Init: mq_send - to Qblock msg: Last priority 32
] Task_2: Fri Jan 1 00:00:19 1988
] Task_2: Verify Queues are full
] Task_2: pthread_exit
] Init: Fri Jan 1 00:00:19 1988
] Init: Verify Queues are full
] Init: Empty all Queues
] _______________multi-thread Task 3 Test
] Init: Verify Queues are empty
] Init: Fill Queues with messages
] Init: Verify Queues are full
] Init: mq_send - Block while thread deletes queue (EBADF)
] Task_3: Fri Jan 1 00:00:19 1988
] _______________Unlink and Close All Files
] Task_3: pthread_exit
] _______________mq_timedout_receive
] Init: Init: verify_timedout_mq_timedreceive - on queue Qnoblock Init: 0 sec 24 us
] _______________verify_timedout_mq_timedsend
=> test end: PSXMSGQ 1
] *** TIMEOUT TIMEOUT
[280/676] p:232 f:6 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxmsgq02.exe
<<skipping passes>>
[313/676] p:264 f:6 u:4 e:22 I:0 B:3 t:6 L:0 i:0 W:0 | powerpc/psim: psxtimer02.exe
Result: failed
Time: 0:00:01.064671 psxtimer02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXTIMER 2
] *** BEGIN OF TEST PSXTIMER 2 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] timer_create - bad clock id - EINVAL
] timer_create - bad timer id pointer - EINVAL
] timer_create - OK
] timer_create - too many - EAGAIN
] timer_delete - bad id - EINVAL
] timer_getoverrun - bad id - EINVAL
] @"\"
] timer_gettime - bad itimer - EINVAL
] 5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 05]
[314/676] p:264 f:7 u:4 e:22 I:0 B:3 t:6 L:0 i:0 W:0 | powerpc/psim: psxtimer_face01.exe
<<skipping passes>>
[399/676] p:343 f:8 u:6 e:22 I:0 B:3 t:9 L:0 i:0 W:0 | powerpc/psim: sp11.exe
Result: failed
Time: 0:00:10.700214 sp11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp11.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp11.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 11
] *** BEGIN OF TEST SP 11 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] TA1 - rtems_event_send - send RTEMS_EVENT_16 to TA2
] TA1 - rtems_event_receive - waiting forever on RTEMS_EVENT_14 and RTEMS_EVENT_15
] TA2 - rtems_event_receive - waiting forever on RTEMS_EVENT_16
] TA2 - RTEMS_EVENT_16 received - eventout => 00010000
] TA2 - rtems_event_send - send RTEMS_EVENT_14 and RTEMS_EVENT_15 to TA1
] TA2 - rtems_event_receive - RTEMS_EVENT_17 or RTEMS_EVENT_18 - forever and ANY
] TA1 - RTEMS_EVENT_14 and RTEMS_EVENT_15 received - eventout => 0000c000
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to TA2
] TA1 - rtems_event_receive - waiting with 10 second timeout on RTEMS_EVENT_14
] TA2 - RTEMS_EVENT_17 or RTEMS_EVENT_18 received - eventout => 00040000
] TA2 - rtems_event_send - send RTEMS_EVENT_14 to TA1
] TA2 - rtems_clock_set - 08:15:00 02/12/1988
] TA2 - rtems_event_send - sending RTEMS_EVENT_10 to self after 4 seconds
] TA2 - rtems_event_receive - waiting forever on RTEMS_EVENT_10
] TA1 - RTEMS_EVENT_14 received - eventout => 00004000
] TA1 - rtems_event_send - send RTEMS_EVENT_19 to TA2
] TA1 - rtems_clock_get_tod - 08:15:00 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to self after 5 seconds
] TA1 - rtems_event_receive - waiting forever on RTEMS_EVENT_18
] TA2 - RTEMS_EVENT_10 received - eventout => 00000400
] TA2 - rtems_clock_get_tod - 08:15:04 02/12/1988
] TA2 - rtems_event_receive - RTEMS_PENDING_EVENTS
] TA2 - eventout => 00080000
] TA2 - rtems_event_receive - RTEMS_EVENT_19 - RTEMS_NO_WAIT
] TA2 - RTEMS_EVENT_19 received - eventout => 00080000
] TA2 - rtems_task_delete - deletes self
] TA1 - RTEMS_EVENT_18 received - eventout => 00040000
] TA1 - rtems_clock_get_tod - 08:15:04 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_3 to self
] TA1 - rtems_event_receive - RTEMS_EVENT_3 or RTEMS_EVENT_22 - NO_WAIT and ANY
] TA1 - RTEMS_EVENT_3 received - eventout => 00000008
] TA1 - rtems_event_send - send RTEMS_EVENT_4 to self
] TA1 - rtems_event_receive - RTEMS_EVENT_4 or RTEMS_EVENT_5 - forever and ANY
] TA1 - RTEMS_EVENT_4 received - eventout => 00000010
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to self after 5 seconds
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_18
] TA1 - rtems_event_send - send RTEMS_EVENT_8 to self after 60 seconds
