Does RTEMS support PXA320?

[Joel Sherrill]

Ray wrote:
> I believe that there are no xscale BSP. You may need to port a new of your own.
> You can refer the online document for help (BSP and porting guide). Xscale is similar to ARM and this may easy the development.
>
>   
I don't want to sound picky here but ...

it is not just similar to an ARM -- it is an ARM from
a specific vendor and with specific features.  That
makes it a CPU model within the ARM family. 

So it is a new BSP and possibly what we call "new in
family" which means you might have some tweaking
to do to code outside the BSP to handle a different
CPU core.

A port is to a new architecture entirely.  Think
mips versus powerpc versus arm. 

--joel
> ------------------
> Thanks & Best Regards!
> Ray
> 2007-08-01
>
> -------------------------------------------------------------
> From: Sang Won Yoo
> Date: 2007-08-01 08:00:47
> To:   Amalaye Oyake
> CC:   rtems-users at rtems.org
> Sub:  Re: Does RTEMS support PXA320?
>
>   
>>> Thanks for the response.
>>>       
>> I have tried to look for the thread, but I haven't.
>> Can anyone point me to the thread?
>>
>> Thanks in advance.
>>
>> SW Yoo
>>
>> On 7/31/07, Amalaye Oyake <amalaye.oyake at jpl.nasa.gov> wrote:
>>     
>>> This is one of the newer XScale processors (an ARM variant). RTEMS people
>>> -
>>> What is the status of the RTEMS XScale BSP? Can one simply use the ARM
>>> BSP?
>>>
>>> Can someone please list the general issues in getting an XScale BSP
>>> developed. I think there was a thread about this a while back if I
>>> remember.
>>>
>>> Sincerely,
>>> AO
>>>
>>> ________________________________________
>>> From: rtems-users-bounces+amalaye.oyake=jpl.nasa.gov at rtems.org
>>> [mailto:rtems-users-bounces+amalaye.oyake=jpl.nasa.gov at rtems.org] On
>>> Behalf
>>> Of Sang Won Yoo
>>> Sent: Tuesday, July 31, 2007 10:24 AM
>>> To: rtems-users at rtems.org
>>> Subject: Does RTEMS support PXA320?
>>>
>>> Hello RTEMS gurus,
>>>
>>> I am new to this list to start with RTEMS for my new project.
>>> The CPU on proejct has been determined to use PXA320. But not yet
>>> determined
>>> for RTOS.
>>>
>>> After Ireviewed several RTOS, RTEMS is good enough for the project. But I
>>> am wondering if RTEMS
>>> supports the CPU, PXA320 now. If so, please let me know where I can start
>>> with RTEMS.
>>>
>>> Thanks for your attention.
>>>
>>>
>>>
>>>
>>>       
>> _______________________________________________
>> rtems-users mailing list
>> rtems-users at rtems.com
>> http://rtems.rtems.org/mailman/listinfo/rtems-users
>>
>>     
>
>
> _______________________________________________
> rtems-users mailing list
> rtems-users at rtems.com
> http://rtems.rtems.org/mailman/listinfo/rtems-users
>