sparc/leon3 in git master?

[Sebastian Huber]

On 11/09/2018 21:25, Cudmore, Alan P. (GSFC-5820) wrote:
>
> Sorry for the false alarm, but I found out why it did not work.
>
> My leon3 BSP configure command had –enable-smp
>
> Once I removed that, it worked on both QEMU and TSIM-LEON3.
>

At least on Qemu it used to work with SMP enabled some time ago. With 
the latest Qemu the BSP starts (with SMP enabled), but the timecounter 
seems not to work:

qemu-system-sparc -no-reboot -nographic -M leon3_generic -m 64M -kernel 
./sparc-rtems5/c/leon3/testsuites/samples/ticker.exe


*** BEGIN OF TEST CLOCK TICK ***
*** TEST VERSION: 5.0.0.1fe1b820de02c274c2b2b3431340152734ee9fb6
*** TEST STATE: EXPECTED-PASS
*** TEST BUILD: RTEMS_NETWORKING RTEMS_POSIX_API RTEMS_SMP
*** TEST TOOLS: 7.3.0 20180125 (RTEMS 5, RSB 
9670d7541e0621915e521fe76e7bb33de8cee661, Newlib 
d13c84eb07e35984bf7a974cd786a6cdac29e6b9)
TA1  - rtems_clock_get_tod - 09:00:00   12/31/1988
TA2  - rtems_clock_get_tod - 09:00:00   12/31/1988
TA3  - rtems_clock_get_tod - 09:00:00   12/31/1988
TA1  - rtems_clock_get_tod - 09:00:00   12/31/1988
TA2  - rtems_clock_get_tod - 09:00:00   12/31/1988
TA1  - rtems_clock_get_tod - 09:00:00   12/31/1988

> The ut699 BSP worked as well.
>
> Does an SMP enabled kernel/bsp only work on a system where there are > 
> 1 cores?
>

A SMP enabled BSP should work also on systems with only one processor 
provided you use the right instruction set. I use for example the erc32 
BSP with SMP enabled all the time for RTEMS development.

> Thanks,
>
> Alan
>
> *From: *devel <devel-bounces at rtems.org> on behalf of Alan Cudmore 
> <alan.p.cudmore at nasa.gov>
> *Date: *Tuesday, September 11, 2018 at 3:01 PM
> *To: *"rtems-devel at rtems.org" <devel at rtems.org>
> *Subject: *sparc/leon3 in git master?
>
> I use RTEMS 4.11 on several leon3 targets, and I have been starting to 
> work with the git master to get ready for RTEMS 5.
>
> With 4.11, I can run ticker, hello, and other samples on TSIM2-LEON3, 
> QEMU with Jiri’s leon3 patches, or real Leon3 targets.
>
> When I run the ticker or hello for RTEMS 5 (RSB toolchain and RTEMS 
> built today) on QEMU or TSIM2 they immediately return with no output.
>
> I tried ticker for the sparc/erc32 BSP on SIS and it works.
>
> Before I start debugging, has anyone else used the generic Leon3 
> target on RTEMS 5 lately?
>
> Thanks,
>
> Alan
>
>
> _______________________________________________
> devel mailing list
> devel at rtems.org
> http://lists.rtems.org/mailman/listinfo/devel

-- 
Sebastian Huber, embedded brains GmbH

Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone   : +49 89 189 47 41-16
Fax     : +49 89 189 47 41-09
E-Mail  : sebastian.huber at embedded-brains.de
PGP     : Public key available on request.

Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.