[PATCH v2 8/8] misc/boot-image: Add a tool to create boot images.
chrisj at rtems.org
chrisj at rtems.org
Mon Jun 10 07:23:15 UTC 2019
From: Chris Johns <chrisj at rtems.org>
- FreeBSD support.
- MacOS support.
- Linux support.
- Support for 1st and 2nd loaders.
- Support uenv templates and uenv.txt support.
---
misc/rtems-boot-image | 42 ++
misc/tools/boot.py | 1092 ++++++++++++++++++++++++++++++++++
misc/tools/cmd-boot-image.py | 44 ++
misc/tools/rtems-boot.ini | 126 ++++
4 files changed, 1304 insertions(+)
create mode 100755 misc/rtems-boot-image
create mode 100644 misc/tools/boot.py
create mode 100755 misc/tools/cmd-boot-image.py
create mode 100644 misc/tools/rtems-boot.ini
diff --git a/misc/rtems-boot-image b/misc/rtems-boot-image
new file mode 100755
index 0000000..aa23b2e
--- /dev/null
+++ b/misc/rtems-boot-image
@@ -0,0 +1,42 @@
+#! /bin/sh
+#
+# RTEMS Tools Project (http://www.rtems.org/)
+# Copyright 2019 Chris Johns (chrisj at rtems.org)
+# All rights reserved.
+#
+# This file is part of the RTEMS Tools package in 'rtems-tools'.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+set -e
+base=$(dirname $(dirname $0))
+cmd=misc/tools/cmd-boot-image.py
+PYTHON_WRAPPER=rtemstoolkit/python-wrapper.sh
+if test -f ${base}/${PYTHON_WRAPPER}; then
+ PYTHON_CMD=${base}/${cmd}
+ . ${base}/${PYTHON_WRAPPER}
+elif test -f ${base}/share/rtems/${PYTHON_WRAPPER}; then
+ PYTHON_CMD=${base}/share/rtems/${cmd}
+ . ${base}/share/rtems/${PYTHON_WRAPPER}
+fi
+echo "error: RTEMS Toolkit python wrapper not found, please report"
diff --git a/misc/tools/boot.py b/misc/tools/boot.py
new file mode 100644
index 0000000..53253da
--- /dev/null
+++ b/misc/tools/boot.py
@@ -0,0 +1,1092 @@
+#
+# RTEMS Tools Project (http://www.rtems.org/)
+# Copyright 2019 Chris Johns (chrisj at rtems.org)
+# All rights reserved.
+#
+# This file is part of the RTEMS Tools package in 'rtems-tools'.
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+#
+# This code builds a bootloader image for an SD card for a range of
+# boards on a range of hosts.
+#
+
+from __future__ import print_function
+
+import argparse
+import copy
+import datetime
+import os
+import sys
+import tempfile
+
+from rtemstoolkit import check
+from rtemstoolkit import configuration
+from rtemstoolkit import error
+from rtemstoolkit import execute
+from rtemstoolkit import host
+from rtemstoolkit import log
+from rtemstoolkit import macros
+from rtemstoolkit import path
+from rtemstoolkit import version
+
+def _check_exes(exes):
+ ok = True
+ first = True
+ for exe in exes:
+ log.output('check exe: %s' % (exe))
+ if not check.check_exe(None, exe):
+ if first:
+ log.notice('Host executable(s) not found:')
+ first = False
+ log.notice(' %s' % (exe))
+ ok = False
+ return ok
+
+def _command(cmd, cwd):
+ e = execute.capture_execution()
+ cwd = path.abspath(cwd)
+ log.output('>> cwd: %s' % (cwd))
+ log.output('> %s' % (cmd))
+ exit_code, proc, output = e.shell(cmd, cwd = path.host(cwd))
+ log.output(['> ' + l for l in output.split(os.linesep)])
+ log.output('> exit: %d' % (exit_code))
+ if exit_code != 0:
+ err = 'executing failure: (exit:%d) %s' % (exit_code, cmd)
+ raise error.general(err)
+ return output
+
+ def si_units(self, units):
+ siunits = { 'k': 1024,
+ 'm': 1024 * 1024,
+ 'g': 1024 * 1024 * 1024 }
+ if units not in siunits:
+ raise error.general('invalid SI unit: %s' % (units))
+ return siunits[units]
+
+def _si_parse_size(size):
+ orig = size
+ units = 1
+ suffix = ''
+ if size[-1].isalpha():
+ suffix = size[-1]
+ if suffix not in ['k', 'm', 'g']:
+ err = 'invalid SI unit (k, m, g): %s: %s' % (suffix, size)
+ raise error.general(err)
+ units = { 'k': 1024,
+ 'm': 1024 * 1024,
+ 'g': 1024 * 1024 * 1024 }[suffix]
+ size = size[:-1]
+ if not size.isdigit():
+ raise error.general('invalid size: %s' % (orig))
+ size = int(size)
+ return size, suffix, size * units
+
+def _si_size(size):
+ si_s, si_u, size = _si_parse_size(size)
+ return size
+
+def _si_size_units(size):
+ si_s, si_u, size = _si_parse_size(size)
+ return si_s, si_u
+
+class config(object):
+
+ mandatory_configs = [
+ 'image_size',
+ 'part_type',
+ 'part_label',
+ 'fs_format',
+ 'fs_size',
+ 'fs_alignment',
+ 'tool_prefix',
+ 'bootloaders'
+ ]
+
+ def __init__(self, command_path, bootloader):
+ #
+ # Check if there is a defaults.mc file under the command path. If so
+ # this is the tester being run from within the git repo. If not found
+ # assume the tools have been installed and the defaults is in the
+ # install prefix.
