Booting a rtems exe on Zynq UltraScale+ MPSoC ZCU106 board

[Chris Johns]

On 21/4/21 2:37 pm, Richi Dubey wrote:
> Cool, I tried building uboot for the board from this
> repo: https://github.com/Xilinx/u-boot-xlnx
> <https://github.com/Xilinx/u-boot-xlnx>, and the instructions for zcu106 are
> here: https://github.com/Xilinx/u-boot-xlnx/blob/master/doc/board/xilinx/zynqmp.rst
> <https://github.com/Xilinx/u-boot-xlnx/blob/master/doc/board/xilinx/zynqmp.rst>.
> But I tried a lot and could not find
> <https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads>
> anything like AArch32 or ARMv7. 

I suggest you download the Petalinx source bundle and see if you can find the
u-boot code in that. If you do send it to me off list and if suitable I will
upload to our ftp server.

It has become a bit of s trend of Xilinx to put the code into Petalinux and not
make it widely available or upstream. The PicoZed is the same.

Chris