[PATCH v2] tester: Add script to generate html coverage report from covoar output
Joel Sherrill
joel at rtems.org
Fri Jun 1 13:54:33 UTC 2018
On Fri, Jun 1, 2018 at 2:46 AM, Vijay Kumar Banerjee <
vijaykumar9597 at gmail.com> wrote:
> Here's the list of Ideas for improvements:
>
> 1. Include the section coverage in the bsp config file.
> If the section is not found then the script will show
> proper error showing coverage is not supported for the
> provided bsp config file.
>
> 2. Update covoar to add support for separate coverage report
> for each symbol set.
>
> 3. Add a method somewhere in covoar to get the size of an instruction
> and fix the hard coded size 4 in ObjdumpProcessor.cc
>
What about a single XXX_run command? What about that suggestion?
Will there be an update to this patch?
Once I have the final patch, I think I will push it along with my two
covoar patches. Those will keep the GSoC project moving on sparc
until I can really fix the "+4" issue.
>
>
> On 1 June 2018 at 04:43, Joel Sherrill <joel at rtems.org> wrote:
>
>> Just chatted with Chris. The coverage BSP ini file was a temporary
>> measure as I thought.
>>
>> Make a list of all the ideas we have had for improvements. We want
>> the code to get onto master.
>>
>> The list should be converted to Trac tickets very soon. Then we can
>> decide which are critical for GSoC, which Chris or I will work on, and
>> which are part of your GSoC.
>>
>> --joel
>>
>> On Thu, May 31, 2018 at 5:18 PM, Vijay Kumar Banerjee <
>> vijaykumar9597 at gmail.com> wrote:
>>
>>>
>>>
>>> On Fri, 1 Jun 2018, 03:40 Joel Sherrill, <joel at rtems.org> wrote:
>>>
>>>>
>>>>
>>>> On Thu, May 31, 2018 at 4:57 PM, Vijay Kumar Banerjee <
>>>> vijaykumar9597 at gmail.com> wrote:
>>>>
>>>>> On 1 June 2018 at 02:50, Joel Sherrill <joel at rtems.org> wrote:
>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, May 31, 2018 at 4:15 PM, Cillian O'Donnell <
>>>>>> cpodonnell8 at gmail.com> wrote:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Thu, 31 May 2018, 22:03 Vijay Kumar Banerjee, <
>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>
>>>>>>>> On 1 June 2018 at 02:14, Cillian O'Donnell <cpodonnell8 at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> There is now a seperate bsp config for coverage, leon3-qemu-cov.
>>>>>>>>> That is enough to trigger coverage now and --coverage could be reserved for
>>>>>>>>> picking sets, probably renamed to --coverage-sets=... Or require sets to be
>>>>>>>>> chosen --coverage-sets=all or specific sets --coverage-sets=score,sapi,cor
>>>>>>>>> e
>>>>>>>>>
>>>>>>>>> Actually the idea of having separate bsp configs for cov
>>>>>>>> in each of the bsps will create a lot of files. The intention is
>>>>>>>> to make it simple for the user. just adding --coverage
>>>>>>>> should run coverage analysis. There's a plan to include
>>>>>>>> the 'coverage' section into the bsp ini file, and hence the user
>>>>>>>> wouldn't
>>>>>>>> have to keep switching the bsp config files.
>>>>>>>>
>>>>>>>
>>>>>>> Actually that's exactly the way I had it working before Chris'
>>>>>>> recent changes, he had a look at the way it's working and chose to create
>>>>>>> seperate bsp config files. That may be the way he'd prefer. This was before
>>>>>>> the --coverage option had another use other than triggering coverage, so
>>>>>>> his thoughts may have changed on it.
>>>>>>>
>>>>>>
>>>>>> Chris should comment on the separate ini files. I think that might
>>>>>> have been
>>>>>> driven by couverture vs regular qemu before couverture was available
>>>>>> from
>>>>>> the RSB.
>>>>>>
>>>>>> Okay, we wait for Chris to comment on it then.
>>>>>
>>>>>> I think it would be nice to have --coverage and if the BSP ini file
>>>>>> doesn't support
>>>>>> coverage, give an error.
>>>>>>
>>>>>>
>>>>> Is the set option in the Python and processed by covoar in a way that
>>>>>> still
>>>>>> lets covoar be used on something besides RTEMS?
>>>>>>
>>>>>>
>>>>> yes, it is totally handled by the script to 'feed' covoar with the
>>>>> options,
>>>>> without changing the way it works.
>>>>>
>>>>> I have a question/doubt.
>>>>> By adding separate bsp config for cov. Are we not assuming that
>>>>> the provided bsp ini supports coverage ?
>>>>>
>>>>
>>>> I think having two leon3 configurations like we do now is temporary
>>>> just to have something that works. Any changes to the coverage
>>>> version don't impact the baseline.
>>>>
>>> Understood. Thanks.
>>>
>>>
>>>> I am hoping Chris has an idea to unified these. :)
>>>>
>>>>
>>>>>
>>>>>
>>>>>>>> The idea of modifying it to --coverage-sets=all ;
>>>>>>>> --coverage-sets=set1,set2,set3..... can surely be implemented
>>>>>>>> in place of --coverage ; --coverage=set1,set2....
>>>>>>>>
>>>>>>>>> On Thu, 31 May 2018, 21:29 Vijay Kumar Banerjee, <
>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> On 1 June 2018 at 01:57, Cillian O'Donnell <cpodonnell8 at gmail.com
>>>>>>>>>> > wrote:
>>>>>>>>>>
>>>>>>>>>>> So is it checking whether it's --coverage or
>>>>>>>>>>> --coverage=set1,set2? Are those the 2 possibilities your checking?
>>>>>>>>>>>
>>>>>>>>>>> Yes, right. :)
>>>>>>>>>>
>>>>>>>>>>> On Thu, 31 May 2018, 20:52 Vijay Kumar Banerjee, <
>>>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> On 1 June 2018 at 01:19, Gedare Bloom <gedare at rtems.org> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, May 31, 2018 at 3:47 PM, Vijay Kumar Banerjee
>>>>>>>>>>>>> <vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>>> > On 1 June 2018 at 01:07, Cillian O'Donnell <
>>>>>>>>>>>>> cpodonnell8 at gmail.com> wrote:
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >> On 31 May 2018 at 19:07, Vijay Kumar Banerjee <
>>>>>>>>>>>>> vijaykumar9597 at gmail.com>
>>>>>>>>>>>>> >> wrote:
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> Add support in tester to run covoar and generate an html
>>>>>>>>>>>>> report to
>>>>>>>>>>>>> >>> display
>>>>>>>>>>>>> >>> the summary of the coverage reports generated from covoar.
