Filio example doesn't run with rtems from the cvs

[Thomas Doerfler (nt)]

matteo,

have a look at
rtems/make/Templates/Makefile.leaf

Thomas.

Matteo schrieb:
> Hi Thomas,
> the link is at the same file system.h that I use in the samples fileio that I
> try to run, so I think, isn't that the problem.
> May be, like you say, I have to adjust my make file but How I can add "the
> semaphore and message queue managers"?
> 
> Thanks in advance
> 
> MAtteo
> 
> Scrive Thomas Doerfler <Thomas.Doerfler at imd-systems.de>:
> 
> 
>>Matteo,
>>
>>have a look at:
>>
>>
> 
> http://www.rtems.com/cgi-bin/viewcvs.cgi/~checkout~/rtems/testsuites/samples/fileio/system.h?rev=1.6&content-type=text/plain
> 
>>you can see the proper things required in system.h, it is important, 
>>that the IDE and the ATA drivers are included (and the IDE driver is 
>>included before the ATA driver). You will also need the bdbuf 
>>configuration. I have seen in your makefile, that you do not include the 
>>semaphore and message queue managers. This might also cause problems, 
>>because the drivers will need message queues and semaphores.
>>
>>Thomas.
>>
>>Matteo wrote:
>>
>>>Hi Thomas,
>>>the makefile is ;
>>>
>>>#
>>>#  Makefile
>>>#
>>>
>>>#
>>>#  RTEMS_MAKEFILE_PATH is typically set in an environment variable
>>>#
>>>
>>>EXEC=fileio.exe
>>>PGM=${ARCH}/$(EXEC)
>>>
>>># optional managers required
>>>MANAGERS=io
>>>
>>># C source names
>>>CSRCS = init.c
>>>COBJS_ = $(CSRCS:.c=.o)
>>>COBJS = $(COBJS_:%=${ARCH}/%)
>>>
>>># C++ source names
>>>CXXSRCS =
>>>CXXOBJS_ = $(CXXSRCS:.cc=.o)
>>>CXXOBJS = $(CXXOBJS_:%=${ARCH}/%)
>>>
>>># AS source names
>>>ASSRCS =
>>>ASOBJS_ = $(ASSRCS:.s=.o)
>>>ASOBJS = $(ASOBJS_:%=${ARCH}/%)
>>>
>>># Libraries
>>>LIBS = -lrtemsall -lc
>>>
>>>include $(RTEMS_MAKEFILE_PATH)/Makefile.inc
>>>
>>>include $(RTEMS_CUSTOM)
>>>include $(PROJECT_ROOT)/make/leaf.cfg
>>>
>>>OBJS= $(COBJS) $(CXXOBJS) $(ASOBJS)
>>>
>>>all:    ${ARCH} $(PGM)
>>>
>>>$(PGM): $(OBJS)
>>>	$(make-exe)
>>>
>>>j:
>>>	@echo $(CFLAGS_DEBUG_V)
>>>	@echo $(RTEMS_USE_GCC272)
>>>
>>>
>>>in init.c is included the system.h.
>>>But I don't see "RTEMS_BSP_HAS_IDE_DRIVER", where and how should I use it
>>
>>?
>>
>>>To put like a "#define RTEMS_BSP_HAS_IDE_DRIVER" in system.h or to put it
>>>someway in the makefile ?
>>>
>>>Thanks in advance 
>>>
>>>Matteo
>>>
>>>
>>>Scrive Thomas Doerfler <Thomas.Doerfler at imd-systems.de>:
>>>
>>>
>>>
>>>>Matteo,
>>>>
>>>>what where your exact steps, when your compiled fileio separately? Which 
>>>>makefile did you use, did you also copy the "system.h" file? There is a 
>>>>BSP preprocessor define which is vital for "fileio", it is called 
>>>>"RTEMS_BSP_HAS_IDE_DRIVER".
>>>>
>>>>wkr,
>>>>Thomas.
>>>>
>>>>
>>>>Matteo wrote:
>>>>
>>>>
>>>>>Ok , I see from ftp://ftp.rtems.com/pub/rtems/4.6.99.2/TOOL_VERSIONS that
>>>>
>>>>I'm
>>>>
>>>>
>>>>>using a compatible version of gcc, newlib and binutils (gcc-4.0,
>>>>
>>>>newlib-1.13,
>>>>
>>>>
>>>>>binutils-2.16). 
>>>>>Infact using this toolset I can compile correctly rtems and the testsuite
>>>>
>>>>and
>>>>
>>>>
>>>>>fileio example works well. 
>>>>>After I take the source code of fileio example and I compiled it and the
>>>>
>>>>example
>>>>
>>>>
>>>>>doesn't works!
>>>>>How it's possible, I use the same source file, the only difference is
>>
>>that
>>
>>>>in
>>>>
>>>>
>>>>>the first case the example are compiled automatically with rtems and in
>>>>
>>>>the
>>>>
>>>>
>>>>>second case I compiled the source code of the example separately.
>>>>>Note that I try compile separately the hello and ticker examples  and
>>
>>they
>>
>>>>works
>>>>
>>>>
>>>>>well, so why fileio doesn't work ?
>>>>>
>>>>>
>>>>>Thank in advance 
>>>>>
>>>>>Matteo
>>>>>
>>>>
>>>>-- 
>>>>--------------------------------------------
>>>>IMD Ingenieurbuero fuer Microcomputertechnik
>>>>Thomas Doerfler           Herbststrasse 8
>>>>D-82178 Puchheim          Germany
>>>>email:    Thomas.Doerfler at imd-systems.de
>>>>PGP public key available at:
>>>>     http://www.imd-systems.de/pgpkey_en.html
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>-- 
>>--------------------------------------------
>>IMD Ingenieurbuero fuer Microcomputertechnik
>>Thomas Doerfler           Herbststrasse 8
>>D-82178 Puchheim          Germany
>>email:    Thomas.Doerfler at imd-systems.de
>>PGP public key available at:
>>      http://www.imd-systems.de/pgpkey_en.html
>>
>>
> 
> 
> 
> 


-- 
--------------------------------------------
IMD Ingenieurbuero fuer Microcomputertechnik
Thomas Doerfler           Herbststrasse 8
D-82178 Puchheim          Germany
email:    Thomas.Doerfler at imd-systems.de
PGP public key available at:
     http://www.imd-systems.de/pgpkey_en.html