+ #
+ boot_ini = 'tools/rtems-boot.ini'
+ if path.exists(path.join(command_path, boot_ini)):
+ rtdir = command_path
+ else:
+ rtdir = '%{_prefix}/share/rtems'
+ boot_ini = '%s/%s' % (rtdir, boot_ini)
+ self.build = 'build'
+ self.macros = macros.macros(rtdir = rtdir, show_minimal = True)
+ self.config = configuration.configuration(raw = False)
+ self.load_config(bootloader, boot_ini)
+ self.clean = True
+
+ def __getitem__(self, key):
+ if self.macros.has_key(key) and self.macros[key] != 'None':
+ r = self.macros.expand('%%{%s}' % (key))
+ if r == '1':
+ return True
+ elif r == '0':
+ return False
+ else:
+ return r
+ return None
+
+ def __setitem__(self, key, value):
+ if value is None:
+ value = 'None'
+ self.macros[key] = value
+
+ def get_mandatory_configs(self):
+ return self.mandatory_configs
+
+ def check_mandatory_configs(self):
+ for c in self.get_mandatory_configs():
+ if not self.macros.has_key(c):
+ raise error.general('boot config missing: %s' % (c))
+
+ def load_config(self, bootloader, config):
+ self.config.load(config)
+ #
+ # Check the config file has the basic data and structure.
+ #
+ bootloaders = self.config.comma_list('default', 'bootloaders')
+ for bl in bootloaders:
+ if not self.config.has_section(bl):
+ raise error.general('boot config: missing bootloader section: %s' % (bl))
+ for b in self.config.comma_list(bl, 'boards'):
+ if not self.config.has_section(b):
+ raise error.general('boot config: missing board section: %s' % (b))
+ #
+ # Is the bootloader valid?
+ #
+ if bootloader not in bootloaders:
+ raise error.general('boot config: unknown bootloader: %s' % (bootloader))
+ self.macros['bootloader'] = bootloader
+ self.macros['version_str'] = version.string()
+ self.macros['version'] = str(version.version())
+ self.macros['revision'] = str(version.revision())
+ if version.released():
+ self.macros['released'] = '1'
+ #
+ # Map the config to macros. The [default] section is global. The
+ # remaining sections are added as macro maps so the specalised
+ # bootloaders can enable reading from a macro map to provide specific
+ # values for a specific config such as a board.
+ #
+ for s in self.config.get_sections():
+ if s != 'default':
+ self.macros.set_write_map(s, add = True)
+ for i in self.config.get_items(s):
+ self.macros[i[0]] = i[1]
+ self.macros.unset_write_map()
+ self.macros.set_read_map('global')
+ self.macros.set_read_map(bootloader)
+
+ def section_macro_map(self, section, nesting_level = 0):
+ nesting_level += 1
+ if nesting_level >= 100:
+ err = 'boot config: too many map levels (looping?): %s' % (section)
+ raise error.general(err)
+ if section not in self.macros.maps():
+ raise error.general('boot config: maps section not found: %s' % (section))
+ self.macros.set_read_map(section)
+ for s in self.config.comma_list(section, 'uses', err = False):
+ self.section_macro_map(s, nesting_level)
+
+ def boards(self):
+ return self.config.comma_list(self['bootloader'], 'boards')
+
+ def log(self):
+ log.output('Configuration:')
+ log.output(' Bootloader: {0}'.format(self.macros['bootloader']))
+ log.output(' Image: {0}'.format(self.macros['output']))
+ log.output(' Image Size: {0}'.format(self.macros['image_size']))
+ log.output(' Part Type: {0}'.format(self.macros['part_type']))
+ log.output(' FS Format: {0}'.format(self.macros['fs_format']))
+ log.output(' FS Size: {0}'.format(self.macros['fs_size']))
+ log.output(' FS Align: {0}'.format(self.macros['fs_alignment']))
+ log.output(' Kernel: {0}'.format(self.macros['kernel']))
+ log.output(' Net Server IP: {0}'.format(self.macros['net_server_ip']))
+ log.output(' Net IP: {0}'.format(self.macros['net_ip']))
+ log.output(' Files: {0}'.format(len(self.files())))
+ log.output('Macros:')
+ macro_str = str(self.macros).split(os.linesep)
+ log.output(os.linesep.join([' ' + l for l in macro_str]))
+
+ def get_exes(self):
+ return []
+
+ def check_exes(self):
+ return _check_exes(self.get_exes())
+
+ def files(self):
+ return [f.strip() for f in self.comma_split(self['files']) if len(f) > 0]
+
+ def install_files(self, image, mountpoint):
+ pass
+
+ def install_configuration(self, image, mountpoint):
+ pass
+
+ def kernel_image(self):
+ return self['kernel_image'].replace('@KERNEL@', path.basename(self['kernel']))
+
+ def fdt_image(self):
+ return self['fdt_image'].replace('@FDT@', path.basename(self['fdt']))
+
+ def filter_text(self, lines):
+ out = []
+ for line in lines:
+ if '@KERNEL@' in line:
+ line = line.replace('@KERNEL@', path.basename(self['kernel']))
+ if '@KERNEL_IMAGE@' in line:
+ line = line.replace('@KERNEL_IMAGE@', self.kernel_image())
+ if '@FDT@' in line:
+ line = line.replace('@FDT@', path.basename(self['fdt']))
+ if '@FDT_IMAGE@' in line:
+ line = line.replace('@FDT_IMAGE@', self.fdt_image())
+ if '@NET_SERVER_IP@' in line:
+ line = line.replace('@NET_SERVER_IP@', self['net_server_ip'])
+ if '@NET_IP@' in line:
+ line = line.replace('@NET_IP@', self['net_ip'])
+ if '@NET_BOOTEXE@' in line:
+ line = line.replace('@NET_BOOTEXE@', self['net_bootexe'])
+ if '@NET_BOOTFDT@' in line:
+ line = line.replace('@NET_BOOTFDT@', self['fdt'])
+ out += [line]
+ return out
+
+ def comma_split(self, value):
+ if value is not None:
+ return [s.strip() for s in value.split(',')]
+ return []
+
+class uboot_config(config):
+
+ def __init__(self, command_path, convert_kernel, paths, board):