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> Co-authored-by : Cillian O'Donnell <cpodonnell8 at gmail.com>
>>>>>>>>>>>>> >>> ---
>>>>>>>>>>>>> >>> tester/rt/coverage.py | 379
>>>>>>>>>>>>> >>> ++++++++++++++++++++++++++
>>>>>>>>>>>>> >>> tester/rt/test.py | 36 ++-
>>>>>>>>>>>>> >>> tester/rtems/testing/bsps/leon3-qemu-cov.ini | 3 +-
>>>>>>>>>>>>> >>> tester/rtems/testing/coverage/symbol-sets.ini | 36 +++
>>>>>>>>>>>>> >>> tester/rtems/testing/qemu.cfg | 4 +-
>>>>>>>>>>>>> >>> 5 files changed, 446 insertions(+), 12 deletions(-)
>>>>>>>>>>>>> >>> create mode 100644 tester/rt/coverage.py
>>>>>>>>>>>>> >>> create mode 100644 tester/rtems/testing/coverage/
>>>>>>>>>>>>> symbol-sets.ini
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> diff --git a/tester/rt/coverage.py b/tester/rt/coverage.py
>>>>>>>>>>>>> >>> new file mode 100644
>>>>>>>>>>>>> >>> index 0000000..25fbb9d
>>>>>>>>>>>>> >>> --- /dev/null
>>>>>>>>>>>>> >>> +++ b/tester/rt/coverage.py
>>>>>>>>>>>>> >>> @@ -0,0 +1,379 @@
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# RTEMS Tools Project (http://www.rtems.org/)
>>>>>>>>>>>>> >>> +# Copyright 2014 Krzysztof Miesowicz (
>>>>>>>>>>>>> krzysztof.miesowicz at gmail.com)
>>>>>>>>>>>>> >>> +# All rights reserved.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# This file is part of the RTEMS Tools package in
>>>>>>>>>>>>> 'rtems-tools'.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# Redistribution and use in source and binary forms, with
>>>>>>>>>>>>> or without
>>>>>>>>>>>>> >>> +# modification, are permitted provided that the following
>>>>>>>>>>>>> conditions are
>>>>>>>>>>>>> >>> met:
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# 1. Redistributions of source code must retain the above
>>>>>>>>>>>>> copyright
>>>>>>>>>>>>> >>> notice,
>>>>>>>>>>>>> >>> +# this list of conditions and the following disclaimer.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# 2. Redistributions in binary form must reproduce the
>>>>>>>>>>>>> above copyright
>>>>>>>>>>>>> >>> notice,
>>>>>>>>>>>>> >>> +# this list of conditions and the following disclaimer in
>>>>>>>>>>>>> the
>>>>>>>>>>>>> >>> documentation
>>>>>>>>>>>>> >>> +# and/or other materials provided with the distribution.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
>>>>>>>>>>>>> CONTRIBUTORS
>>>>>>>>>>>>> >>> 'AS IS'
>>>>>>>>>>>>> >>> +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
>>>>>>>>>>>>> NOT LIMITED TO,
>>>>>>>>>>>>> >>> THE
>>>>>>>>>>>>> >>> +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
>>>>>>>>>>>>> PARTICULAR
>>>>>>>>>>>>> >>> PURPOSE
>>>>>>>>>>>>> >>> +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER
>>>>>>>>>>>>> OR CONTRIBUTORS
>>>>>>>>>>>>> >>> BE
>>>>>>>>>>>>> >>> +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
>>>>>>>>>>>>> EXEMPLARY, OR
>>>>>>>>>>>>> >>> +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
>>>>>>>>>>>>> PROCUREMENT OF
>>>>>>>>>>>>> >>> +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
>>>>>>>>>>>>> PROFITS; OR
>>>>>>>>>>>>> >>> BUSINESS
>>>>>>>>>>>>> >>> +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
>>>>>>>>>>>>> LIABILITY, WHETHER
>>>>>>>>>>>>> >>> IN
>>>>>>>>>>>>> >>> +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
>>>>>>>>>>>>> NEGLIGENCE OR
>>>>>>>>>>>>> >>> OTHERWISE)
>>>>>>>>>>>>> >>> +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
>>>>>>>>>>>>> EVEN IF ADVISED OF
>>>>>>>>>>>>> >>> THE
>>>>>>>>>>>>> >>> +# POSSIBILITY OF SUCH DAMAGE.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +from rtemstoolkit import error
>>>>>>>>>>>>> >>> +from rtemstoolkit import path
>>>>>>>>>>>>> >>> +from rtemstoolkit import log
>>>>>>>>>>>>> >>> +from rtemstoolkit import execute
>>>>>>>>>>>>> >>> +from rtemstoolkit import macros
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +from datetime import datetime
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +from . import options
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +import shutil
>>>>>>>>>>>>> >>> +import os
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +try:
>>>>>>>>>>>>> >>> + import configparser
>>>>>>>>>>>>> >>> +except:
>>>>>>>>>>>>> >>> + import ConfigParser as configparser
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +class summary:
>>>>>>>>>>>>> >>> + def __init__(self, p_summary_dir):
>>>>>>>>>>>>> >>> + self.summary_file_path = path.join(p_summary_dir,
>>>>>>>>>>>>> 'summary.txt')
>>>>>>>>>>>>> >>> + self.index_file_path = path.join(p_summary_dir,
>>>>>>>>>>>>> 'index.html')
>>>>>>>>>>>>> >>> + self.bytes_analyzed = 0
>>>>>>>>>>>>> >>> + self.bytes_not_executed = 0
>>>>>>>>>>>>> >>> + self.percentage_executed = 0.0
>>>>>>>>>>>>> >>> + self.percentage_not_executed = 100.0
>>>>>>>>>>>>> >>> + self.ranges_uncovered = 0
>>>>>>>>>>>>> >>> + self.branches_uncovered = 0
>>>>>>>>>>>>> >>> + self.branches_total = 0
>>>>>>>>>>>>> >>> + self.branches_always_taken = 0
>>>>>>>>>>>>> >>> + self.branches_never_taken = 0
>>>>>>>>>>>>> >>> + self.percentage_branches_covered = 0.0
>>>>>>>>>>>>> >>> + self.is_failure = False
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def parse(self):
>>>>>>>>>>>>> >>> + if(not path.exists(self.summary_file_path)):
>>>>>>>>>>>>> >>> + log.notice('summary file %s does not exist!' %
>>>>>>>>>>>>> >>> (self.summary_file_path))
>>>>>>>>>>>>> >>> + self.is_failure = True
>>>>>>>>>>>>> >>> + return
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + with open(self.summary_file_path,'r') as
