[rtems-test] powerpc/psim: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:615 Failed:7 Timeout:20 Test-Too-long:0 Invalid:1 Wrong:0
OAR Tester for CentOS 7
rtems-tester at oarcorp.com
Mon Sep 30 17:51:03 UTC 2024
Testing time : 0:21:57.542240
Average test time: 0:00:01.951914
Host
====
Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
Summary
=======
Passed: 615
Failed: 7
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 20
Test too long: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 675
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
block07.exe
block08.exe
capture01.exe
complex.exe
jffs2_fserror.exe
psxbarrier01.exe
psxcond02.exe
psxid01.exe
psxkey07.exe
psxpasswd01.exe
psxtmrwlock05.exe
sp32.exe
sp43.exe
sp44.exe
sptimespec01.exe
tm04.exe
tm19.exe
tm27.exe
tmfine01.exe
tmtimer01.exe
Invalid:
sp11.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
Python: 2.7.5 (default, Nov 14 2023, 16:14:06) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
[ 1/675] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/675] p:4 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:11.811679 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
[ 16/675] p:5 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[ 32/675] p:20 f:1 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2_fserror.exe
Result: timeout
Time: 0:03:11.695628 jffs2_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSERROR JFFS2
] *** BEGIN OF TEST FSERROR JFFS2 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] Initializing filesystem JFFS2
] Testing open with arguments: "name01, O_CREAT | O_EXCL" EXPECT "EEXIST"
] PASS
] Testing mkdir with arguments: "name01, mode" EXPECT "EEXIST"
] PASS
] Testing open with arguments: "name02, O_WRONLY" EXPECT "EISDIR"
] PASS
] Testing open with arguments: "name02, O_RDWR" EXPECT "EISDIR"
] PASS
] Testing open with arguments: "name, O_WRONLY" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing open with arguments: """, O_WRONLY" EXPECT "ENOENT"
] PASS
] Testing open with arguments: "name03, O_WRONLY" EXPECT "ENOENT"
] PASS
] Testing mkdir with arguments: "name, mode" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing mkdir with arguments: """, mode" EXPECT "ENOENT"
] PASS
] Testing open with arguments: "name, O_WRONLY" EXPECT "ENOTDIR"
] PASS
] Testing mkdir with arguments: "name, mode" EXPECT "ENOTDIR"
] PASS
] Testing close with arguments: "-1" EXPECT "EBADF"
] PASS
] Testing close with arguments: "100" EXPECT "EBADF"
] PASS
] @"\\"
] @"\\"
] Testing rename with arguments: "name01, """ EXPECT "ENOENT"
] PASS
] Testing rename with arguments: "name03, name" EXPECT "ENOTDIR"
] PASS
] Testing truncate with arguments: "file, -1" EXPECT "EINVAL"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp"" EXPECT "ENOTEMPTY"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""."" EXPECT "EINVAL"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp/."" EXPECT "EINVAL"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: """" EXPECT "ENOENT"
] PASS
] Testing rmdir with arguments: "nonexistence" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing unlink with arguments: """" EXPECT "ENOENT"
] PASS
] Testing unlink with arguments: "nonexistence" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp/file"" EXPECT "ENOTDIR"
] PASS
] @"\\"
] @"\\"
] Testing unlink with arguments: ""tmp/file/dir"" EXPECT "ENOTDIR"
] PASS
] Testing read with arguments: "fd, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing read with arguments: "100, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing write with arguments: "fd, databuf, 10" EXPECT "EBADF"
] PASS
] Testing write with arguments: "fd, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing lseek with arguments: "fd, -100, SEEK_END" EXPECT "EINVAL"
] PASS
=> test end: FSERROR JFFS2
] *** TIMEOUT TIMEOUT
[ 33/675] p:21 f:1 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2_fslink.exe
<<skipping passes>>
[107/675] p:75 f:1 u:0 e:20 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block07.exe
Result: timeout
Time: 0:03:12.088350 block07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/block07.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/block07.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block07.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block07.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block07.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: BLOCK 7
] *** BEGIN OF TEST BLOCK 7 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] I: try access: 0
] I: access: 0
] L: try access: 0
] H: try access: 0
] M: try access: 0
] I: release: 0
] I: release done: 0
] L: access: 0