+ self.uboot = { 'paths': paths, 'board': board }
+ self.convert_kernel = convert_kernel
+ super(uboot_config, self).__init__(command_path, 'u-boot')
+ if self.board() not in self.boards():
+ raise error.general('board not found: %s' %(self.board()))
+ log.output('Board: %s' % (self.board()))
+ self.section_macro_map(self.board())
+ self.macros.set_read_map(self['bootloader'] + '-templates')
+ self.macros.lock_read_map()
+ log.output(str(self.macros))
+
+ def load_config(self, bootloader, config):
+ super(uboot_config, self).load_config(bootloader, config)
+ if not self.convert_kernel:
+ paths_count = len(self.uboot['paths'])
+ if paths_count == 1:
+ self.macros['ubootdir'] = path.abspath(self.uboot['paths'][0])
+ if not path.exists(self['first_stage']):
+ err = 'u-boot: first stage loader not found: %s' % \
+ (self['first_stage'])
+ raise error.general(err)
+ if not path.exists(self['second_stage']):
+ err = 'u-boot: second stage loader not found: %s' % \
+ (self['second_stage'])
+ raise error.general(err)
+ elif paths_count == 2:
+ self.macros['first_stage'] = self.uboot['paths'][0]
+ self.macros['second_stage'] = self.uboot['paths'][1]
+ else:
+ raise error.general('u-boot: invalid number of paths')
+ self.macros['mkimage'] = 'mkimage'
+
+ def get_mandatory_configs(self):
+ cfgs = super(uboot_config, self).get_mandatory_configs()
+ return cfgs + ['objcopy',
+ 'arch',
+ 'vendor',
+ 'board',
+ 'config_name',
+ 'first_stage',
+ 'second_stage',
+ 'kernel_converter']
+
+ def board(self):
+ return self.uboot['board']
+
+ def get_exes(self):
+ exes = super(uboot_config, self).get_exes()
+ if self['executables'] is not None:
+ exes += self.comma_split(self['executables'])
+ return exes
+
+ def install_files(self, image, mountpoint):
+ if self['kernel'] is not None:
+ kernel_image = self.kernel_convert(image, self['kernel'])
+ if self.convert_kernel:
+ path.copy(kernel_image, self['output'])
+ else:
+ image.install(kernel_image, mountpoint)
+ if self['fdt'] is not None:
+ fdt_image = self.fdt_convert(image, self['fdt'])
+ image.install(fdt_image, mountpoint)
+
+ def install_configuration(self, image, mountpoint):
+ uenv_txt = self['uenv_txt']
+ if uenv_txt is not None:
+ log.output('Uenv txt: %s' % (uenv_txt))
+ image.install(path.abspath(uenv_txt), mountpoint)
+ else:
+ template = None
+ if self['net_server_ip'] is not None or \
+ self['net_ip'] is not None:
+ if self['net_boot_ip'] is not None:
+ template = 'uenv_net_static'
+ else:
+ template = 'uenv_net_dhcp'
+ if self['net_fdt']:
+ template += '_net'
+ elif self['kernel'] is not None:
+ template = 'uenv_exe'
+ elif self['fdt'] is not None:
+ template = 'uenv'
+ if self['fdt'] is not None:
+ template += '_fdt'
+ if template is not None:
+ log.notice('Uenv template: %s' % (template))
+ uenv_start = self.comma_split(self['uenv_start'])
+ uenv_body = self.comma_split(self[template])
+ uenv_end = self.comma_split(self['uenv_end'])
+ uenv = uenv_start + uenv_body + uenv_end
+ image.install_text(self.filter_text(uenv),
+ path.join(mountpoint, self['boot_config']))
+
+ def kernel_convert(self, image, kernel):
+ dst = path.join(path.abspath(self['build']), path.basename(kernel))
+ self['kernel_build'] = dst
+ log.output('Copy (into build): %s -> %s' % (kernel, dst))
+ image.clean_path(dst)
+ path.copy(kernel, dst)
+ cmds = self.filter_text(self.comma_split(self['kernel_converter']))
+ for cmd in cmds:
+ _command(cmd, self['build'])
+ return self['kernel_image'].replace('@KERNEL@', dst)
+
+ def fdt_convert(self, image, fdt):
+ dst = path.join(path.abspath(self['build']), path.basename(fdt))
+ self['fdt_build'] = dst
+ log.output('Copy (into build): %s -> %s' % (fdt, dst))
+ image.clean_path(dst)
+ path.copy(fdt, dst)
+ return self['fdt_image'].replace('@FDT@', dst)
+
+class image(object):
+
+ def __init__(self, conf):
+ self.conf = conf
+ self.detach_images = []
+ self.unmount_paths = []
+ self.remove_paths = []
+
+ def build(self):
+ #
+ # Cleanup if any goes wrong.
+ #
+ try:
+ #
+ # Ge the absolute paths to fixed locations.
+ #
+ output = path.abspath(self.conf['output'])
+ build = path.abspath(self.conf['build'])
+ mountpoint = path.join(build, 'mnt')
+
+ #
+ # Create any paths we need. They are removed when this object is
+ # deleted.
+ #
+ self.create_path(build)
+
+ #
+ # If only coverting a kernel no need to create an image.
+ #
+ if not self.conf.convert_kernel:
+ self.create_path(mountpoint)
+
+ #
+ # Create the blank image file. This is attached as a device,
+ # partitioned, formatted and the files written to it.
+ #
+ log.notice('Create image: %s size %s' % (self.conf['output'],
+ self.conf['image_size']))
+ self.image_create(output, self.conf['image_size'])
+
+ #
+ # Attach the image so it is a device.
+ #
+ log.notice('Attach image to device: %s' % (self.conf['output']))
+ device = self.image_attach(output)
+
+ #
+ # Partition the image. The device may change.
+ #
+ log.notice('Partition device: %s as %s' % (device,
+ self.conf['part_type']))
+ device = self.partition(output,
+ device,
+ self.conf['part_type'],
+ self.conf['part_label'],
+ self.conf['fs_format'],
+ self.conf['fs_size'],
+ self.conf['fs_alignment'])
+ part = self.device_partition(device, 1)
+
+ #
+ # Format the first partition.
+ #
+ log.notice('Format: %s as %s' % (part, self.conf['fs_format']))
+ self.format_partition(part, self.conf['fs_format'])
+
+ #
+ # Mount the file system.