>>>>>>>>>>>>> summary_file:
>>>>>>>>>>>>> >>> + self.bytes_analyzed =
>>>>>>>>>>>>> self._get_next_with_colon(summary_file)
>>>>>>>>>>>>> >>> + self.bytes_not_executed =
>>>>>>>>>>>>> >>> self._get_next_with_colon(summary_file)
>>>>>>>>>>>>> >>> + self.percentage_executed =
>>>>>>>>>>>>> >>> self._get_next_with_colon(summary_file)
>>>>>>>>>>>>> >>> + self.percentage_not_executed =
>>>>>>>>>>>>> >>> self._get_next_with_colon(summary_file)
>>>>>>>>>>>>> >>> + self.ranges_uncovered =
>>>>>>>>>>>>> >>> self._get_next_with_colon(summary_file)
>>>>>>>>>>>>> >>> + self.branches_total =
>>>>>>>>>>>>> self._get_next_with_colon(summary_file)
>>>>>>>>>>>>> >>> + self.branches_uncovered =
>>>>>>>>>>>>> >>> self._get_next_with_colon(summary_file)
>>>>>>>>>>>>> >>> + self.branches_always_taken =
>>>>>>>>>>>>> >>> self._get_next_without_colon(summary_file)
>>>>>>>>>>>>> >>> + self.branches_never_taken =
>>>>>>>>>>>>> >>> self._get_next_without_colon(summary_file)
>>>>>>>>>>>>> >>> + if len(self.branches_uncovered) > 0 and
>>>>>>>>>>>>> len(self.branches_total)
>>>>>>>>>>>>> >>> > 0:
>>>>>>>>>>>>> >>> + self.percentage_branches_covered = \
>>>>>>>>>>>>> >>> + 1 - (float(self.branches_uncovered) /
>>>>>>>>>>>>> >>> float(self.branches_total))
>>>>>>>>>>>>> >>> + else:
>>>>>>>>>>>>> >>> + self.percentage_branches_covered = 0.0
>>>>>>>>>>>>> >>> + return
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _get_next_with_colon(self, summary_file):
>>>>>>>>>>>>> >>> + line = summary_file.readline()
>>>>>>>>>>>>> >>> + if ':' in line:
>>>>>>>>>>>>> >>> + return line.split(':')[1].strip()
>>>>>>>>>>>>> >>> + else:
>>>>>>>>>>>>> >>> + return ''
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _get_next_without_colon(self, summary_file):
>>>>>>>>>>>>> >>> + line = summary_file.readline()
>>>>>>>>>>>>> >>> + return line.strip().split(' ')[0]
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +class report_gen_html:
>>>>>>>>>>>>> >>> + def __init__(self, p_symbol_sets_list, build_dir,
>>>>>>>>>>>>> rtdir):
>>>>>>>>>>>>> >>> + self.symbol_sets_list = ['score']
>>>>>>>>>>>>> >>> + self.build_dir = build_dir
>>>>>>>>>>>>> >>> + self.partial_reports_files = list(["index.html",
>>>>>>>>>>>>> "summary.txt"])
>>>>>>>>>>>>> >>> + self.number_of_columns = 1
>>>>>>>>>>>>> >>> + self.covoar_src_path = path.join(rtdir, 'covoar')
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _find_partial_reports(self):
>>>>>>>>>>>>> >>> + partial_reports = {}
>>>>>>>>>>>>> >>> + for symbol_set in self.symbol_sets_list:
>>>>>>>>>>>>> >>> + set_summary = summary(path.join(self.build_dir,
>>>>>>>>>>>>> "coverage",
>>>>>>>>>>>>> >>> + symbol_set))
>>>>>>>>>>>>> >>> + set_summary.parse()
>>>>>>>>>>>>> >>> + partial_reports[symbol_set] = set_summary
>>>>>>>>>>>>> >>> + return partial_reports
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _prepare_head_section(self):
>>>>>>>>>>>>> >>> + head_section = '''
>>>>>>>>>>>>> >>> + <head>
>>>>>>>>>>>>> >>> + <title>RTEMS coverage report</title>
>>>>>>>>>>>>> >>> + <style type="text/css">
>>>>>>>>>>>>> >>> + progress[value] {
>>>>>>>>>>>>> >>> + -webkit-appearance: none;
>>>>>>>>>>>>> >>> + appearance: none;
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + width: 150px;
>>>>>>>>>>>>> >>> + height: 15px;
>>>>>>>>>>>>> >>> + }
>>>>>>>>>>>>> >>> + </style>
>>>>>>>>>>>>> >>> + </head>'''
>>>>>>>>>>>>> >>> + return head_section
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _prepare_index_content(self, partial_reports):
>>>>>>>>>>>>> >>> + header = "<h1> RTEMS coverage analysis report
>>>>>>>>>>>>> </h1>"
>>>>>>>>>>>>> >>> + header += "<h3>Coverage reports by symbols
>>>>>>>>>>>>> sets:</h3>"
>>>>>>>>>>>>> >>> + table = "<table>"
>>>>>>>>>>>>> >>> + table += self._header_row()
>>>>>>>>>>>>> >>> + for symbol_set in partial_reports:
>>>>>>>>>>>>> >>> + table += self._row(symbol_set,
>>>>>>>>>>>>> partial_reports[symbol_set])
>>>>>>>>>>>>> >>> + table += "</table> </br>"
>>>>>>>>>>>>> >>> + timestamp = "Analysis performed on " +
>>>>>>>>>>>>> datetime.now().ctime()
>>>>>>>>>>>>> >>> + return "<body>\n" + header + table + timestamp +
>>>>>>>>>>>>> "\n</body>"
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _row(self, symbol_set, summary):
>>>>>>>>>>>>> >>> + row = "<tr>"
>>>>>>>>>>>>> >>> + row += "<td>" + symbol_set + "</td>"
>>>>>>>>>>>>> >>> + if summary.is_failure:
>>>>>>>>>>>>> >>> + row += ' <td colspan="' +
>>>>>>>>>>>>> str(self.number_of_columns-1) \
>>>>>>>>>>>>> >>> + + '" style="background-color:red">F
>>>>>>>>>>>>> AILURE</td>'
>>>>>>>>>>>>> >>> + else:
>>>>>>>>>>>>> >>> + row += " <td>" +
>>>>>>>>>>>>> self._link(summary.index_file_path,"Index")
>>>>>>>>>>>>> >>> \
>>>>>>>>>>>>> >>> + + "</td>"
>>>>>>>>>>>>> >>> + row += " <td>" +
>>>>>>>>>>>>> >>> self._link(summary.summary_file_path,"Summary") \
>>>>>>>>>>>>> >>> + + "</td>"
>>>>>>>>>>>>> >>> + row += " <td>" + summary.bytes_analyzed +
>>>>>>>>>>>>> "</td>"
>>>>>>>>>>>>> >>> + row += " <td>" + summary.bytes_not_executed +
>>>>>>>>>>>>> "</td>"
>>>>>>>>>>>>> >>> + row += " <td>" + summary.ranges_uncovered +
>>>>>>>>>>>>> "</td>"
>>>>>>>>>>>>> >>> + row += " <td>" + summary.percentage_executed
>>>>>>>>>>>>> + "%</td>"
>>>>>>>>>>>>> >>> + row += " <td>" +
>>>>>>>>>>>>> summary.percentage_not_executed + "%</td>"
>>>>>>>>>>>>> >>> + row += ' <td><progress value="' +
>>>>>>>>>>>>> >>> summary.percentage_executed \
>>>>>>>>>>>>> >>> + + '" max="100"></progress></td>'