] L: release: 0
] H: access: 0
] H: release: 0
] H: release done: 0
] M: access: 0
] M: release: 0
] M: release done: 0
=> test end: BLOCK 7
] *** TIMEOUT TIMEOUT
[108/675] p:75 f:1 u:0 e:21 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block08.exe
Result: timeout
Time: 0:03:15.610901 block08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/block08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/block08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: BLOCK 8
] *** BEGIN OF TEST BLOCK 8 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] TEST DISK - OK
] Test 1.1 - STARTED
] Thread #1 started
] DISK_DRV: R [0]
] Test 1.1: Step 2 - OK
] DISK_DRV: R [10]
] Test 1.1: Step 4 - OK
] DISK_DRV: R [10]
] Test 1.1: Step 6 - OK
] TEST PASSED
] Test 1.2 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [20]
] Test 1.2: Step 3 - OK
] DISK_DRV: R [20]
] Test 1.2: Step 5 - OK
] TEST PASSED
] Test 1.3 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [30]
] Test 1.3: Step 3 - OK
] DISK_DRV: R [30]
] Test 1.3: Step 5 - OK
] TEST PASSED
] Test 1.4 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [40]
] Test 1.4: Step 3 - OK
] Test 1.4: Step 5 - OK
] TEST PASSED
] Test 1.5 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [50]
] Test 1.5: Step 1 - OK
] Test 1.5: Step 4 - OK
] TEST PASSED
] Test 2.1 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [60]
] Test 2.1: Step 3 - OK
] Test 2.1: Step 5 - OK
] DISK_DRV: W [60]
] TEST PASSED
] Test 2.2 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [70]
] Test 2.2: Step 3 - OK
] Test 2.2: Step 5 - OK
] DISK_DRV: W [70]
] TEST PASSED
] Test 3.1 - STARTED
] Thread #1 started
] Thread #2 started
] Test 3.1: Step 3 - OK
] DISK_DRV: W [80]
] Test 3.1: Step 5 - OK
] DISK_DRV: W [85]
] TEST PASSED
] Test 3.2 - STARTED
] Thread #1 started
] Thread #2 started
] Thread #3 started
] DISK_DRV: R [90]
] Thread #2 DEBLOCK
] Test 3.2: Step 5 - OK
] DISK_DRV: W [92]
] Thread #3 DEBLOCK
] DISK_DRV: W [94]
] TEST PASSED
] Test 3.3 - STARTED
] Thread #1 started
] Thread #2 started
] Thread #3 started
] DISK_DRV: R [96]
] DISK_DRV: R [98]
] Thread #2 DEBLOCK
] Test 3.3: Step 5 - OK
] DISK_DRV: R [100]
] Thread #3 DEBLOCK
] TEST PASSED
] Test 4.1 - STARTED
] Thread #1 started
] Thread #2 started
] DISK_DRV: R [112]
] Test 4.1: Step 2 - OK
] DISK_DRV: W [112]
] Test 4.1: Step 5 - OK
] TEST PASSED
] Test 4.2 - STARTED
] @"r&"Quit\n"
=> bt
=> test end: BLOCK 8
] *** TIMEOUT TIMEOUT
[109/675] p:76 f:1 u:0 e:21 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block09.exe
<<skipping passes>>
[119/675] p:86 f:1 u:0 e:21 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: capture01.exe
Result: timeout
Time: 0:03:14.035057 capture01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/capture01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/capture01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/capture01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/capture01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/capture01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: CAPTURE 1
] *** BEGIN OF TEST CAPTURE 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] watch priority ceiling is 100
] watch priority floor is 102
] global watch is enabled
] total 1
] 00000000 ???? g- T:S------ F:-----
] 0 0:00:00.005245699 0a010002 CT1a 102 102 102 8192 TASK_RECORD
] 0 0:00:00.005264299 0 0a010002 CT1a 102 102 SWITCHED_OUT
] 0 0:00:01.000348399 0a010003 CT1b 101 101 101 8192 TASK_RECORD
] 0 0:00:01.000366999 995102700 0a010003 CT1b 101 101 CREATED
] 0 0:00:01.000503299 136300 0a010003 CT1b 101 101 STARTED
] 0 0:00:01.000579599 76300 0a010003 CT1b 101 101 SWITCHED_IN
] 0 0:00:01.000641799 62200 0a010003 CT1b 101 101 BEGIN
] 0 0:00:01.997754799 997113000 0a010003 CT1b 101 101 SWITCHED_OUT
] 0 0:00:01.997974599 0a010004 CT1c 100 100 100 8192 TASK_RECORD
] @"
] 0 0:00:01.997993199 238400 0a010004 CT1c 100 100 a010004 CT1c 100 100 SWITCHED_OUT
] 0 0:00:02.498054999 20800 0a010003 CT1b 101 101 SWITCHED_IN
] 0 0:00:02.997801699 499746700 0a010003 CT1b 101 101 SWITCHED_OUT
] 0 0:00:02.997894099 0 0a010004 CT1c 100 100 SWITCHED_IN
] 0 0:00:02.997976599 82500 0a010004 CT1c 100 100 TERMINATED
] 0 0:00:02.998077699 101100 0a010004 CT1c 100 100 SWITCHED_OUT
] 0 0:00:02.998098499 20800 0a010003 CT1b 101 101 SWITCHED_IN
] 0 0:00:02.998173199 74700 0a010003 CT1b 101 101 TERMINATED
] 0 0:00:02.998274299 101100 0a010003 CT1b 101 101 SWITCHED_OUT
] 0 0:00:02.998295099 20800 0a010002 CT1a 102 102 SWITCHED_IN
=> test end: CAPTURE 1
] *** TIMEOUT TIMEOUT
[120/675] p:87 f:1 u:0 e:21 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: complex.exe
Result: timeout