] TA1 - rtems_event_send - send RTEMS_EVENT_9 to self after 60 seconds
] TA1 - rtems_event_send - send RTEMS_EVENT_10 to self after 60 seconds
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_8
] TA1 - rtems_clock_set - 08:15:00 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_1 every second
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:00 02/12/1988
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:01 02/12/1988
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:02 02/12/1988
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_1
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_timer_cancel - cancelling RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_timer_cancel - cancelling RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_event_send - resending RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_clock_set - 08:15:02 02/15/1988
] TA1 - rtems_event_receive - waiting forever on RTEMS_EVENT_11
] TA1 - RTEMS_EVENT_11 received - eventout => 00000800
] TA1 - rtems_event_send/rtems_event_receive combination
] @"t
] TA1 - rtems_clock_seRTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] executing thread ID: 0x0a010002
] executing thread name: TA1
=> [Inferior 1 (process 42000) exited with code 05]
[400/676] p:344 f:8 u:6 e:22 I:0 B:3 t:9 L:0 i:0 W:0 | powerpc/psim: sp12.exe
<<skipping passes>>
[418/676] p:360 f:9 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: sp29.exe
Result: timeout
Time: 0:03:05.662829 sp29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp29.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp29.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp29.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp29.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> test end: None
] *** TIMEOUT TIMEOUT
[419/676] p:361 f:9 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: sp30.exe
<<skipping passes>>
[435/676] p:377 f:9 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: sp48.exe
Result: timeout
Time: 0:03:08.269085 sp48.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp48.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp48.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp48.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp48.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp48.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 48
] *** BEGIN OF TEST SP 48 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Largest C program heap block available: 33061176
=> test end: SP 48
] *** TIMEOUT TIMEOUT
[436/676] p:378 f:9 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: sp49.exe
<<skipping passes>>
[470/676] p:412 f:9 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spchain.exe
Result: timeout
Time: 0:03:08.736956 spchain.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spchain.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spchain.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spchain.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spchain.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spchain.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPCHAIN
] *** BEGIN OF TEST SPCHAIN ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - Initialize chain empty
] INIT - Verify rtems_chain_insert
] INIT - Verify _Chain_Initialize_one
] INIT - Verify rtems_chain_is_first
] INIT - Verify rtems_chain_is_last
] INIT - Verify rtems_chain_append_with_empty_check
] INIT - Verify rtems_chain_prepend_with_empty_check
] INIT - Verify rtems_chain_get_with_empty_check
] INIT - Verify rtems_chain_append_with_notification
] INIT - Verify rtems_chain_prepend_with_notification
] INIT - Verify rtems_chain_get_with_notification
] INIT - Verify rtems_chain_get_with_wait
] INIT - Verify rtems_chain_control layout
] INIT - Verify rtems_chain_control initializer
=> test end: SPCHAIN
] *** TIMEOUT TIMEOUT
[471/676] p:413 f:9 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spclock_err01.exe
<<skipping passes>>
[512/676] p:452 f:10 u:6 e:22 I:0 B:3 t:11 L:0 i:0 W:0 | powerpc/psim: spfifo02.exe
Result: timeout