>>>>>>>>>>>>> >>> + row += " <td>" + summary.branches_uncovered +
>>>>>>>>>>>>> "</td>"
>>>>>>>>>>>>> >>> + row += " <td>" + summary.branches_total +
>>>>>>>>>>>>> "</td>"
>>>>>>>>>>>>> >>> + row += " <td> {:.3%}
>>>>>>>>>>>>> >>> </td>".format(summary.percentage_branches_covered)
>>>>>>>>>>>>> >>> + row += ' <td><progress value="{:.3}"
>>>>>>>>>>>>> >>> max="100"></progress></td>'.fo
>>>>>>>>>>>>> rmat(100*summary.percentage_branches_covered)
>>>>>>>>>>>>> >>> + row += "</tr>\n"
>>>>>>>>>>>>> >>> + return row
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _header_row(self):
>>>>>>>>>>>>> >>> + row = "<tr>"
>>>>>>>>>>>>> >>> + row += "<th> Symbols set name </th>"
>>>>>>>>>>>>> >>> + row += "<th> Index file </th>"
>>>>>>>>>>>>> >>> + row += "<th> Summary file </th>"
>>>>>>>>>>>>> >>> + row += "<th> Bytes analyzed </th>"
>>>>>>>>>>>>> >>> + row += "<th> Bytes not executed </th>"
>>>>>>>>>>>>> >>> + row += "<th> Uncovered ranges </th>"
>>>>>>>>>>>>> >>> + row += "<th> Percentage covered </th>"
>>>>>>>>>>>>> >>> + row += "<th> Percentage uncovered </th>"
>>>>>>>>>>>>> >>> + row += "<th> Instruction coverage </th>"
>>>>>>>>>>>>> >>> + row += "<th> Branches uncovered </th>"
>>>>>>>>>>>>> >>> + row += "<th> Branches total </th>"
>>>>>>>>>>>>> >>> + row += "<th> Branches covered percentage </th>"
>>>>>>>>>>>>> >>> + row += "<th> Branches coverage </th>"
>>>>>>>>>>>>> >>> + row += "</tr>\n"
>>>>>>>>>>>>> >>> + self.number_of_columns = row.count('<th>')
>>>>>>>>>>>>> >>> + return row
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _link(self, address, text):
>>>>>>>>>>>>> >>> + return '<a href="' + address + '">' + text +
>>>>>>>>>>>>> '</a>'
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _create_index_file(self, head_section, content):
>>>>>>>>>>>>> >>> + with open(path.join(self.build_dir,"report.html"),'w')
>>>>>>>>>>>>> as f:
>>>>>>>>>>>>> >>> + f.write(head_section)
>>>>>>>>>>>>> >>> + f.write(content)
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def generate(self):
>>>>>>>>>>>>> >>> + partial_reports = self._find_partial_reports()
>>>>>>>>>>>>> >>> + head_section = self._prepare_head_section()
>>>>>>>>>>>>> >>> + index_content = self._prepare_index_content(pa
>>>>>>>>>>>>> rtial_reports)
>>>>>>>>>>>>> >>> + self._create_index_file(head_s
>>>>>>>>>>>>> ection,index_content)
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def add_covoar_src_path(self):
>>>>>>>>>>>>> >>> + table_js_path = path.join(self.covoar_src_path,
>>>>>>>>>>>>> 'table.js')
>>>>>>>>>>>>> >>> + covoar_css_path = path.join(self.covoar_src_path,
>>>>>>>>>>>>> 'covoar.css')
>>>>>>>>>>>>> >>> + for symbol_set in self.symbol_sets_list:
>>>>>>>>>>>>> >>> + symbol_set_dir = path.join(self.build_dir,
>>>>>>>>>>>>> "coverage",
>>>>>>>>>>>>> >>> symbol_set)
>>>>>>>>>>>>> >>> + html_files = os.listdir(symbol_set_dir)
>>>>>>>>>>>>> >>> + for html_file in html_files:
>>>>>>>>>>>>> >>> + html_file = path.join(symbol_set_dir,
>>>>>>>>>>>>> html_file)
>>>>>>>>>>>>> >>> + if path.exists(html_file) and 'html' in
>>>>>>>>>>>>> html_file:
>>>>>>>>>>>>> >>> + with open(html_file, 'r') as f:
>>>>>>>>>>>>> >>> + file_data = f.read()
>>>>>>>>>>>>> >>> + file_data =
>>>>>>>>>>>>> file_data.replace('table.js',
>>>>>>>>>>>>> >>> table_js_path)
>>>>>>>>>>>>> >>> + file_data =
>>>>>>>>>>>>> file_data.replace('covoar.css',
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> covoar_css_path)
>>>>>>>>>>>>> >>> + with open(html_file, 'w') as f:
>>>>>>>>>>>>> >>> + f.write(file_data)
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +class build_path_generator(object):
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + Generates the build path from the path to executables
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + def __init__(self, executables, target):
>>>>>>>>>>>>> >>> + self.executables = executables
>>>>>>>>>>>>> >>> + self.target = target
>>>>>>>>>>>>> >>> + def run(self):
>>>>>>>>>>>>> >>> + build_path = '/'
>>>>>>>>>>>>> >>> + Path = self.executables[0].split('/')
>>>>>>>>>>>>> >>> + for P in Path:
>>>>>>>>>>>>> >>> + if P == self.target:
>>>>>>>>>>>>> >>> + break;
>>>>>>>>>>>>> >>> + else:
>>>>>>>>>>>>> >>> + build_path = path.join(build_path, P)
>>>>>>>>>>>>> >>> + return build_path
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +class symbol_parser(object):
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + Parse the symbol sets ini and create custom ini file
>>>>>>>>>>>>> for covoar
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + def __init__(self, symbol_config_path,
>>>>>>>>>>>>> >>> + symbol_select_path, coverage_arg,
>>>>>>>>>>>>> build_dir):
>>>>>>>>>>>>> >>> + self.symbol_select_file = symbol_select_path
>>>>>>>>>>>>> >>> + self.symbol_file = symbol_config_path
>>>>>>>>>>>>> >>> + self.build_dir = build_dir
>>>>>>>>>>>>> >>> + self.symbol_sets = {}
>>>>>>>>>>>>> >>> + self.cov_arg = coverage_arg
>>>>>>>>>>>>> >>> + self.ssets = []
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def parse(self):
>>>>>>>>>>>>> >>> + config = configparser.ConfigParser()
>>>>>>>>>>>>> >>> + try:
>>>>>>>>>>>>> >>> + config.read(self.symbol_file)
>>>>>>>>>>>>> >>> + if self.cov_arg:
>>>>>>>>>>>>> >>> + self.ssets = self.cov_arg.split(',')
>>>>>>>>>>>>> >>> + else:
>>>>>>>>>>>>> >>> + self.ssets = config.get('symbol-sets',
>>>>>>>>>>>>> >>> 'sets').split(',')
>>>>>>>>>>>>> >>> + self.ssets = [ sset.encode('utf-8') for
>>>>>>>>>>>>> sset in