Time: 0:03:12.552942 complex.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/complex.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/complex.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/complex.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/complex.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/complex.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: COMPLEX
] *** BEGIN OF TEST COMPLEX ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] cabs : 1.414214
] cacos : 0.904557 -1.061275i
] cacosh : 1.061275 0.904557i
] carg : 0.785398
] casin : 0.666239 1.061275i
] casinh : 1.061275 0.666239i
] catan : 1.017222 0.402359i
] catanh : 0.402359 1.017222i
] ccos : 0.833730 -0.988898i
] ccosh : 0.833730 0.988898i
] cexp : 1.468694 2.287355i
] cimag : 1.000000
] clog : 0.346574 0.785398i
] conj : 1.000000 -1.000000i
] cpow : 2.807879 1.317865i
] cproj : 1.000000 1.000000i
] creal : 1.000000
] csin : 1.298458 0.634964i
] csinh : 0.634964 1.298458i
] csqrt : 1.098684 0.455090i
] ctan : 0.271753 1.083923i
] ctanh : 1.083923 0.271753i
] cabsf : 1.414214
] cacosf : 0.904557 -1.061275i
] cacoshf: 1.061275 0.904557i
] cargf : 0.785398
] casinf : 0.666239 1.061275i
] casinhf: 1.061275 0.666239i
] catanf : 1.017222 0.402359i
] catanhf: 0.402359 1.017222i
] ccosf : 0.833730 -0.988898i
] ccoshf : 0.833730 0.988898i
] cexpf : 1.468694 2.287355i
] cimagf : 1.000000
] clogf : 0.346574 0.785398i
] conjf : 1.000000 -1.000000i
] cpowf : 2.807879 1.317865i
] cprojf : 1.000000 1.000000i
=> test end: COMPLEX
] *** TIMEOUT TIMEOUT
[121/675] p:88 f:1 u:0 e:21 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: cpuuse.exe
<<skipping passes>>
[134/675] p:100 f:1 u:0 e:21 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:05.916229 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
[135/675] p:101 f:1 u:0 e:21 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[217/675] p:172 f:3 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:08.485411 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
[218/675] p:173 f:3 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[230/675] p:184 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxbarrier01.exe
Result: timeout
Time: 0:03:11.691553 psxbarrier01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXBARRIER 1
] *** BEGIN OF TEST PSXBARRIER 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] pthread_barrierattr_init( NULL ) -- EINVAL
] pthread_barrierattr_setpshared( NULL, private ) -- EINVAL
] pthread_barrierattr_setpshared( NULL, shared ) -- EINVAL
] pthread_barrierattr_getpshared( NULL, &p ) -- EINVAL
] pthread_barrierattr_destroy( NULL ) -- EINVAL
] pthread_barri -- EINVAL
] pthread_barrierattr_setpshared( &attr, shared ) -- OK
] pthread_barrier_init( &barrier, &attr, 1 ) -- OK
] pthread_barrier_destroy( &barrier ) -- OK
] pthread_barrierattr_destroy( &attr ) -- OK
] pthread_barrier_destroy( NULL ) -- EINVAL
] pthread_barrier_destroy( bad_barrier ) -- EINVAL
] pthread_barrier_wait( NULL ) -- EINVAL
] pthread_barrier_wait( bad_barrier ) -- EINVAL
] pthread_barrierattr_init( &attr ) -- OK
] pthread_barrier_init( &barrier, &attr, 2 ) -- OK
] pthread_barrier_destroy( &barrier ) -- OK
] pthread_barrier_init( &Barrier, &attr, NUMBER_THREADS ) -- OK
] Init: pthread_create - thread 1 OK
] pthread_barrier_wait( &Barrier ) for thread 0x0b010001
] pthread_barrier_destroy( &Barrier ) -- EBUSY
] Init: pthread_create - thread 2 OK
] pthread_barrier_wait( &Barrier ) for thread 0x0b010002
=> test end: PSXBARRIER 1
] *** TIMEOUT TIMEOUT
[231/675] p:185 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxcancel.exe
<<skipping passes>>
[243/675] p:197 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxcond02.exe
Result: timeout
Time: 0:03:10.403985 psxcond02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXCOND 2
] *** BEGIN OF TEST PSXCOND 2 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] pthread_condattr_getclock (NULL attribute) - EINVAL
] pthread_condattr_getclock (NULL clock) - EINVAL
] pthread_condattr_setclock (NULL attribute) - EINVAL
] pthread_condattr_init - OK
] pthread_condattr_setclock (bad clock)- EINVAL
=> test end: PSXCOND 2
] *** TIMEOUT TIMEOUT
[244/675] p:198 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxconfig01.exe
<<skipping passes>>
[261/675] p:215 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxid01.exe
Result: timeout
Time: 0:03:12.143984 psxid01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXID 1
] *** BEGIN OF TEST PSXID 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] getegid = 0
] getgid = 0
] setgid(5)
] getegid = 0
] getgid = 5
] setegid(5)
] getegid = 5
] getgid = 5
] setgid(0)
] setegid(0)