+ #
+ log.notice('Mount: %s' % (part))
+ self.mount(self.conf['fs_format'], part, mountpoint)
+
+ #
+ # Install the first stage and second stage boot loaders.
+ #
+ self.install(self.conf['first_stage'], mountpoint)
+ self.install(self.conf['second_stage'], mountpoint)
+
+ #
+ # Install the bootload files.
+ #
+ self.conf.install_files(self, mountpoint)
+
+ if not self.conf.convert_kernel:
+ #
+ # Install the bootloader configuration.
+ #
+ self.conf.install_configuration(self, mountpoint)
+
+ #
+ # Install any user files if present.
+ #
+ for f in self.conf.files():
+ self.install(f, mountpoint)
+
+ #
+ # Done.
+ #
+ log.notice('Finished')
+ finally:
+ self.cleanup()
+
+ def install(self, src, dst):
+ src_base = path.basename(src)
+ log.notice('Install: %s' % (src_base))
+ asrc = path.abspath(src)
+ adst = path.join(path.abspath(dst), src_base)
+ log.output('Copy: %s -> %s' % (asrc, adst))
+ path.copy(asrc, adst)
+
+ def install_text(self, text, dst):
+ dst_base = path.basename(dst)
+ log.notice('Install: %s' % (dst_base))
+ adst = path.abspath(dst)
+ log.output('Copy: text[%d] -> %s' % (len(text), adst))
+ log.output([' ] ' + l for l in text])
+ with open(adst, "w") as o:
+ o.write(os.linesep.join(text))
+
+ def image_create(self, path_, size):
+ self.host_image_create(path_, size, path.exists(path_))
+
+ def image_attach(self, path_):
+ device = self.host_image_attach(path_)
+ self.detach_images += [device]
+ return device
+
+ def image_detach(self, device):
+ if device in self.detach_images:
+ self.detach_images.remove(device)
+ self.host_image_detach(device)
+
+ def partition(self, image_, device, ptype, plabel, pformat, psize, palign):
+ return self.host_partition(image_, device,
+ ptype, plabel, pformat, psize, palign)
+
+ def format_partition(self, device, pformat):
+ self.host_format_partition(device, pformat)
+
+ def device_partition(self, device, pindex):
+ return self.host_device_partition(device, pindex)
+
+ def mount(self, pformat, device, path_):
+ if path_ not in self.unmount_paths:
+ self.host_mount(pformat, device, path_)
+ self.unmount_paths += [path_]
+
+ def unmount(self, path_):
+ if path_ in self.unmount_paths:
+ self.host_unmount(path_)
+ self.unmount_paths.remove(path_)
+
+ def cleanup(self):
+ log.notice('Cleaning up')
+ for m in self.unmount_paths:
+ log.output('unmount: %s' % (m))
+ self.unmount(m)
+ for i in self.detach_images:
+ log.output('detach: %s' % (i))
+ self.image_detach(i)
+ if self.conf.clean:
+ for r in self.remove_paths:
+ if path.exists(r):
+ log.output('remove: %s' % (r))
+ path.removeall(r)
+
+ def get_exes(self):
+ return ['dd']
+
+ def check_exes(self):
+ return _check_exes(self.get_exes())
+
+ def clean_path(self, name):
+ self.remove_paths += [name]
+
+ def create_path(self, where, recreate = True, cleanup = True):
+ if path.exists(where):
+ log.output('remove: %s' % (where))
+ path.removeall(where)
+ try:
+ log.output('make: %s' % (where))
+ path.mkdir(where)
+ except:
+ raise error.general('cannot create build path: %s' % (where))
+ if not path.isreadable(where):
+ raise error.general('build path is not readable: %s' % (where))
+ if not path.iswritable(where):
+ raise error.general('build path is not writeable: %s' % (where))
+ if cleanup:
+ self.remove_paths += [where]
+
+ def command(self, cmd):
+ return _command(cmd, self.conf['build'])
+
+ def host_image_create(self, path_, size, exists):
+ img_size, img_units = _si_size_units(size)
+ self.command('dd if=/dev/zero of=%s bs=1%s count=%d' % (path_,
+ img_units,
+ img_size))
+
+ def host_image_attach(self, path_):
+ raise error.general('no platform support: host_image_attach')
+
+ def host_image_detach(self, device):
+ raise error.general('no platform support: host_image_detach')
+
+ def host_partition(self, image_, device, ptype, plabel, pformat, psize, palign):
+ raise error.general('no platform support: host_partition')
+
+ def host_format_partition(self, device, pformat):
+ raise error.general('no platform support: host_format_partition')
+
+ def host_device_partition(self, device, pindex):
+ raise error.general('no platform support: host_device_partition')
+
+ def host_mount(self, pformat, device, path_):
+ raise error.general('no platform support: host_mount')
+
+ def host_unmount(self, path_):
+ raise error.general('no platform support: host_unmount')
+
+class freebsd_image(image):
+ def __init__(self, conf):
+ super(freebsd_image, self).__init__(conf)
+
+ def get_exes(self):
+ exes = super(freebsd_image, self).get_exes()
+ return exes + ['mdconfig',
+ 'gpart',
+ 'newfs_msdos',
+ 'mount',
+ 'umount']
+
+ def host_image_attach(self, path_):
+ return self.command('sudo mdconfig -f %s' % (path_))
+
+ def host_image_detach(self, device):
+ self.command('sudo mdconfig -d -u %s' % (device))
+
+ def host_partition(self, image_, device, ptype, plabel, pformat, psize, palign):
+ types = { 'MBR': 'MBR' }
+ formats = { 'fat16': 'fat16',
+ 'fat32': 'fat32' }
+ if ptype not in types:
+ err = 'unknown type of partitioning: %s' % (ptype)
+ raise error.general(err)
+ if pformat not in formats:
+ raise error.general('unknown format: %s' % (pformat))