>>>>>>>>>>>>> >>> self.ssets]
>>>>>>>>>>>>> >>> + for sset in self.ssets:
>>>>>>>>>>>>> >>> + lib = path.join(self.build_dir,
>>>>>>>>>>>>> >>> + config.get('libraries',
>>>>>>>>>>>>> sset))
>>>>>>>>>>>>> >>> + self.symbol_sets[sset] =
>>>>>>>>>>>>> lib.encode('utf-8')
>>>>>>>>>>>>> >>> + except:
>>>>>>>>>>>>> >>> + raise error.general('Symbol set parsing
>>>>>>>>>>>>> failed')
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _write_ini(self):
>>>>>>>>>>>>> >>> + config = configparser.ConfigParser()
>>>>>>>>>>>>> >>> + try:
>>>>>>>>>>>>> >>> + sets = ', '.join(self.symbol_sets.keys())
>>>>>>>>>>>>> >>> + config.add_section('symbol-sets')
>>>>>>>>>>>>> >>> + config.set('symbol-sets', 'sets', sets)
>>>>>>>>>>>>> >>> + for key in self.symbol_sets.keys():
>>>>>>>>>>>>> >>> + config.add_section(key)
>>>>>>>>>>>>> >>> + config.set(key, 'libraries',
>>>>>>>>>>>>> self.symbol_sets[key])
>>>>>>>>>>>>> >>> + with open(self.symbol_select_file, 'w') as
>>>>>>>>>>>>> conf:
>>>>>>>>>>>>> >>> + config.write(conf)
>>>>>>>>>>>>> >>> + except:
>>>>>>>>>>>>> >>> + raise error.general('write failed')
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def run(self):
>>>>>>>>>>>>> >>> + self.parse()
>>>>>>>>>>>>> >>> + self._write_ini()
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +class covoar(object):
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + Covoar runner
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + def __init__(self, base_result_dir, config_dir,
>>>>>>>>>>>>> executables,
>>>>>>>>>>>>> >>> explanations_txt):
>>>>>>>>>>>>> >>> + self.base_result_dir = base_result_dir
>>>>>>>>>>>>> >>> + self.config_dir = config_dir
>>>>>>>>>>>>> >>> + self.executables = ' '.join(executables)
>>>>>>>>>>>>> >>> + self.explanations_txt = explanations_txt
>>>>>>>>>>>>> >>> + self.project_name = 'RTEMS-5'
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def run(self, set_name, symbol_file):
>>>>>>>>>>>>> >>> + covoar_result_dir = path.join(self.base_result_dir,
>>>>>>>>>>>>> set_name)
>>>>>>>>>>>>> >>> + if (not path.exists(covoar_result_dir)):
>>>>>>>>>>>>> >>> + path.mkdir(covoar_result_dir)
>>>>>>>>>>>>> >>> + if (not path.exists(symbol_file)):
>>>>>>>>>>>>> >>> + raise error.general('symbol set file:
>>>>>>>>>>>>> coverage %s was not
>>>>>>>>>>>>> >>> created for covoar, skipping %s'% (symbol_file, set_name))
>>>>>>>>>>>>> >>> + command = ('covoar -S ' + symbol_file
>>>>>>>>>>>>> >>> + + ' -O ' + covoar_result_dir
>>>>>>>>>>>>> >>> + + ' -E ' + self.explanations_txt
>>>>>>>>>>>>> >>> + + ' -p ' + self.project_name + ' ' +
>>>>>>>>>>>>> self.executables)
>>>>>>>>>>>>> >>> + log.notice('Running covoar for %s' % (set_name))
>>>>>>>>>>>>> >>> + print( 'covoar results directory:\n' +
>>>>>>>>>>>>> covoar_result_dir )
>>>>>>>>>>>>> >>> + executor = execute.execute(verbose = True, output
>>>>>>>>>>>>> =
>>>>>>>>>>>>> >>> self.output_handler)
>>>>>>>>>>>>> >>> + exit_code = executor.shell(command,
>>>>>>>>>>>>> cwd=os.getcwd())
>>>>>>>>>>>>> >>> + if (exit_code[0] != 0):
>>>>>>>>>>>>> >>> + raise error.general('covoar failure exit
>>>>>>>>>>>>> code: %d' %
>>>>>>>>>>>>> >>> (exit_code[0]))
>>>>>>>>>>>>> >>> + log.notice('Coverage run for %s finished
>>>>>>>>>>>>> successfully.' %
>>>>>>>>>>>>> >>> (set_name))
>>>>>>>>>>>>> >>> + log.notice('------------------
>>>>>>>>>>>>> -----------------------------')
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def output_handler(self, text):
>>>>>>>>>>>>> >>> + log.notice('%s' % (text))
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +class coverage_run(object):
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + Coverage analysis support for rtems-test
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + def __init__(self, p_macros, coverage_arg, target):
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + Constructor
>>>>>>>>>>>>> >>> + '''
>>>>>>>>>>>>> >>> + self.macros = p_macros
>>>>>>>>>>>>> >>> + self.build_dir = self.macros['_cwd']
>>>>>>>>>>>>> >>> + self.explanations_txt =
>>>>>>>>>>>>> >>> self.macros.expand(self.macros['cov_explanations'])
>>>>>>>>>>>>> >>> + self.test_dir = path.join(self.build_dir,
>>>>>>>>>>>>> 'coverage')
>>>>>>>>>>>>> >>> + if (not path.exists(self.test_dir)):
>>>>>>>>>>>>> >>> + path.mkdir(self.test_dir)
>>>>>>>>>>>>> >>> + self.rtdir = path.abspath(self.macros['_rtdir'])
>>>>>>>>>>>>> >>> + self.rtscripts = self.macros.expand(self.macros
>>>>>>>>>>>>> ['_rtscripts'])
>>>>>>>>>>>>> >>> + self.coverage_config_path =
>>>>>>>>>>>>> path.join(self.rtscripts,
>>>>>>>>>>>>> >>> 'coverage')
>>>>>>>>>>>>> >>> + self.symbol_config_path =
>>>>>>>>>>>>> path.join(self.coverage_config_path,
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> 'symbol-sets.ini')
>>>>>>>>>>>>> >>> + self.symbol_select_path =
>>>>>>>>>>>>> path.join(self.coverage_config_path,
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> 'symbol-select.ini')
>>>>>>>>>>>>> >>> + self.executables = None
>>>>>>>>>>>>> >>> + self.symbol_sets = []
>>>>>>>>>>>>> >>> + self.no_clean = int(self.macros['_no_clean'])
>>>>>>>>>>>>> >>> + self.report_format =
>>>>>>>>>>>>> self.macros['cov_report_format']
>>>>>>>>>>>>> >>> + self.coverage_arg = coverage_arg
>>>>>>>>>>>>> >>> + self.target = target
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def run(self):
>>>>>>>>>>>>> >>> + try:
>>>>>>>>>>>>> >>> + if self.executables is None:
>>>>>>>>>>>>> >>> + raise error.general('no test executables
>>>>>>>>>>>>> provided.')