] setpgid(getpid(), 10) - ENOSYS
] geteuid = 0
] getuid = 0
] setuid(5)
] geteuid = 0
] getuid = 5
] seteuid(5)
] geteuid = 5
] getuid = 5
] seteuid(0)
] setuid(0)
] getpid = 1
] __getpid = 1
] getppid = 0
] setsid - EPERM
] getpgrp - return local node - OK
] getpgrp returned 1
] setuid(5)
] getlogin() -- ()
] setuid(0)
] getlogin() -- (root)
] getlogin_r(NULL, LOGIN_NAME_MAX) -- EFAULT
=> test end: PSXID 1
] *** TIMEOUT TIMEOUT
[262/675] p:216 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psximfs01.exe
<<skipping passes>>
[273/675] p:227 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxkey07.exe
Result: timeout
Time: 0:03:07.352435 psxkey07.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey07.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey07.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey07.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey07.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> test end: None
] *** TIMEOUT TIMEOUT
[274/675] p:228 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:11.881533 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] In have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
[275/675] p:229 f:4 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[287/675] p:240 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxpasswd01.exe
Result: timeout
Time: 0:03:08.396995 psxpasswd01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXPASSWD 1
] *** BEGIN OF TEST PSXPASSWD 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] Init - getpwent() -- OK, result should be NULL
] Init - getgrent() -- OK, result should be NULL
] Init - setpwent() -- OK
] Init - setgrent() -- OK
] Init - getpwent() (1) -- OK
] username: root
] user password:
] user ID: 0
] group ID: 0
] real name:
] home directory:
] shell program:
] Init - getpwent() (2) -- result should be NULL
] Init - getgrent() (1) -- OK
] group name: root
] group password:
] group ID: 0
] Init - getgrent() (2) -- result should be NULL
] Init - getpwnam("root") -- OK
] username: root
] user password:
] user ID: 0
] group ID: 0
] real name:
] home directory:
] shell program:
] Init - getpwnam("suser") -- result should be NULL
] Init - getpwuid(0) -- OK
] username: root
] user password:
] user ID: 0
] group ID: 0
] real name:
] home directory:
] shell program:
] Init - getpwuid(4) -- result should be NULL
] Init - getgrnam("root") -- OK
] group name: root
=> test end: PSXPASSWD 1
] *** TIMEOUT TIMEOUT
[288/675] p:241 f:5 u:4 e:22 I:0 B:3 t:5 L:0 i:0 W:0 | powerpc/psim: psxpasswd02.exe
<<skipping passes>>
[357/675] p:308 f:5 u:4 e:22 I:0 B:3 t:7 L:0 i:0 W:0 | powerpc/psim: psxtmrwlock05.exe
Result: timeout
Time: 0:03:05.884073 psxtmrwlock05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock05.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock05.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock05.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock05.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> test end: None
] *** TIMEOUT TIMEOUT
[358/675] p:309 f:5 u:4 e:22 I:0 B:3 t:7 L:0 i:0 W:0 | powerpc/psim: psxtmrwlock06.exe
<<skipping passes>>
[398/675] p:345 f:5 u:6 e:22 I:0 B:3 t:9 L:0 i:0 W:0 | powerpc/psim: sp11.exe
Result: invalid
Time: 0:00:06.768831 sp11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp11.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp11.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
] - rtems_event_send - send RTEMS_EVENT_14 and RTEMS_EVENT_15 to TA1
] TA2 - rtems_event_receive - RTEMS_EVENT_17 or RTEMS_EVENT_18 - forever and ANY
] TA1 - RTEMS_EVENT_14 and RTEMS_EVENT_15 received - eventout => 0000c000
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to TA2
] TA1 - rtems_event_receive - waiting with 10 second timeout on RTEMS_EVENT_14
] TA2 - RTEMS_EVENT_17 or RTEMS_EVENT_18 received - eventout => 00040000
] TA2 - rtems_event_send - send RTEMS_EVENT_14 to TA1
] TA2 - rtems_clock_set - 08:15:00 02/12/1988
] TA2 - rtems_event_send - sending RTEMS_EVENT_10 to self after 4 seconds
] TA2 - rtems_event_receive - waiting forever on RTEMS_EVENT_10
] TA1 - RTEMS_EVENT_14 received - eventout => 00004000
] TA1 - rtems_event_send - send RTEMS_EVENT_19 to TA2
] TA1 - rtems_clock_get_tod - 08:15:00 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to self after 5 seconds
] TA1 - rtems_event_receive - waiting forever on RTEMS_EVENT_18
] TA2 - RTEMS_EVENT_10 received - eventout => 00000400
] TA2 - rtems_clock_get_tod - 08:15:04 02/12/1988
] TA2 - rtems_event_receive - RTEMS_PENDING_EVENTS
] TA2 - eventout => 00080000
] TA2 - rtems_event_receive - RTEMS_EVENT_19 - RTEMS_NO_WAIT
] TA2 - RTEMS_EVENT_19 received - eventout => 00080000