+ self.command('sudo gpart create -s %s %s' % (types[ptype], device))
+ self.command('sudo gpart add -s %s -t %s -a %s %s' % (psize,
+ formats[pformat],
+ palign,
+ device))
+ self.command('sudo gpart set -a active -i 1 %s' % (device))
+ return device
+
+ def host_format_partition(self, device, pformat):
+ formats = { 'fat16': ('newfs_msdos', '16'),
+ 'fat32': ('newfs_msdos', '32') }
+ if pformat not in formats:
+ raise error.general('unknown format: %s' % (pformat))
+ self.command('sudo %s -F %s %s' % (formats[pformat][0],
+ formats[pformat][1],
+ device))
+
+ def host_device_partition(self, device, pindex):
+ return '/dev/%ss%d' % (device, pindex)
+
+ def host_mount(self, pformat, device, path_):
+ formats = { 'fat16': 'msdos',
+ 'fat32': 'msdos' }
+ if pformat not in formats:
+ raise error.general('unknown format: %s' % (pformat))
+ self.command('sudo mount -t %s %s %s' % (formats[pformat],
+ device,
+ path_))
+
+ def host_unmount(self, path_):
+ self.command('sudo umount %s' % (path_))
+
+class linux_image(image):
+ def __init__(self, conf):
+ super(linux_image, self).__init__(conf)
+
+ def get_exes(self):
+ exes = super(linux_image, self).get_exes()
+ return exes + ['losetup',
+ 'fdisk',
+ 'mkfs.fat',
+ 'mount',
+ 'umount']
+
+ def host_image_create(self, path_, size, exists):
+ img_size, img_units = _si_size_units(size)
+ self.command('dd if=/dev/zero of=%s bs=%s count=%d' % (path_,
+ _si_units(img_units),
+ img_size))
+ def host_image_attach(self, path_):
+ return self.command('sudo losetup --partscan --find --show %s' % (path_))
+
+ def host_image_detach(self, device):
+ self.command('sudo losetup --detach %s' % (device))
+
+ def host_partition(self, image_, device, ptype, pformat, psize, palign):
+ types = { 'MBR': 'MBR' }
+ formats = { 'fat16': '6',
+ 'fat32': 'b' }
+ if ptype not in types:
+ err = 'unknown type of partitioning: %s' % (ptype)
+ raise error.general(err)
+ if pformat not in formats:
+ raise error.general('unknown format: %s' % (pformat))
+ #
+ # Datch the loop back device, we use fdisk on the image to avoid any
+ # kernel errors related to re-reading the updated partition data.
+ #
+ self.host_image_detach(device)
+ #
+ # This awkward exchange is needed to script fdisk, hmmm.
+ #
+ with tempfile.NamedTemporaryFile() as tmp:
+ s = os.linesep.join(['o', # create a new empty part table
+ 'n', # add a new partition
+ 'p', # primary
+ '1', # partition 1
+ '%d' % (_si_size(palign) / 512),
+ '%d' % (_si_size(psize) / 512),
+ 't', # change a partition type
+ '%s' % (formats[pformat]), # hex code
+ 'a', # toggle a bootable flag
+ 'p', # print
+ 'w', # write table to disk and exit
+ ''])
+ log.output('fdisk script:')
+ log.output(s)
+ tmp.write(s.encode())
+ tmp.seek(0)
+ self.command('cat %s | fdisk -t %s %s' % (tmp.name,
+ types[ptype],
+ image_))
+ return self.host_image_attach(image_)
+
+ def host_format_partition(self, device, pformat):
+ formats = { 'fat16': ('mkfs.fat', '16'),
+ 'fat32': ('mkfs.fat', '32') }
+ if pformat not in formats:
+ raise error.general('unknown format: %s' % (pformat))
+ self.command('sudo %s -F %s %s' % (formats[pformat][0],
+ formats[pformat][1],
+ device))
+
+ def host_device_partition(self, device, pindex):
+ return '%sp%d' % (device, pindex)
+
+ def host_mount(self, pformat, device, path_):
+ options = { 'fat16': '-o uid=%d' % (os.getuid()),
+ 'fat32': '-o uid=%d' % (os.getuid()) }
+ if pformat in options:
+ opts = options[pformat]
+ else:
+ opts = ''
+ self.command('sudo mount %s %s %s' % (opts, device, path_))
+
+ def host_unmount(self, path_):
+ self.command('sudo umount %s' % (path_))
+
+class darwin_image(image):
+ def __init__(self, conf):
+ super(darwin_image, self).__init__(conf)
+ if not self.conf['output'].endswith('.img'):
+ log.notice('Output file does not end with `.img`. ' + \
+ 'Needed on MacOS due to a bug (Id: 51283993)')
+ raise error.general('output file does not end with `.img`')
+
+ def get_exes(self):
+ exes = super(darwin_image, self).get_exes()
+ return exes + ['hdiutil',
+ 'diskutil',
+ 'fdisk']
+
+ def host_image_attach(self, path_):
+ output = self.command('sudo hdiutil attach %s -nomount -nobrowse' % (path_))
+ if len(output.split(os.linesep)) != 1 or not output.startswith('/dev/'):
+ raise error.general('invalid hdiutil attach outputl; see log')
+ return output.strip()
+
+ def host_image_detach(self, device):
+ self.command('sudo hdiutil detach %s' % (device))
+
+ def host_partition(self, image_, device, ptype, plabel, pformat, psize, palign):
+ types = { 'MBR': 'MBR' }
+ formats = { 'fat16': 'MS-DOS FAT16',
+ 'fat32': 'MS-DOS FAT32' }
+ if ptype not in types:
+ err = 'unknown type of partitioning: %s' % (ptype)
+ raise error.general(err)
+ if pformat not in formats:
+ raise error.general('unknown format: %s' % (pformat))
+ #
+ # Align the parition by adding free space before. Sign.
+ #
+ cmd = "sudo diskutil partitionDisk %s 2 %s " % (device, types[ptype])
+ cmd += "'Free Space' '%%noformat%%' %s " % (palign)
+ cmd += "'%s' %s %s" % (formats[pformat], plabel, psize)
+ self.command(cmd)
+ #
+ # MacOS mounts the filesystem once the partitioning has finished,
+ # unmount it as we have no control over the mountpoint.
