Generic powerPC 750 BSP?
OUTWATER ~ KEITH J /5G3110
vac4050 at tueng.rsc.raytheon.com
Tue May 29 13:33:10 UTC 2001
Thanks for the info. My target doesn't have a monitor or a host bridge. The
interrupt controller is a custom design and the serial controller is a 16550
I was looking at the crt0.S from newlib's libgloss as a starting point for
start.S and libgloss's linker script as a strt for linkcmds.
> > Greetings all -
> > I would like to use RTEMS on an embedded powerPC 750. My target system is
> > really nothing more than a processor, memory and some IO (serial).
> > Is anyone currently doing something like this? If not, does anyone have any
> > advice regarding an appropriate start.S and linkcmds to base this BSP on?
> There is a port for MCP750 wich is a motorola CompacPCI board featuring
> a MPC750 (note the difference MCP750 (board name) and MPC750 (processor
> So anything that is cpu generic is already there. The most important
> difference should be the host bridge, irq handling, and serial IO.
> The boot part should be also diffrent and depend on the monitor you may
> have onbaord.
> / ` Eric Valette - Canon CRF
> /-- __ o _. Canon Development Europe Team Leader
> (___, / (_(_(__ Rue de la touche lambert
> 35517 Cesson-Sevigne Cedex
> Tel: +33 (0)2 99 87 68 91 Fax: +33 (0)2 99 84 11 30
> E-mail: valette at crf.canon.fr http://www.crf.canon.fr
More information about the users