] TA2 - rtems_task_delete - deletes self
] TA1 - RTEMS_EVENT_18 received - eventout => 00040000
] TA1 - rtems_clock_get_tod - 08:15:04 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_3 to self
] TA1 - rtems_event_receive - RTEMS_EVENT_3 or RTEMS_EVENT_22 - NO_WAIT and ANY
] TA1 - RTEMS_EVENT_3 received - eventout => 00000008
] TA1 - rtems_event_send - send RTEMS_EVENT_4 to self
] TA1 - rtems_event_receive - RTEMS_EVENT_4 or RTEMS_EVENT_5 - forever and ANY
] TA1 - RTEMS_EVENT_4 received - eventout => 00000010
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to self after 5 seconds
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_18
] TA1 - rtems_event_send - send RTEMS_EVENT_8 to self after 60 seconds
] TA1 - rtems_event_send - send RTEMS_EVENT_9 to self after 60 seconds
] TA1 - rtems_event_send - send RTEMS_EVENT_10 to self after 60 seconds
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_8
] TA1 - rtems_clock_set - 08:15:00 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_1 every second
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:00 02/12/1988
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:01 02/12/1988
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:02 02/12/1988
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_1
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_timer_cancel - cancelling RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_timer_cancel - cancelling RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_event_send - resending RTEMS_EVENT_11 to s00 ticks
] TA1 - rtems_event_send - send RTEMS_EVENT_4 to self
] TA1 - rtems_event_receive - RTEMS_EVENT_4 AND RTEMS_EVENT_5 - UNSATISFIED
=> test end: None
] *** END OF TEST SP 11 ***
=> test end: None
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] executing thread ID: 0x0a010002
] executing thread name: TA1
=> [Inferior 1 (process 42000) exited with code 05]
[399/675] p:346 f:5 u:6 e:22 I:0 B:3 t:9 L:0 i:0 W:0 | powerpc/psim: sp12.exe
<<skipping passes>>
[420/675] p:365 f:5 u:6 e:22 I:0 B:3 t:10 L:0 i:1 W:0 | powerpc/psim: sp32.exe
Result: timeout
Time: 0:03:07.799618 sp32.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp32.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp32.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp32.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp32.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp32.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test end: None
] *** TIMEOUT TIMEOUT
[421/675] p:367 f:5 u:6 e:22 I:0 B:3 t:10 L:0 i:1 W:0 | powerpc/psim: sp33.exe
<<skipping passes>>
[429/675] p:374 f:5 u:6 e:22 I:0 B:3 t:10 L:0 i:1 W:0 | powerpc/psim: sp43.exe
Result: timeout
Time: 0:03:21.011842 sp43.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp43.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp43.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp43.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp43.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp43.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 43
] *** BEGIN OF TEST SP 43 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] RTEMS Version: rtems-6.0.0 (PowerPC/Generic (classic FPU)/psim)
] RTEMS Copyright Notice: Copyright (C) 1989, 2021 RTEMS Project and contributors
] rtems_object_get_classic_name - INVALID_ADDRESS
] rtems_object_get_classic_name - INVALID_ID (bad index)
] rtems_object_get_classic_name - INVALID_ID (unallocated index)
] rtems_object_get_classic_name - INVALID_ID (bad API)
] UI1 - name returned by rtems_object_get_classic_name for Init task id
] UI1 - name returned by rtems_object_get_classic_name for RTEMS_SELF
] TEMP - rtems_build_name for TEMP
] rtems_object_get_name - bad id for class with instances
] rtems_object_get_name - bad id for class without instances
] rtems_object_get_name - bad length
] rtems_object_get_name - bad pointer
] rtems_object_get_name returned (UI1 ) for init task id
] rtems_object_get_name returned (UI1 ) for RTEMS_SELF
] rtems_object_set_name - INVALID_ADDRESS
] rtems_object_set_name - INVALID_ID (bad API)
] rtems_object_set_name - INVALID_ID (bad index)
] rtems_object_set_name - change name of init task to (New1)
] New1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (New1) for init task
] rtems_object_set_name - change name of init task to (Ne1)
] Ne1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (Ne1 ) for init task
] rtems_object_set_name - change name of init task to (N1)
] N1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (N1 ) for init task
] rtems_object_set_name - change name of init task to (N)
] N - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (N ) for init task