+ #
+ self.command('sudo diskutil unmountDisk %s' % (device))
+ #
+ # This awkward exchange is needed to set the active bit.
+ #
+ with tempfile.NamedTemporaryFile() as tmp:
+ s = os.linesep.join(['f 1', # flag toggle on partition 1
+ 'w', # write
+ 'p', # print
+ 'q', # quit
+ ''])
+ tmp.write(s.encode())
+ tmp.seek(0)
+ self.command('cat %s | sudo fdisk -y -e %s' % (tmp.name, device))
+ return device
+
+ def host_format_partition(self, device, pformat):
+ log.output(' * No format stage; done when partitioning')
+
+ def host_device_partition(self, device, pindex):
+ return '%ss%d' % (device, pindex)
+
+ def host_mount(self, pformat, device, path_):
+ self.command('sudo diskutil mount -mountPoint %s %s' % (path_, device))
+
+ def host_unmount(self, path_):
+ self.command('sudo diskutil unmount %s' % (path_))
+
+builders = {
+ 'freebsd': freebsd_image,
+ 'linux' : linux_image,
+ 'darwin' : darwin_image
+}
+
+def load_log(logfile):
+ log.default = log.log(streams = [logfile])
+
+def log_default():
+ return 'rtems-log-boot-image.txt'
+
+class valid_dir(argparse.Action):
+ def __call__(self, parser, namespace, values, option_string = None):
+ if type(values) is not list:
+ values = [values]
+ for value in values:
+ if not path.isdir(value):
+ raise argparse.ArgumentError(self,
+ 'is not a valid directory: %s' % (value))
+ if not path.isreadable(value):
+ raise argparse.ArgumentError(self, 'is not readable: %s' % (value))
+ if not path.iswritable(value):
+ raise argparse.ArgumentError(self, 'is not writeable: %s' % (value))
+ setattr(namespace, self.dest, value)
+
+class valid_file(argparse.Action):
+ def __call__(self, parser, namespace, value, option_string = None):
+ current = getattr(namespace, self.dest)
+ if not isinstance(current, list) and current is not None:
+ raise argparse.ArgumentError(self,
+ ' already provided: %s, have %s' % (value,
+ current))
+ if not path.isfile(value):
+ raise argparse.ArgumentError(self, 'is not a valid file: %s' % (value))
+ if not path.isreadable(value):
+ raise argparse.ArgumentError(self, 'is not readable: %s' % (value))
+ if current is not None:
+ value = current + [value]
+ setattr(namespace, self.dest, value)
+
+class valid_paths(argparse.Action):
+ def __call__(self, parser, namespace, value, option_string = None):
+ current = getattr(namespace, self.dest)
+ if current is None:
+ current = []
+ if isinstance(value, list):
+ values = value
+ else:
+ values = [values]
+ for value in values:
+ if not path.isfile(value) and not path.isdir(value):
+ err = 'is not a valid file or directory: %s' % (value)
+ raise argparse.ArgumentError(self, err)
+ if not path.isreadable(value):
+ raise argparse.ArgumentError(self, 'is not readable: %s' % (value))
+ current += [value]
+ setattr(namespace, self.dest, current)
+
+class valid_format(argparse.Action):
+ def __call__(self, parser, namespace, value, option_string = None):
+ current = getattr(namespace, self.dest)
+ if not isinstance(current, list) and current is not None:
+ raise argparse.ArgumentError(self,
+ ' already provided: %s, have %s' % (value,
+ current))
+ if value not in ['fat16', 'fat32']:
+ raise argparse.ArgumentError(self, ' invalid format: %s' % (value))
+ setattr(namespace, self.dest, value)
+
+class valid_si(argparse.Action):
+ def __call__(self, parser, namespace, value, option_string = None):
+ current = getattr(namespace, self.dest)
+ units = len(value)
+ if value[-1].isalpha():
+ if value[-1] not in ['k', 'm', 'g']:
+ raise argparse.ArgumentError(self,
+ 'invalid SI (k, m, g): %s' % (value[-1]))
+ units = -1
+ if not value[:units].isdigit():
+ raise argparse.ArgumentError(self, 'invalid SI size: %s' % (value))
+ setattr(namespace, self.dest, value)
+
+class valid_ip(argparse.Action):
+ def __call__(self, parser, namespace, value, option_string = None):
+ current = getattr(namespace, self.dest)
+ if current is not None:
+ raise argparse.ArgumentError(self,
+ ' already provided: %s, have %s' % (value,
+ current))
+ setattr(namespace, self.dest, value)
+
+def run(args = sys.argv, command_path = None):
+ ec = 0
+ notice = None
+ builder = None
+ try:
+ description = 'Provide one path to a u-boot build or provide two '
+ description += 'paths to the built the first and second stage loaders, '
+ description += 'for example a first stage loader is \'MLO\' and a second '
+ description += '\'u-boot.img\'.'
