Loading RTEMS on an MCP750

[Joel Sherrill]

Amalaye Oyake wrote:
> On the MCP750 I traditionally tip in (via serial link using the UNIX tip
> command) and I can change the board configuration ... After consultation I
> found out that I was staring at the VxWorks at the bootrom. Can I use the
> VxWorks bootrom to load RTEMs?
>
>   

I believe one of the RTEMS users has managed to do this but it wouldn't 
be me. :)
> If not, I think all need is to move a jumper to get back to PPCBug.
>
>   
The instructions are simpler and known if you do this.

If you are familiar with VxWorks monitor, then you might want to 
consider Till
Straumann's CEXP. 

--joel

> Regards,
>
> * Amalaye Oyake                                    *
> * Flight Software Applications & Data Product Mgmt */\
> * 818.393.7168 work   818.653.4748 cell            *||
> * Jet Propulsion Laboratory, Pasadena  CA 91109   */||\
>
> -----Original Message-----
> From: Joel Sherrill [mailto:joel.sherrill at oarcorp.com] 
> Sent: Wednesday, October 25, 2006 2:30 PM
> To: Amalaye Oyake
> Cc: rtems-users at rtems.com
> Subject: Re: Loading RTEMS on an MCP750
>
> Amalaye Oyake wrote:
>   
>> Hello,
>>
>>  
>>
>> I use a Motorola MCP 750 board. It was not entirely clear on how to 
>> load the OS onto the board. I presume there is some sort of bootloader 
>> utility.
>>
>>  
>>
>>     
> Does it have the Motorola PPCBug monitor?  The instructions in 
> c/src/lib/libbsp/powerpc/motorola_shared/README.MVME2300
> should be fairly close.
>
> But I would hope that one of the nice people out there with an MCP750 
> (Greg.. hint, hint..) can provide
> more specific instructions.
>
> --joel
>
>   
>> Thanks,
>>
>> * Amalaye Oyake                                    *
>> * Flight Software Applications & Data Product Mgmt */\
>> * 818.393.7168 work   818.653.4748 cell            *||
>> * Jet Propulsion Laboratory, Pasadena  CA 91109   */||\ 
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> rtems-users mailing list
>> rtems-users at rtems.com
>> http://rtems.rtems.org/mailman/listinfo/rtems-users
>>   
>>     
>
>
>
>