Time: 0:03:15.840752 spfifo02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPFIFO 2
] *** BEGIN OF TEST SPFIFO 2 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Creating FIFO
] pening FIFO.. expect ENOMEM since no memory is available
] expect status=-1 errno=12/(Not enough space)
] ening FIFO in RDWR mode. Expect OK
] perrno=12/(Not enough space)
] Opening FIFO in non blocking RDONLY mode. Expect OK
] expect status=3 errno=12/(Not enough space)
] Opening FIFO in non blocking WRONLY mode. Expect ENXIO
] expect status=-1 errno=6/(No such device or address)
] Multiple opens
] 1... expect status=3 errno=6/(No such device or address)
] 2... expect status=4 errno=6/(No such device or address)
] 3... expect status=3 errno=6/(No such device or address)
] 4... expect status=4 errno=6/(No such device or address)
] 5... expect status=3 errno=6/(No such device or address)
] 6... expect status=4 errno=6/(No such device or address)
] 7... expect status=3 errno=6/(No such device or address)
] 8... expect status=4 errno=6/(No such device or address)
] 9... expect status=3 errno=6/(No such device or address)
] 10... expect status=4 errno=6/(No such device or address)
=> test end: SPFIFO 2
] *** TIMEOUT TIMEOUT
[513/676] p:453 f:10 u:6 e:22 I:0 B:3 t:11 L:0 i:0 W:0 | powerpc/psim: spfifo03.exe
[514/676] p:454 f:10 u:6 e:22 I:0 B:3 t:11 L:0 i:0 W:0 | powerpc/psim: spfifo04.exe
Result: timeout
Time: 0:03:09.295524 spfifo04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPFIFO 4
] *** BEGIN OF TEST SPFIFO 4 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] Init - Creating /fifo
] Init - Opening /fifo in readonly, non-blocking mode
] Init - Attempt to lseek on fifo -- Expected ESPIPE
] Init - ioctl: FIONBIO -- Expected EFAULT
] Init - ioctl: FIONBIO -- OK
] Init - ioctl: FIONBIO -- OK
=> test end: SPFIFO 4
] *** TIMEOUT TIMEOUT
[515/676] p:455 f:10 u:6 e:22 I:0 B:3 t:11 L:0 i:0 W:0 | powerpc/psim: spfifo05.exe
<<skipping passes>>
[536/676] p:475 f:10 u:6 e:22 I:0 B:3 t:12 L:0 i:0 W:0 | powerpc/psim: spintrcritical16.exe
Result: timeout
Time: 0:03:11.184237 spintrcritical16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 16
] *** BEGIN OF TEST SPINTRCRITICAL 16 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] A:SPINTRCRITICAL 16
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] S:Version:6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] S:BSP:psim
] S:BuildLabel:DEFAULT
=> test end: SPINTRCRITICAL 16
] *** TIMEOUT TIMEOUT
[537/676] p:476 f:10 u:6 e:22 I:0 B:3 t:12 L:0 i:0 W:0 | powerpc/psim: spintrcritical18.exe
<<skipping passes>>
[541/676] p:480 f:10 u:6 e:22 I:0 B:3 t:12 L:0 i:0 W:0 | powerpc/psim: spintrcritical23.exe
Result: timeout
Time: 0:03:09.730900 spintrcritical23.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 23
] *** BEGIN OF TEST SPINTRCRITICAL 23 ***
] *** TEST VERSION: 6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] A:SPINTRCRITICAL 23
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 46a5bfdc3fc95d503a63f9bee515e73d9198aa71, Newlib 1b3dcfd)
] S:Version:6.0.0.6003ea9d94574554dde2173402aa4f3df87a33f0
] S:BSP:psim
] S:BuildLabel:DEFAULT
] @"a"&"Quit\n"
=> You can't do that when your target is `sim'
=> test end: SPINTRCRITICAL 23
] *** TIMEOUT TIMEOUT
[542/676] p:481 f:10 u:6 e:22 I:0 B:3 t:12 L:0 i:0 W:0 | powerpc/psim: spintrcritical24.exe
<<skipping passes>>
[676/676] p:609 f:11 u:6 e:22 I:0 B:3 t:17 L:0 i:0 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 616
Failed: 11
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 17
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
dl06.exe
fsimfsgeneric01.exe
jffs2nand_fspatheval.exe
psx12.exe
psxkey08.exe
psxtimer02.exe
sp11.exe
minimum.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
jffs2_fsrmdirparent.exe
mimfs_fserror.exe
mimfs_fsrmdirparent.exe
mrfs_fsrdwr.exe
mrfs_fsscandir01.exe
psxclock01.exe
psxgetrusage01.exe
psxintrcritical01.exe
psxkey05.exe
psxmsgq01.exe
sp29.exe
sp48.exe
spchain.exe
spfifo02.exe
spfifo04.exe
spintrcritical16.exe
spintrcritical23.exe
Average test time: 0:00:01.835889
Testing time : 0:20:41.061624
More information about the build
mailing list