SPARC BSP Build Failures

[Joel Sherrill]

Hi

I have done two recent sweeps with rtems-bsp-builder and a number of odd
SPARC BSP build failures occur. I haven't been able to reproduce them with
by-hand builds.

https://lists.rtems.org/pipermail/build/2018-August/000903.html


This is the relevant part of the summary. Anyone got any ideas? These are
not good BSPs to have build problems with. :(

   8 smp sparc/gr712rc build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
      --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

   9 smp-debug sparc/gr712rc build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  10 smp-network sparc/gr712rc build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
      --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  11 smp-network-debug sparc/gr712rc build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  12 smp sparc/gr740 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
      --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  13 smp-debug sparc/gr740 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  14 smp-network sparc/gr740 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
      --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  15 smp-network-debug sparc/gr740 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  16 smp sparc/leon3 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
      --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  17 smp-debug sparc/leon3 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  18 smp-network sparc/leon3 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
      --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  19 smp-network-debug sparc/leon3 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  20 smp sparc/ut699 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
      --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  21 smp-debug sparc/ut699 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  22 smp-network sparc/ut699 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
      --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  23 smp-network-debug sparc/ut699 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  24 smp sparc/ut700 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
      --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  25 smp-debug sparc/ut700 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  26 smp-network sparc/ut700 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
      --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'

  27 smp-network-debug sparc/ut700 build:
      configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
      rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
      --enable-rtems-debug --enable-networking --enable-smp
     error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
            `mv'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20180803/84012f35/attachment-0001.html>