+
+ argsp = argparse.ArgumentParser(prog = 'rtems-boot-image',
+ description = description)
+ argsp.add_argument('-l', '--log',
+ help = 'log file (default: %(default)s).',
+ type = str, default = log_default())
+ argsp.add_argument('-v', '--trace',
+ help = 'enable trace logging for debugging.',
+ action = 'store_true')
+ argsp.add_argument('-s', '--image-size',
+ help = 'image size in mega-bytes (default: %(default)s).',
+ type = str, action = valid_si, default = '64m')
+ argsp.add_argument('-F', '--fs-format',
+ help = 'root file system format (default: %(default)s).',
+ type = str, action = valid_format, default = 'fat16')
+ argsp.add_argument('-S', '--fs-size',
+ help = 'root file system size in SI units ' + \
+ '(default: %(default)s).',
+ type = str, action = valid_si, default = 'auto')
+ argsp.add_argument('-A', '--fs-align',
+ help = 'root file system alignment in SI units ' + \
+ '(default: %(default)s).',
+ type = str, action = valid_si, default = '1m')
+ argsp.add_argument('-k', '--kernel',
+ help = 'install the kernel (default: %(default)r).',
+ type = str, action = valid_file, default = None)
+ argsp.add_argument('-d', '--fdt',
+ help = 'Flat device tree source/blob (default: %(default)r).',
+ type = str, action = valid_file, default = None)
+ argsp.add_argument('-f', '--file',
+ help = 'install the file (default: None).',
+ type = str, action = valid_file, default = [])
+ argsp.add_argument('--net-boot',
+ help = 'configure a network boot using TFTP ' + \
+ '(default: %(default)r).',
+ action = 'store_true')
+ argsp.add_argument('--net-boot-server',
+ help = 'network boot server IP address ' + \
+ '(default: %(default)r).',
+ type = str, action = valid_ip, default = None)
+ argsp.add_argument('--net-boot-ip',
+ help = 'network boot IP address (default: %(default)r).',
+ type = str, action = valid_ip, default = None)
+ argsp.add_argument('--net-boot-file',
+ help = 'network boot file (default: %(default)r).',
+ type = str, default = 'rtems.img')
+ argsp.add_argument('--net-boot-fdt',
+ help = 'network boot load a fdt file (default: %(default)r).',
+ action = 'store_true', default = False)
+ argsp.add_argument('-U', '--custom-uenv',
+ help = 'install the custom uEnv.txt file ' + \
+ '(default: %(default)r).',
+ type = str, action = valid_file, default = None)
+ argsp.add_argument('-b', '--board',
+ help = 'name of the board (default: %(default)r).',
+ type = str, required = True)
+ argsp.add_argument('--convert-kernel',
+ help = 'convert a kernel to a bootoader image ' + \
+ '(default: %(default)r).',
+ action = 'store_true', default = False)
+ argsp.add_argument('--no-clean',
+ help = 'do not clean when finished (default: %(default)r).',
+ action = 'store_false', default = True)
+ argsp.add_argument('-o', '--output',
+ help = 'image output file name',
+ type = str, required = True)
+ argsp.add_argument('paths',
+ help = 'files or paths, the number and type sets the mode.',
+ nargs = '+', action = valid_paths)
+
+ argopts = argsp.parse_args(args[1:])
+
+ load_log(argopts.log)
+ log.notice('RTEMS Tools - Boot Image, %s' % (version.string()))
+ log.output(log.info(args))
+ log.tracing = argopts.trace
+
+ if argopts.net_boot_server is not None or \
+ argopts.net_boot_ip is not None:
+ if argopts.convert_kernel:
+ raise error.general('net boot options not valid with kernel convert.')
+ if argopts.custom_uenv is not None:
+ raise error.general('cannot set custom uenv and net boot options.')
+
+ host.load()
+
+ log.output('Platform: %s' % (host.name))
+
+ conf = uboot_config(command_path,
+ argopts.convert_kernel,
+ argopts.paths,
+ argopts.board)
+
+ conf.check_mandatory_configs()
+
+ if conf.convert_kernel:
+ if argopts.kernel is not None:
+ raise error.general('kernel convert does not use the kernel option.')
+ if len(argopts.paths) != 1:
+ raise error.general('kernel convert take a single path.')
+ argopts.kernel = argopts.paths[0]
+ else:
+ conf.clean = argopts.no_clean
+
+ conf['board'] = argopts.board
+ conf['output'] = argopts.output
+ conf['net_server_ip'] = argopts.net_boot_server
+ conf['net_ip'] = argopts.net_boot_ip
+ conf['net_bootexe'] = argopts.net_boot_file
+ conf['net_fdt'] = '1' if argopts.net_boot_fdt else '0'
+ conf['build'] = 'build' # need an option for this at some point
+ conf['image_size'] = argopts.image_size
+ conf['fs_format'] = argopts.fs_format
+ conf['fs_size'] = argopts.fs_size
+ conf['fs_align'] = argopts.fs_align
+ conf['kernel'] = argopts.kernel
+ conf['fdt'] = argopts.fdt
+ conf['files'] = ','.join(argopts.file)
+ conf['uenv_txt'] = argopts.custom_uenv
+
+ conf.log()
+
+ if not conf.convert_kernel:
+ if conf['fs_size'] == 'auto':
+ conf['fs_size'] = \
+ str(_si_size(conf['image_size']) - _si_size(conf['fs_align']))
+ elif _si_size(conf['image_size']) > \
+ _si_size(conf['fs_align']) + _si_size(conf['fs_size']):
+ raise error.general('filesystem partition size larger than image size.')
+
+ if host.name not in builders:
+ err = 'no builder; platform not supported: %s' % (host.name)
+ raise error.general(err)
+
+ builder = builders[host.name](conf)
+
+ if not conf.check_exes() or not builder.check_exes():
+ raise error.general('command(s) not found; please fix.')
+
+ builder.build()
+
+ except error.general as gerr:
+ notice = str(gerr)
+ ec = 1
+ except error.internal as ierr:
+ notice = str(ierr)
+ ec = 1
+ except error.exit as eerr:
+ pass
+ except KeyboardInterrupt:
+ notice = 'abort: user terminated'
+ ec = 1
+ except:
+ raise
+ notice = 'abort: unknown error'
+ ec = 1
+ if builder is not None:
+ del builder
+ if notice is not None:
+ log.stderr(notice)
+ sys.exit(ec)
+
+if __name__ == "__main__":
+ run()
diff --git a/misc/tools/cmd-boot-image.py b/misc/tools/cmd-boot-image.py
new file mode 100755
index 0000000..f17a91e
--- /dev/null
+++ b/misc/tools/cmd-boot-image.py
@@ -0,0 +1,44 @@
+#
+# RTEMS Tools Project (http://www.rtems.org/)
+# Copyright 2019 Chris Johns (chrisj at rtems.org)
+# All rights reserved.