>>>>>>>>>>>>> >>> + build_dir = build_path_generator(self.exec
>>>>>>>>>>>>> utables,
>>>>>>>>>>>>> >>> self.target).run()
>>>>>>>>>>>>> >>> + parser = symbol_parser(self.symbol_conf
>>>>>>>>>>>>> ig_path,
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> self.symbol_select_path,
>>>>>>>>>>>>> >>> + self.coverage_arg,
>>>>>>>>>>>>> >>> + build_dir)
>>>>>>>>>>>>> >>> + parser.run()
>>>>>>>>>>>>> >>> + covoar_runner = covoar(self.test_dir,
>>>>>>>>>>>>> >>> self.symbol_select_path,
>>>>>>>>>>>>> >>> + self.executables,
>>>>>>>>>>>>> >>> self.explanations_txt)
>>>>>>>>>>>>> >>> + covoar_runner.run('score',
>>>>>>>>>>>>> self.symbol_select_path)
>>>>>>>>>>>>> >>> + self._generate_reports();
>>>>>>>>>>>>> >>> + self._summarize();
>>>>>>>>>>>>> >>> + finally:
>>>>>>>>>>>>> >>> + self._cleanup();
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _generate_reports(self):
>>>>>>>>>>>>> >>> + log.notice('Generating reports')
>>>>>>>>>>>>> >>> + if self.report_format == 'html':
>>>>>>>>>>>>> >>> + report = report_gen_html(self.symbol_sets,
>>>>>>>>>>>>> >>> + self.build_dir,
>>>>>>>>>>>>> >>> + self.rtdir)
>>>>>>>>>>>>> >>> + report.generate()
>>>>>>>>>>>>> >>> + report.add_covoar_src_path()
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _cleanup(self):
>>>>>>>>>>>>> >>> + if not self.no_clean:
>>>>>>>>>>>>> >>> + log.notice('***Cleaning tempfiles***')
>>>>>>>>>>>>> >>> + for exe in self.executables:
>>>>>>>>>>>>> >>> + trace_file = exe + '.cov'
>>>>>>>>>>>>> >>> + if path.exists(trace_file):
>>>>>>>>>>>>> >>> + os.remove(trace_file)
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> + def _summarize(self):
>>>>>>>>>>>>> >>> + log.notice('Coverage analysis finished. You can
>>>>>>>>>>>>> find results in
>>>>>>>>>>>>> >>> %s' % (self.build_dir))
>>>>>>>>>>>>> >>> diff --git a/tester/rt/test.py b/tester/rt/test.py
>>>>>>>>>>>>> >>> index f4d9b5c..84dff01 100644
>>>>>>>>>>>>> >>> --- a/tester/rt/test.py
>>>>>>>>>>>>> >>> +++ b/tester/rt/test.py
>>>>>>>>>>>>> >>> @@ -48,12 +48,14 @@ from rtemstoolkit import mailer
>>>>>>>>>>>>> >>> from rtemstoolkit import reraise
>>>>>>>>>>>>> >>> from rtemstoolkit import stacktraces
>>>>>>>>>>>>> >>> from rtemstoolkit import version
>>>>>>>>>>>>> >>> +from rtemstoolkit import check
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> from . import bsps
>>>>>>>>>>>>> >>> from . import config
>>>>>>>>>>>>> >>> from . import console
>>>>>>>>>>>>> >>> from . import options
>>>>>>>>>>>>> >>> from . import report
>>>>>>>>>>>>> >>> +from . import coverage
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> class log_capture(object):
>>>>>>>>>>>>> >>> def __init__(self):
>>>>>>>>>>>>> >>> @@ -147,7 +149,7 @@ class test_run(object):
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> def run(self):
>>>>>>>>>>>>> >>> self.thread = threading.Thread(target =
>>>>>>>>>>>>> self.runner,
>>>>>>>>>>>>> >>> - name = 'test[%s]' %
>>>>>>>>>>>>> >>> path.basename(self.executable))
>>>>>>>>>>>>> >>> + name = 'test[%s]' %
>>>>>>>>>>>>> >>> path.basename(self.executable))
>>>>>>>>>>>>> >>> self.thread.start()
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> def is_alive(self):
>>>>>>>>>>>>> >>> @@ -214,6 +216,10 @@ def killall(tests):
>>>>>>>>>>>>> >>> for test in tests:
>>>>>>>>>>>>> >>> test.kill()
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> +def coverage_run(opts, coverage, executables):
>>>>>>>>>>>>> >>> + coverage.executables = executables
>>>>>>>>>>>>> >>> + coverage.run()
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> def run(command_path = None):
>>>>>>>>>>>>> >>> import sys
>>>>>>>>>>>>> >>> tests = []
>>>>>>>>>>>>> >>> @@ -221,15 +227,16 @@ def run(command_path = None):
>>>>>>>>>>>>> >>> opts = None
>>>>>>>>>>>>> >>> default_exefilter = '*.exe'
>>>>>>>>>>>>> >>> try:
>>>>>>>>>>>>> >>> - optargs = { '--rtems-tools': 'The path to the
>>>>>>>>>>>>> RTEMS tools',
>>>>>>>>>>>>> >>> - '--rtems-bsp': 'The RTEMS BSP to
>>>>>>>>>>>>> run the test on',
>>>>>>>>>>>>> >>> - '--user-config': 'Path to your local
>>>>>>>>>>>>> user
>>>>>>>>>>>>> >>> configuration INI file',
>>>>>>>>>>>>> >>> - '--report-mode': 'Reporting modes,
>>>>>>>>>>>>> failures
>>>>>>>>>>>>> >>> (default),all,none',
>>>>>>>>>>>>> >>> - '--list-bsps': 'List the supported
>>>>>>>>>>>>> BSPs',
>>>>>>>>>>>>> >>> - '--debug-trace': 'Debug trace based
>>>>>>>>>>>>> on specific
>>>>>>>>>>>>> >>> flags',
>>>>>>>>>>>>> >>> - '--filter': 'Glob that
>>>>>>>>>>>>> executables must match
>>>>>>>>>>>>> >>> to run (default: ' +
>>>>>>>>>>>>> >>> + optargs = { '--rtems-tools': 'The path to the
>>>>>>>>>>>>> RTEMS tools',
>>>>>>>>>>>>> >>> + '--rtems-bsp': 'The RTEMS BSP to
>>>>>>>>>>>>> run the test
>>>>>>>>>>>>> >>> on',
