PPP & TCP/IP Networking

[Matthew J Fletcher]

> To get your webserver in, you have to call rtems_initialize_webserver.

> Lacking that won't stop ping working though - it's done in the network

> stack.

the problem its that i get an undefined reference to
'rtems_initialize_webserver'
at link, i expected this because when i build rtmes the webserver
directory
is empty,
i.e it has not been linked into librtemsall.a.

I was hoping i had broken the config, ... is there a  spesific option to

enable the websever to be built into rtems ?

regards

---
Matthew J Fletcher
NPD Firmware
Serck Controls Ltd
---

**********************************************************************
Serck Controls Ltd, Rowley Drive, Coventry, CV3 4FH, UK
Tel: 44 (0) 24 7630 5050   Fax: 44 (0) 24 7630 2437
Web: www.serck-controls.co.uk  Admin: post at serck-controls.co.uk
**********************************************************************
This email and any files transmitted with it are confidential and 
intended solely for the use of the individual or entity to whom they 
are addressed. If you have received this email in error please notify 
the above.  Any views or opinions presented are solely those of the 
author and do not necessarily represent those of Serck Controls Ltd. 
Please note that Serck Controls Ltd is able to, and reserves the right 
to, monitor e-mail communications passing through its network. 
This email has been checked for viruses.  Serck Controls Ltd shall not 
be responsible for damage caused by any undetected virus. 
**********************************************************************