] rtems_object_set_name - change name of init task to ()
] - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned ( ) for init task
] rtems_object_set_name - change name of init task to (N-0x07-0x09-1)
] N**1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (N**1) for init task
] rtems_object_set_name - change name of init task to (SELF)
] SELF - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (SELF) for init task
] rtems_object_get_name returned (SELF) for init task id
] rtems_build_id - build an id to match init task
] rtems_object_id_get_api - OK
] rtems_object_id_get_class - OK
] rtems_object_id_get_node - OK
] rtems_object_id_get_index - OK
] rtems_object_id_api_minimum returned 1
] rtems_object_id_api_maximum returned 3
] rtems_object_api_minimum_class(0) returned -1
] rtems_object_api_maximum_class(0) returned 0
] rtems_object_api_minimum_class(0) returned -1
] rtems_object_api_maximum_class(0) returned 0
] rtems_object_api_minimum_class(255) returned -1
] rtems_object_api_maximum_class(255) returned 0
] rtems_object_api_minimum_class(OBJECTS_INTERNAL_API) returned 1
] rtems_object_api_maximum_class(OBJECTS_INTERNAL_API) returned 1
] rtems_object_api_minimum_class(OBJECTS_CLASSIC_API) returned 1
] rtems_object_api_maximum_class(OBJECTS_CLASSIC_API) returned 10
] rtems_object_get_api_name(0) = BAD CLASS
] rtems_object_get_api_name(255) = BAD CLASS
] rtems_object_get_api_name(INTERNAL_API) = Internal
] rtems_object_get_api_name(CLASSIC_API) = Classic
] rtems_object_get_api_class_name(0, RTEMS_TASKS) = BAD API
] rtems_object_get_api_class_name(CLASSIC_API, 0) = BAD CLASS
] rtems_object_get_api_class_name(INTERNAL_API, THREADS) = Thread
] rtems_object_get_api_class_name(CLASSIC_API, RTEMS_BARRIERS) = Barrier
] rtems_object_get_class_information - INVALID_ADDRESS
] rtems_object_get_class_information - INVALID_NUMBER (bad API)
] rtems_object_get_class_information - INVALID_NUMBER (api=0xff)
] rtems_object_get_class_information - INVALID_NUMBER (class=0)
] rtems_object_get_class_information - INVALID_NUMBER (class too high)
] rtems_object_get_class_information - Classic Tasks - OK
] Classic API Task Information
] minimum id : 0x0a010001 maximum id: 0x0a010002
] maximum : 2 available : 1
] auto_extend : no
] rtems_object_get_class_information - Classic Timers - OK
] Classic API Timer Information
] minimum id : 0x12010001 maximum id: 0x12010001
] maximum : 1 available : 1
] auto_extend : no
] rtems_task_set_priority - use valid Idle thread id
] rtems_task_set_priority - clobber internal thread class info
=> test end: SP 43
] *** TIMEOUT TIMEOUT
[430/675] p:375 f:5 u:6 e:22 I:0 B:3 t:10 L:0 i:1 W:0 | powerpc/psim: sp44.exe
Result: timeout
Time: 0:03:09.859293 sp44.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp44.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp44.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp44.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp44.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp44.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 44
] *** BEGIN OF TEST SP 44 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] Task #0's turn. Now setting turn to 1
] Task #1's turn. Now setting turn to 0
] Task #0's turn. Now setting turn to 1
] Task #1's turn. Now setting turn to 0
] Task #0's turn. Now setting turn to 1
] Task #1's turn. Now setting turn to 0
=> test end: SP 44
] *** TIMEOUT TIMEOUT
[431/675] p:376 f:5 u:6 e:22 I:0 B:3 t:10 L:0 i:1 W:0 | powerpc/psim: sp45.exe
<<skipping passes>>
[601/675] p:541 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: sptimespec01.exe
Result: timeout
Time: 0:03:10.834930 sptimespec01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPTIMESPEC 1
] *** BEGIN OF TEST SPTIMESPEC 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] rtems_timespec_add_to test PASSED
] rtems_timespace_divide test -part1- divide by non-zero PASSED
] rtems_timespace_divide test -part2- divide by zero PASSED
] rtems_timespec_divide_by_integer test PASSED
=> test end: SPTIMESPEC 1
] *** TIMEOUT TIMEOUT
[602/675] p:542 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: sptls01.exe
<<skipping passes>>
[614/675] p:554 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tm04.exe
Result: timeout
Time: 0:03:11.961999 tm04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm04.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm04.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm04.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm04.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm04.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] THE TIMES REPORTED BY THIS TEST INCLUDE DEBUG CODE!
