interrupt question

[Stan]

Hi,

I use a board with 68k 16Mhz processor and a QUART ( 68C94 : 4 x uart).

The QUART provide a timer interrupt which call  rtems_clock_tick (interval : 5 mS).
Thus, I have four interrupts Rx  and one interrupt timer.

My application use Termios support ( buffer V24), .
It's running properly at 9600 baud but not at 19200 baud.


At 19200 baud, the RTS/CTS handshake is never switched and no datas are reading !
But nevertheless, the hanshake running properly at 9600...

How to solve this problem ?


Thanks a lot ( for previous answer also ;) )

Stan.










-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/users/attachments/20020315/79ddaff7/attachment.html>