>>>>>>>>>>>>> >>> + '--user-config': 'Path to your
>>>>>>>>>>>>> local user
>>>>>>>>>>>>> >>> configuration INI file',
>>>>>>>>>>>>> >>> + '--report-mode': 'Reporting modes,
>>>>>>>>>>>>> failures
>>>>>>>>>>>>> >>> (default),all,none',
>>>>>>>>>>>>> >>> + '--list-bsps': 'List the
>>>>>>>>>>>>> supported BSPs',
>>>>>>>>>>>>> >>> + '--debug-trace': 'Debug trace
>>>>>>>>>>>>> based on specific
>>>>>>>>>>>>> >>> flags',
>>>>>>>>>>>>> >>> + '--filter': 'Glob that
>>>>>>>>>>>>> executables must
>>>>>>>>>>>>> >>> match to run (default: ' +
>>>>>>>>>>>>> >>> default_exefilter + ')',
>>>>>>>>>>>>> >>> - '--stacktrace': 'Dump a stack trace
>>>>>>>>>>>>> on a user
>>>>>>>>>>>>> >>> termination (^C)' }
>>>>>>>>>>>>> >>> + '--stacktrace': 'Dump a stack
>>>>>>>>>>>>> trace on a user
>>>>>>>>>>>>> >>> termination (^C)',
>>>>>>>>>>>>> >>> + '--coverage': 'Perform coverage
>>>>>>>>>>>>> analysis of
>>>>>>>>>>>>> >>> test executables.'}
>>>>>>>>>>>>> >>> mailer.append_options(optargs)
>>>>>>>>>>>>> >>> opts = options.load(sys.argv,
>>>>>>>>>>>>> >>> optargs = optargs,
>>>>>>>>>>>>> >>> @@ -279,6 +286,15 @@ def run(command_path = None):
>>>>>>>>>>>>> >>> raise error.general('RTEMS BSP not provided
>>>>>>>>>>>>> or an invalid
>>>>>>>>>>>>> >>> option')
>>>>>>>>>>>>> >>> bsp = config.load(bsp[1], opts)
>>>>>>>>>>>>> >>> bsp_config = opts.defaults.expand(opts.defa
>>>>>>>>>>>>> ults['tester'])
>>>>>>>>>>>>> >>> + coverage_enabled = opts.find_arg('--coverage')
>>>>>>>>>>>>> >>> + if coverage_enabled:
>>>>>>>>>>>>> >>> + if len(coverage_enabled) == 2:
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >> Is this to check if sets have been provided to
>>>>>>>>>>>>> --coverage=score,sapi, that
>>>>>>>>>>>>> >> kind of thing? If so the variable name coverage_enabled
>>>>>>>>>>>>> doesn't make sense
>>>>>>>>>>>>> >> any more. Probably if symbol_sets and if len(symbol_sets)
>>>>>>>>>>>>> will make more
>>>>>>>>>>>>> >> sense for both cases.
>>>>>>>>>>>>> >
>>>>>>>>>>>>> > That's a good point.
>>>>>>>>>>>>> > How about changing it to just 'coverage' instead ?
>>>>>>>>>>>>> > Because it's still checking whether the option is given or
>>>>>>>>>>>>> > not. symbol_sets might create confusion.
>>>>>>>>>>>>> > Will that be OK ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> That name might collide with your class object (coverage)?
>>>>>>>>>>>>>
>>>>>>>>>>>> That's actually why I kept it as coverage_enabled.
>>>>>>>>>>>> I think we can go for coverage_option (?)
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >>> + coverage_runner =
>>>>>>>>>>>>> coverage.coverage_run(opts.defaults,
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> coverage_enabled[1],
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> opts.defaults['target'])
>>>>>>>>>>>>> >>> + else:
>>>>>>>>>>>>> >>> + coverage_runner =
>>>>>>>>>>>>> coverage.coverage_run(opts.defaults,
>>>>>>>>>>>>> >>> 0,
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> opts.defaults['target'])
>>>>>>>>>>>>> >>> report_mode = opts.find_arg('--report-mode')
>>>>>>>>>>>>> >>> if report_mode:
>>>>>>>>>>>>> >>> if report_mode[1] != 'failures' and \
>>>>>>>>>>>>> >>> @@ -365,6 +381,8 @@ def run(command_path = None):
>>>>>>>>>>>>> >>> reports.failures(),
>>>>>>>>>>>>> >>> 'Log', '===', ''] + output.get()
>>>>>>>>>>>>> >>> mail.send(to_addr, subject,
>>>>>>>>>>>>> os.linesep.join(body))
>>>>>>>>>>>>> >>> + if coverage_enabled:
>>>>>>>>>>>>> >>> + coverage_run(opts, coverage_runner,
>>>>>>>>>>>>> executables)
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> except error.general as gerr:
>>>>>>>>>>>>> >>> print(gerr)
>>>>>>>>>>>>> >>> diff --git a/tester/rtems/testing/bsps/leon3-qemu-cov.ini
>>>>>>>>>>>>> >>> b/tester/rtems/testing/bsps/leon3-qemu-cov.ini
>>>>>>>>>>>>> >>> index 6b5e7e6..2f89117 100644
>>>>>>>>>>>>> >>> --- a/tester/rtems/testing/bsps/leon3-qemu-cov.ini
>>>>>>>>>>>>> >>> +++ b/tester/rtems/testing/bsps/leon3-qemu-cov.ini
>>>>>>>>>>>>> >>> @@ -31,9 +31,10 @@
>>>>>>>>>>>>> >>> #
>>>>>>>>>>>>> >>> # The Leon 3 QEMU BSP
>>>>>>>>>>>>> >>> #
>>>>>>>>>>>>> >>> -[leon3-qemu]
>>>>>>>>>>>>> >>> +[leon3-qemu-cov]
>>>>>>>>>>>>> >>> bsp = leon3-qemu
>>>>>>>>>>>>> >>> arch = sparc
>>>>>>>>>>>>> >>> +target = sparc-rtems5
>>>>>>>>>>>>> >>> tester = %{_rtscripts}/qemu.cfg
>>>>>>>>>>>>> >>> bsp_qemu_opts = %{qemu_opts_base} -M leon3_generic
>>>>>>>>>>>>> >>> bsp_qemu_cov_opts = -exec-trace %{test_executable}.cov
>>>>>>>>>>>>> >>> diff --git a/tester/rtems/testing/coverage/symbol-sets.ini
>>>>>>>>>>>>> >>> b/tester/rtems/testing/coverage/symbol-sets.ini
>>>>>>>>>>>>> >>> new file mode 100644
>>>>>>>>>>>>> >>> index 0000000..a2ec7bc
>>>>>>>>>>>>> >>> --- /dev/null