=> test start: TIME TEST 4
] *** BEGIN OF TEST TIME TEST 4 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] rtems_task_restart: blocked task preempts caller - 1917
] rtems_task_restart: ready task -- preempts caller - 2014
] rtems_semaphore_release: task readied -- returns to caller - 362
=> test end: TIME TEST 4
] *** TIMEOUT TIMEOUT
[615/675] p:555 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tm05.exe
<<skipping passes>>
[629/675] p:569 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tm19.exe
Result: timeout
Time: 0:03:12.986000 tm19.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm19.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm19.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm19.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm19.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm19.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] THE TIMES REPORTED BY THIS TEST INCLUDE DEBUG CODE!
=> test start: TIME TEST 19
] *** BEGIN OF TEST TIME TEST 19 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] rtems_signal_catch: only case - 31
] rtems_signal_send: returns to caller - 176
] rtems_signal_send: signal to self - 212
] rtems_signal: exit ASR overhead returns to calling task - 72
=> test end: TIME TEST 19
] *** TIMEOUT TIMEOUT
[630/675] p:570 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tm20.exe
<<skipping passes>>
[637/675] p:577 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tm27.exe
Result: timeout
Time: 0:03:12.364089 tm27.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm27.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm27.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm27.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm27.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm27.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] THE TIMES REPORTED BY THIS TEST INCLUDE DEBUG CODE!
=> test start: TIME TEST 27
] *** BEGIN OF TEST TIME TEST 27 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] rtems interrupt: entry overhead returns to interrupted task - 104
] rtems interrupt: exit overhead returns to interrupted task - 104
=> test end: TIME TEST 27
] *** TIMEOUT TIMEOUT
[638/675] p:578 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tm28.exe
<<skipping passes>>
[649/675] p:589 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tmfine01.exe
Result: timeout
Time: 0:03:18.629249 tmfine01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TMFINE 1
] *** BEGIN OF TEST TMFINE 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] *** BEGIN OF JSON DATA ***
] [
] {
] "type": "event",
] "description": "Send Event to Self",
] "counter": [
] [77575]
] ]
] }, {
] "type": "event",
] "description": "Send Event to One",
] "counter": [
] [75926]
] ]
] }, {
] "type": "contested-mutex",
] "description": "Obtain/Release Contested Classic Inheritance Mutex",
] "counter": [
] [34778]
] ]
] }, {
] "type": "message",
] "description": "Send Message to Self",
] "counter": [
] [20173]
] ]
] }, {
] "type": "message",
] "description": "Send Message to One Receiver",
] "counter": [
] [20134]
] ]
] }, {
] "type": "private-mutex",
] "description": "Obtain/Release Private Pthread Spinlock",
] "counter": [
] [473594]
] ]
] }, {
] "type": "private-mutex",
] "description": "Obtain/Release Private <sys/lock.h> Mutex",
] "counter": [
] [53759]
] ]
] }, {
] "type": "private-mutex",
] "description": "Obtain/Release Private Pthread Inheritance Mutex",
] "counter": [
] [40760]
] ]
] }, {
] "type": "private-mutex",
] "description": "Obtain/Release Private Classic Inheritance Mutex",
] "counter": [
] [34771]
] ]
] }, {
] "type": "private-mutex",
] "description": "Obtain/Release Private Pthread Ceiling Mutex",
] "counter": [
] [10907]
] ]
] }, {
] "type": "private-mutex",
] "description": "Obtain/Release Private Classic Ceiling Mutex",
