SPARC BSP Build Failures

[Sebastian Huber]

Please use the latest master.

----- Joel Sherrill <joel at rtems.org> schrieb:
> Hi
> 
> I have done two recent sweeps with rtems-bsp-builder and a number of odd
> SPARC BSP build failures occur. I haven't been able to reproduce them with
> by-hand builds.
> 
> https://lists.rtems.org/pipermail/build/2018-August/000903.html
> 
> 
> This is the relevant part of the summary. Anyone got any ideas? These are
> not good BSPs to have build problems with. :(
> 
>    8 smp sparc/gr712rc build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
>       --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>    9 smp-debug sparc/gr712rc build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   10 smp-network sparc/gr712rc build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
>       --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   11 smp-network-debug sparc/gr712rc build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   12 smp sparc/gr740 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
>       --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   13 smp-debug sparc/gr740 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   14 smp-network sparc/gr740 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
>       --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   15 smp-network-debug sparc/gr740 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   16 smp sparc/leon3 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
>       --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   17 smp-debug sparc/leon3 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   18 smp-network sparc/leon3 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
>       --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   19 smp-network-debug sparc/leon3 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   20 smp sparc/ut699 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
>       --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   21 smp-debug sparc/ut699 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   22 smp-network sparc/ut699 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
>       --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   23 smp-network-debug sparc/ut699 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   24 smp sparc/ut700 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
>       --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   25 smp-debug sparc/ut700 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   26 smp-network sparc/ut700 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
>       --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'
> 
>   27 smp-network-debug sparc/ut700 build:
>       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
>       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\
>       --enable-rtems-debug --enable-networking --enable-smp
>      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
>             `mv'

-- 
Sebastian Huber, embedded brains GmbH

Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone   : +49 89 189 47 41-16
Fax     : +49 89 189 47 41-09
E-Mail  : sebastian.huber at embedded-brains.de
PGP     : Public key available on request.

Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.