SPARC BSP Build Failures

[Joel Sherrill]

OK. Weird that I couldn't reproduce this by hand though.

Need to build new tools so this may take a while.

--joel

On Fri, Aug 3, 2018 at 9:41 AM, Sebastian Huber <
sebastian.huber at embedded-brains.de> wrote:

> Please use the latest master.
>
> ----- Joel Sherrill <joel at rtems.org> schrieb:
> > Hi
> >
> > I have done two recent sweeps with rtems-bsp-builder and a number of odd
> > SPARC BSP build failures occur. I haven't been able to reproduce them
> with
> > by-hand builds.
> >
> > https://lists.rtems.org/pipermail/build/2018-August/000903.html
> >
> >
> > This is the relevant part of the summary. Anyone got any ideas? These are
> > not good BSPs to have build problems with. :(
> >
> >    8 smp sparc/gr712rc build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >    9 smp-debug sparc/gr712rc build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   10 smp-network sparc/gr712rc build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   11 smp-network-debug sparc/gr712rc build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   12 smp sparc/gr740 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   13 smp-debug sparc/gr740 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   14 smp-network sparc/gr740 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   15 smp-network-debug sparc/gr740 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   16 smp sparc/leon3 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   17 smp-debug sparc/leon3 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   18 smp-network sparc/leon3 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   19 smp-network-debug sparc/leon3 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   20 smp sparc/ut699 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   21 smp-debug sparc/ut699 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   22 smp-network sparc/ut699 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   23 smp-network-debug sparc/ut699 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   24 smp sparc/ut700 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   25 smp-debug sparc/ut700 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   26 smp-network sparc/ut700 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
> >
> >   27 smp-network-debug sparc/ut700 build:
> >       configure: /home/joel/rtems-work/rtems/configure --target=sparc-\
> >       rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-
> work/bsps\
> >       --enable-rtems-debug --enable-networking --enable-smp
> >      error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode:
> >             `mv'
>
> --
> Sebastian Huber, embedded brains GmbH
>
> Address : Dornierstr. 4, D-82178 Puchheim, Germany
> Phone   : +49 89 189 47 41-16
> Fax     : +49 89 189 47 41-09
> E-Mail  : sebastian.huber at embedded-brains.de
> PGP     : Public key available on request.
>
> Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20180803/76b5d438/attachment-0002.html>