>>>>>>>>>>>>> >>> +++ b/tester/rtems/testing/coverage/symbol-sets.ini
>>>>>>>>>>>>> >>> @@ -0,0 +1,36 @@
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# RTEMS Tools Project (http://www.rtems.org/)
>>>>>>>>>>>>> >>> +# Copyright 2018 Chris Johns (chrisj at rtems.org)
>>>>>>>>>>>>> >>> +# All rights reserved.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# This file is part of the RTEMS Tools package in
>>>>>>>>>>>>> 'rtems-tools'.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# Redistribution and use in source and binary forms, with
>>>>>>>>>>>>> or without
>>>>>>>>>>>>> >>> +# modification, are permitted provided that the following
>>>>>>>>>>>>> conditions are
>>>>>>>>>>>>> >>> met:
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# 1. Redistributions of source code must retain the above
>>>>>>>>>>>>> copyright
>>>>>>>>>>>>> >>> notice,
>>>>>>>>>>>>> >>> +# this list of conditions and the following disclaimer.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# 2. Redistributions in binary form must reproduce the
>>>>>>>>>>>>> above copyright
>>>>>>>>>>>>> >>> notice,
>>>>>>>>>>>>> >>> +# this list of conditions and the following disclaimer in
>>>>>>>>>>>>> the
>>>>>>>>>>>>> >>> documentation
>>>>>>>>>>>>> >>> +# and/or other materials provided with the distribution.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
>>>>>>>>>>>>> CONTRIBUTORS
>>>>>>>>>>>>> >>> "AS IS"
>>>>>>>>>>>>> >>> +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
>>>>>>>>>>>>> NOT LIMITED TO,
>>>>>>>>>>>>> >>> THE
>>>>>>>>>>>>> >>> +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
>>>>>>>>>>>>> PARTICULAR
>>>>>>>>>>>>> >>> PURPOSE
>>>>>>>>>>>>> >>> +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER
>>>>>>>>>>>>> OR CONTRIBUTORS
>>>>>>>>>>>>> >>> BE
>>>>>>>>>>>>> >>> +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
>>>>>>>>>>>>> EXEMPLARY, OR
>>>>>>>>>>>>> >>> +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
>>>>>>>>>>>>> PROCUREMENT OF
>>>>>>>>>>>>> >>> +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
>>>>>>>>>>>>> PROFITS; OR
>>>>>>>>>>>>> >>> BUSINESS
>>>>>>>>>>>>> >>> +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
>>>>>>>>>>>>> LIABILITY, WHETHER
>>>>>>>>>>>>> >>> IN
>>>>>>>>>>>>> >>> +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
>>>>>>>>>>>>> NEGLIGENCE OR
>>>>>>>>>>>>> >>> OTHERWISE)
>>>>>>>>>>>>> >>> +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
>>>>>>>>>>>>> EVEN IF ADVISED OF
>>>>>>>>>>>>> >>> THE
>>>>>>>>>>>>> >>> +# POSSIBILITY OF SUCH DAMAGE.
>>>>>>>>>>>>> >>> +#
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +[symbol-sets]
>>>>>>>>>>>>> >>> +sets = score,rtems
>>>>>>>>>>>>> >>> +
>>>>>>>>>>>>> >>> +[libraries]
>>>>>>>>>>>>> >>> +score = @BUILD-TARGET@/c/@BSP@/cpukit/score/libscore.a
>>>>>>>>>>>>> >>> +rtems = @BUILD-TARGET@/c/@BSP@/cpukit/rtems/librtems.a
>>>>>>>>>>>>> >>> diff --git a/tester/rtems/testing/qemu.cfg
>>>>>>>>>>>>> >>> b/tester/rtems/testing/qemu.cfg
>>>>>>>>>>>>> >>> index bfcd2f5..52a3752 100644
>>>>>>>>>>>>> >>> --- a/tester/rtems/testing/qemu.cfg
>>>>>>>>>>>>> >>> +++ b/tester/rtems/testing/qemu.cfg
>>>>>>>>>>>>> >>> @@ -51,8 +51,8 @@
>>>>>>>>>>>>> >>> #
>>>>>>>>>>>>> >>> # Qemu common option patterns.
>>>>>>>>>>>>> >>> #
>>>>>>>>>>>>> >>> -#%define qemu_opts_base -no-reboot -monitor none
>>>>>>>>>>>>> -serial stdio
>>>>>>>>>>>>> >>> -nographic
>>>>>>>>>>>>> >>> -%define qemu_opts_base -no-reboot -serial null -serial
>>>>>>>>>>>>> mon:stdio
>>>>>>>>>>>>> >>> -nographic
>>>>>>>>>>>>> >>> +%define qemu_opts_base -no-reboot -monitor none -serial
>>>>>>>>>>>>> stdio
>>>>>>>>>>>>> >>> -nographic
>>>>>>>>>>>>> >>> +#%define qemu_opts_base -no-reboot -serial null -serial
>>>>>>>>>>>>> mon:stdio
>>>>>>>>>>>>> >>> -nographic
>>>>>>>>>>>>> >>> %define qemu_opts_no_net -net none
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> #
>>>>>>>>>>>>> >>> --
>>>>>>>>>>>>> >>> 2.14.3
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> _______________________________________________
>>>>>>>>>>>>> >>> devel mailing list
>>>>>>>>>>>>> >>> devel at rtems.org
>>>>>>>>>>>>> >>> http://lists.rtems.org/mailman/listinfo/devel
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >
>>>>>>>>>>>>> >
>>>>>>>>>>>>> > _______________________________________________
>>>>>>>>>>>>> > devel mailing list
>>>>>>>>>>>>> > devel at rtems.org
>>>>>>>>>>>>> > http://lists.rtems.org/mailman/listinfo/devel
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> devel mailing list
>>>>>>> devel at rtems.org
>>>>>>> http://lists.rtems.org/mailman/listinfo/devel
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20180601/ccc7e42c/attachment-0002.html>
More information about the devel
mailing list