Stm32l4 contribution

[Ярослав Лещинский]

Hello again,

Due the email size limit I have splitted the first patch into the 4 peaces
and gonna send them in separate emails. After that 3 more patches will be
sent.

BRs, Yaroslav.

On Fri, 29 Mar 2019 at 11:50, Ярослав Лещинский <midniwalker at gmail.com>
wrote:

> The first one is rather big -- up to 777K. I have splitted them into 4
> peaces. May I send them in separate emails and after all add 3 patches more?
>
> On Fri, 29 Mar 2019 at 11:32, Chris Johns <chrisj at rtems.org> wrote:
>
>> Hi
>>
>> There’s a size limit. How big is the patch?
>>
>> Can you break it up?
>>
>> Chris
>>
>> On 29 Mar 2019, at 7:24 pm, Ярослав Лещинский <midniwalker at gmail.com>
>> wrote:
>>
>> Hello again,
>>
>> First of all sorry that I'm writing directly to you.
>>
>> I forwarded my previous email. When I tried send an email to
>> devel at rtems.org I've got message from bot that my email is waiting
>> approval from moderator -- I attached patches to the forwarded email as you
>> can see and email is out of size limit.
>>
>> I followed the instructions here:
>> https://devel.rtems.org/wiki/Developer/Git/Users#CreatingaPatch but it
>> looks like I missed something. I'll be really appreciate for your help.
>>
>> Thanks.
>>
>> BRs, Yaroslav.
>>
>>
>> ---------- Forwarded message ---------
>> From: Ярослав Лещинский <midniwalker at gmail.com>
>> Date: Fri, 29 Mar 2019 at 10:52
>> Subject: Re: Stm32l4 contribution
>> To: Chris Johns <chrisj at rtems.org>
>> Cc: devel at rtems.org <devel at rtems.org>
>>
>>
>> Hello Chris,
>>
>> I have sent patches from email notme9915 at gmail.com to devel at rtems.org as
>> mentioned here:
>> https://devel.rtems.org/wiki/Developer/Git/Users#CreatingaPatch
>>
>> In attached you can find those patches. I have added: startup code for
>> stm32l4, console, gpio, dma, spidev. According to spidev: I forgot to add
>> spi modes and config for baud rate: currently for stm32l4 dev board spi
>> mode is SPI_MODE_0 and BR is 500kHz.
>>
>> I'm assuming that after the code review I would fix some issues with my
>> code and at that moment I can add SPI modes and BR configuration.
>>
>> Spidev was tested with LoRa sx1278.
>>
>> Thanks.
>>
>> On Fri, 29 Mar 2019 at 06:08, Chris Johns <chrisj at rtems.org> wrote:
>>
>>> On 29/3/19 8:10 am, Ярослав Лещинский wrote:
>>> > Today I added some patches related to stm32l4 board support.
>>>
>>> Fantastic.
>>>
>>> > As it was the first
>>> > time when I’m dealing with a contribution here in RTEMS, could you
>>> please check:
>>> > does this patches existed at all? I sent them via git email, so I’m
>>> not sure
>>> > that I made all correct.
>>>
>>> Which address did you send them too?
>>>
>>> I have checked this list and there are no pending posts.
>>>
>>> Chris
>>>
>>
>>
>> --
>> --
>> Kind regards,
>> *Yaroslav Leshchinsky*
>>
>>
>> --
>> --
>> Kind regards,
>> *Yaroslav Leshchinsky*
>>
>> <0004-licences-description-added.patch>
>>
>> <0003-move-spidev-into-the-startup-code.patch>
>>
>> <0002-fixed-console-added-section-for-stm32l4-linker.patch>
>>
>> <0001-Add-stm32l476vg-discovery-board-support.patch>
>>
>>
>
> --
> --
> Kind regards,
> *Yaroslav Leshchinsky*
>


-- 
--
Kind regards,
*Yaroslav Leshchinsky*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20190329/90c5d77d/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Add-stm32l476vg-discovery-board-support-split00.patch
Type: text/x-patch
Size: 199680 bytes
Desc: not available
URL: <http://lists.rtems.org/pipermail/devel/attachments/20190329/90c5d77d/attachment-0002.bin>