+#
+# This file is part of the RTEMS Tools package in 'rtems-tools'.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+from __future__ import print_function
+
+import sys, os
+
+base = os.path.dirname(os.path.dirname(os.path.abspath(sys.argv[0])))
+rtems = os.path.dirname(base)
+sys.path = [rtems] + sys.path
+
+try:
+ import boot
+ boot.run(sys.argv[1:], command_path = base)
+except ImportError:
+ print("Incorrect RTEMS Tools installation", file = sys.stderr)
+ sys.exit(1)
diff --git a/misc/tools/rtems-boot.ini b/misc/tools/rtems-boot.ini
new file mode 100644
index 0000000..26bc857
--- /dev/null
+++ b/misc/tools/rtems-boot.ini
@@ -0,0 +1,126 @@
+;
+; Bootloader Parameters
+;
+
+[default]
+image_size = 64m
+part_type = MBR
+part_label = RTEMS
+fs_format = fat16
+fs_size = 63m
+fs_alignment = 1m
+tool_prefix = %{arch}-rtems%{version}-
+objcopy = %{tool_prefix}objcopy
+bootloaders = u-boot
+
+[u-boot]
+boards = u-boot-beaglebone,
+ u-boot-zedboard
+bootdelay = 5
+mkimage = %{ubootdir}/tools/mkimage
+executables = cat, gzip, %{mkimage}, %{objcopy}
+fdt_compiler = ftc
+boot_config = uEnv.txt
+
+[u-boot-beaglebone]
+uses = u-boot-arm-ti-am335x_evm
+
+[u-boot-zedboard]
+uses = u-boot-arm-xilinx-zynq-common
+
+[u-boot-arm-ti-am335x_evm]
+arch = arm
+vendor = ti
+board = am335x
+config_name = am335x_evm
+first_stage = %{ubootdir}/MLO
+boot_device = mmc 0
+second_stage = %{ubootdir}/u-boot.img
+start_address = 0x80000000
+entry_address = 0x80000000
+kernel_loadaddr = 0x82000000
+fdt_loadaddr = 0x88000000
+kernel_converter = %{objcopy} @KERNEL@ -O binary @KERNEL at .bin,
+ cat @KERNEL at .bin | gzip -9 > @KERNEL at .gz,
+ %{mkimage} -A arm -O Linux -T kernel -a %{start_address}
+ -e %{entry_address} -n "RTEMS" -d @KERNEL at .gz @KERNEL at .img
+kernel_image = @KERNEL at .img
+fdt_image = @FDT@
+
+[u-boot-arm-xilinx-zynq-common]
+arch = arm
+vendor = xilinx
+board = zynq
+config_name = zynq-common
+first_stage = %{ubootdior}/spl/boot.bin
+second_state = %{ubootdir}/u-boot.img
+kernel_loadaddr = 0x02000000
+fdt_loadaddr = 0x08000000
+kernel_converter = %{objcopy} -R -S --strip-debug -O binary @KERNEL@ @KERNEL at .bin,
+ cat @KERNEL at .bin | gzip -9 @KERNEL at .gz
+kernel_image = @KERNEL at .img
+
+[u-boot-templates]
+uenv_start = setenv bootdelay %{bootdelay},
+ uenvcmd=run boot_rtems; reset;,
+ rtems_banner=echo "";
+ echo "RTEMS %{board} (%{arch}-%{vendor}-%{config_name})";
+ echo " rtems-boot-image v%{version_str}";
+ echo "";
+uenv_boot_exe = bootm %{kernel_loadaddr};
+uenv_boot_exe_fdt = bootm %{kernel_loadaddr} - %{fdt_loadaddr}
+uenv_exe_load = load %{boot_device} %{kernel_loadaddr} @KERNEL_IMAGE@
+uenv_fdt_load = echo "Loading @FDT_IMAGE@";
+ load %{boot_device} %{fdt_loadaddr} @FDT_IMAGE@
+uenv_tftp_exe = tftpboot %{kernel_loadaddr} @NET_BOOTEXE@
+uenv_tftp_fdt = tftpboot %{fdt_loadaddr} @NET_BOOTFDT@
+uenv_dhcp = echo "Netboot: DHCP";
+ echo " Server: @NET_SERVER_IP@";
+ set autoload no;
+ dhcp;
+ set serverip @NET_SERVER_IP@
+uenv_static_ip = echo "Netboot: STATIC";
+ echo " Server: @NET_SERVER_IP@";
+ echo " IP: @NET_IP@";
+ set autoload no;
+ set ipaddr @NET_IP@;
+ set serverip @NET_SERVER_IP@
+uenv_fdt = boot_rtems=run rtems_banner;
+ ${uenv_load_fdt}
+uenv_exe = boot_rtems=run rtems_banner;
+ echo "Loading @KERNEL_IMAGE@";
+ ${uenv_exe_load};
+ ${uenv_boot_exe}
+uenv_exe_fdt = boot_rtems=run rtems_banner;
+ echo "Loading @KERNEL_IMAGE@";
+ ${uenv_fdt_load};
+ ${uenv_fdt_load};
+ ${uenv_boot_exe_fdt}
+uenv_net_dhcp = boot_rtems=run rtems_banner;
+ ${uenv_dhcp};
+ ${uenv_tftp_exe};
+ ${uenv_boot_exe}
+uenv_net_dhcp_fdt = boot_rtems=run rtems_banner;
+ ${uenv_fdt_load};
+ ${uenv_dhcp};
+ ${uenv_tftp_exe};
+ ${uenv_boot_exe_fdt}
+uenv_net_dhcp_net_fdt = boot_rtems=run rtems_banner;
+ ${uenv_dhcp};
+ ${uenv_tftp_exe};
+ ${uenv_tftp_fdt};
+ ${uenv_boot_exe_fdt}
+uenv_net_static = boot_rtems=run rtems_banner;
+ ${uenv_static_ip};
+ ${uenv_tftp_exe};
+ ${uenv_boot_exe}
+uenv_net_static_fdt = boot_rtems=run rtems_banner;
+ ${uenv_fdt_load};
+ ${uenv_static_ip};
+ ${uenv_tftp_exe};
+ ${uenv_boot_exe_fdt}
+uenv_net_static_net_fdt = boot_rtems=run rtems_banner;
+ ${uenv_static_ip};
+ ${uenv_tftp_exe};
+ ${uenv_tftp_fdt};
+ ${uenv_boot_exe_fdt}
--
2.20.1 (Apple Git-117)
More information about the devel
mailing list