Cygwin host failure during configure...

[Silverio Diquigiovanni]

I have another problem...

After "configure" I launch "make all install" and so I would either
gensh1 & gensh2.

gensh1 is made without problems...
gensh2 throw an error during make phase...

I attach a screen capture flow...
Thank you for any suggestion

Regards,
Silverio Diquigiovanni


Making all in libcpu
make[4]: Entering directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-r
tems-01/sh-rtems/c/gensh2/lib/libcpu'
Making all in sh
make[5]: Entering directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-r
tems-01/sh-rtems/c/gensh2/lib/libcpu/sh'
Making all in sh7045
make[6]: Entering directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-r
tems-01/sh-rtems/c/gensh2/lib/libcpu/sh/sh7045'
Making all in include
make[7]: Entering directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-r
tems-01/sh-rtems/c/gensh2/lib/libcpu/sh/sh7045/include'
make[7]: *** No rule to make target `io_types.h', needed by
`../../../../../../.
./../gensh2/lib/include/sh/io_types.h'.  Stop.
make[7]: Leaving directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-rt
ems-01/sh-rtems/c/gensh2/lib/libcpu/sh/sh7045/include'
make[6]: *** [all-recursive] Error 1
make[6]: Leaving directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-rt
ems-01/sh-rtems/c/gensh2/lib/libcpu/sh/sh7045'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-rt
ems-01/sh-rtems/c/gensh2/lib/libcpu/sh'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-rt
ems-01/sh-rtems/c/gensh2/lib/libcpu'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-rt
ems-01/sh-rtems/c/gensh2/lib'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-rt
ems-01/sh-rtems/c/gensh2'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/build/sh-rt
ems-01/sh-rtems/c'
make: *** [all-recursive] Error 1

FYI I have this configure settings:

../../source/rtems-4.5.0/configure \
    --target=sh-rtems \
    --prefix=/home/SILVERIO_DIQUIGIOVANNI/rtems-4.5.0/sh-rtems-01/ \
    --disable-multiprocessing \
    --disable-posix \
    --disable-itron \
    --disable-networking \
    --disable-rdbg
    --disable-cxx \
    --disable-tests