] "counter": [
] [10470]
] ]
] }, {
] "type": "private-mutex",
=> test end: TMFINE 1
] *** TIMEOUT TIMEOUT
[650/675] p:590 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tmonetoone.exe
[651/675] p:591 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: tmtimer01.exe
Result: timeout
Time: 0:03:25.022281 tmtimer01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] *** TEST VERSION: 6.0.0.38bafce42de94a7408760ccfca059b0681d77d51
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d2f00ca6c06f0f5c78eab1128121e9c58fba0443, Newlib 1b3dcfd)
] *** BEGIN OF JSON DATA ***
] {
] "timer-count": 21888,
] "samples": [
] {
] "active-timers": 0,
] "first": 173,
] "middle": 173,
] "last": 173
] }, {
] "active-timers": 2,
] "first": 187,
] "middle": 229,
] "last": 180
] }, {
] "active-timers": 4,
] "first": 199,
] "middle": 193,
] "last": 226
] }, {
] "active-timers": 7,
] "first": 199,
] "middle": 205,
] "last": 256
] }, {
] "active-timers": 10,
] "first": 211,
] "middle": 205,
] "last": 251
] }, {
] "active-timers": 14,
] "first": 211,
] "middle": 218,
] "last": 264
] }, {
] "active-timers": 19,
] "first": 223,
] "middle": 217,
] "last": 283
] }, {
] "active-timers": 25,
] "first": 223,
] "middle": 230,
] "last": 312
] }, {
] "active-timers": 32,
] "first": 223,
] "middle": 230,
] "last": 290
] }, {
] "active-timers": 41,
] "first": 235,
] "middle": 230,
] "last": 325
] }, {
] "active-timers": 52,
] "first": 235,
] "middle": 243,
] "last": 302
] }, {
] "active-timers": 66,
] "first": 235,
] "middle": 242,
] "last": 315
] }, {
] "active-timers": 83,
] "first": 247,
] "middle": 242,
] "last": 334
] }, {
] "active-timers": 104,
] "first": 247,
] "middle": 255,
] "last": 328
] }, {
] "active-timers": 130,
] "first": 247,
] "middle": 254,
] "last": 341
] }, {
] @"
]
] }, {
] "active-timers": 881,
] "first": 283,
] "middle": 292,
] "last": 440
] }, {
] "active-timers": 1085,
] "first": 283,
] "middle": 293,
] "last": 518
] }, {
] "active-timers": 1336,
] "first": 295,
] "middle": 292,
] "last": 417
] }, {
] "active-timers": 1645,
] "first": 295,
] "middle": 305,
] "last": 498
] }, {
] "active-timers": 2025,
] "first": 295,
] "middle": 306,
] "last": 465
] }, {
] "active-timers": 2492,
] "first": 295,
] "middle": 319,
] "last": 443
] }, {
] "active-timers": 3067,
] "first": 307,
] "middle": 307,
] "last": 462
] }, {
] "active-timers": 3774,
] "first": 307,
] "middle": 319,
] "last": 456
] }, {
] "active-timers": 4644,
] "first": 307,
] "middle": 329,
] "last": 468
] }, {
] "active-timers": 5714,
] "first": 319,
] "middle": 317,
] "last": 468
] }, {
] "active-timers": 7030,
] "first": 319,
] "middle": 331,
] "last": 481
] }, {
] "active-timers": 8649,
] "first": 319,
] "middle": 329,
] "last": 529
] }, {
] "active-timers": 10640,
] "first": 331,
] "middle": 329,
] "last": 494
] }, {
] "active-timers": 13089,
] "first": 331,
] "middle": 341,
] "last": 542
] }, {
] "active-timers": 16101,
] "first": 331,
] "middle": 343,
] "last": 558
] }, {
] "active-timers": 19806,
=> test end: TMTIMER 1
] *** TIMEOUT TIMEOUT
[652/675] p:592 f:6 u:6 e:22 I:0 B:3 t:14 L:0 i:1 W:0 | powerpc/psim: ts-unit-no-clock-0.exe
<<skipping passes>>
[675/675] p:611 f:7 u:6 e:23 I:0 B:3 t:16 L:0 i:1 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 615
Failed: 7
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 20
Test too long: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 675
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
block07.exe
block08.exe
capture01.exe
complex.exe
jffs2_fserror.exe
psxbarrier01.exe
psxcond02.exe
psxid01.exe
psxkey07.exe
psxpasswd01.exe
psxtmrwlock05.exe
sp32.exe
sp43.exe
sp44.exe
sptimespec01.exe
tm04.exe
tm19.exe
tm27.exe
tmfine01.exe
tmtimer01.exe
Invalid:
sp11.exe
Average test time: 0:00:01.951914
Testing time : 0:21:57.542240
More information about the build
mailing list