RTEMS libbsd port: how to link the driver

[Sebastian Huber]

Hello,

do you refer to the new network stack 
(https://git.rtems.org/rtems-libbsd)? There is documentation in the file 
'libbsd.txt', but I have to admit its poorly documented, mainly due to 
lack of time and budget.  For the driver registration see the file 
nexus-devices.h and the tests.

On 06/04/15 21:12, ragu nath wrote:
> Hi,
>
> What is the procedure to link a network driver to the application in
> rtems libbsd port? The drivers are compiled and available in the
> libbsd archive. I dont know how to link the driver to the application.
>
> I followed the RTEMS NETWORKING supplement document and tried defining
> the following structures. But it did not work
>
> static struct rtems_bsdnet_ifconfig netdriver_config = {
> RTEMS_BSP_NETWORK_DRIVER_NAME,
> RTEMS_BSP_NETWORK_DRIVER_ATTACH
> };
> struct rtems_bsdnet_config rtems_bsdnet_config = {
> &netdriver_config,
> rtems_bsdnet_do_bootp,
> };
>
> If there is any latest documentation available, pls let me know.
>
> Thanks,
> Ragunath
> _______________________________________________
> devel mailing list
> devel at rtems.org
> http://lists.rtems.org/mailman/listinfo/devel

-- 
Sebastian Huber, embedded brains GmbH

Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone   : +49 89 189 47 41-16
Fax     : +49 89 189 47 41-09
E-Mail  : sebastian.huber at embedded-brains.de
PGP     : Public key available on request.

Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.