Intel 82801BD PRO/100

[Eric Norum]

A quick look at the Linux eepro driver led me to beleive that I could use the 
RTEMS if_fxp.c driver for a machine with an Intel 82801BD PRO/100 network 
interface merely by adding the following line to the fxp_ident_table:
     { 0x103B,       "Intel Pro/100 Ethernet (82801BD PRO/100 VM (LOM))" }

It would appear that my guess was wrong.
The system starts up and prints
Ethernet address 0:8:2:3A:e9:E4
                                 PCI IDs: 0x8086 0x103B 0xE11 0x12 0x81
                                                                       Chip 
Type: 0

Then things lock up tight.

Has anyone had success with this NIC?
-- 
Eric Norum                                 norume at aps.anl.gov
Advanced Photon Source                     Phone: (630) 252-4793
Argonne National Laboratory