Error building gcc 4.2.1 for sparc target?

[mike]

Never mind. Found it. It was an older version of 'as'. Building
a newer version of binutils 2.17 for host fixed it.

mike wrote:
> Hi all,
>
> My host: Linux Redhat. Host tools: gcc 4.1.1
> Target : sparc-rtems
>
> I followed the documentation to build binutils 2.17 without any problem.
> When I tried to build gcc 4.2.1 (same errors for 4.1.1) for
> 'sparc-rtems' target following the doc,
> I got the following errors during "make all". I would really appreciate
> any pointers.
> Thank you.
> -mike-
>
>         gcc -c   -g -O2 -DIN_GCC -DCROSS_COMPILE  -W -Wall
> -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
> -Wold-style-definition -Wmissing-format-attribute    -DHAVE_CONFIG_H -I.
> -I. -I../../gcc-4.2.1/gcc -I../../gcc-4.2.1/gcc/.
> -I../../gcc-4.2.1/gcc/../include
> -I../../gcc-4.2.1/gcc/../libcpp/include
> -I../../gcc-4.2.1/gcc/../libdecnumber -I../libdecnumber
> -DSTANDARD_STARTFILE_PREFIX=\"../../../\"
> -DSTANDARD_EXEC_PREFIX=\"/opt/rtems-4.8.0-tools/lib/gcc/\"
> -DSTANDARD_LIBEXEC_PREFIX=\"/opt/rtems-4.8.0-tools/libexec/gcc/\"
> -DDEFAULT_TARGET_VERSION=\"4.2.1\"
> -DDEFAULT_TARGET_MACHINE=\"sparc-rtems\"
> -DSTANDARD_BINDIR_PREFIX=\"/opt/rtems-4.8.0-tools/bin/\"
> -DTOOLDIR_BASE_PREFIX=\"../../../../\"  `test "X${SHLIB_LINK}" = "X" ||
> test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` `test
> "X${SHLIB_MULTILIB}" = "X" || echo "-DNO_SHARED_LIBGCC_MULTILIB"` \
>                 -I. -I. -I../../gcc-4.2.1/gcc -I../../gcc-4.2.1/gcc/.
> -I../../gcc-4.2.1/gcc/../include
> -I../../gcc-4.2.1/gcc/../libcpp/include
> -I../../gcc-4.2.1/gcc/../libdecnumber -I../libdecnumber
> ../../gcc-4.2.1/gcc/cp/g++spec.c)
> /tmp/ccVxeQoU.s: Assembler messages:
> /tmp/ccVxeQoU.s:17: Error: Unknown opcode: `pushl'
> /tmp/ccVxeQoU.s:19: Error: Illegal operands
> /tmp/ccVxeQoU.s:22: Error: Unknown opcode: `xorl'
> /tmp/ccVxeQoU.s:23: Error: Unknown opcode: `leave'
> /tmp/ccVxeQoU.s:137: Error: Unknown opcode: `pushl'
> /tmp/ccVxeQoU.s:139: Error: Illegal operands
> /tmp/ccVxeQoU.s:141: Error: Unknown opcode: `pushl'
> /tmp/ccVxeQoU.s:143: Error: Unknown opcode: `pushl'
> /tmp/ccVxeQoU.s:145: Error: Unknown opcode: `pushl'
> /tmp/ccVxeQoU.s:147: Error: Unknown opcode: `subl'
> /tmp/ccVxeQoU.s:149: Error: Illegal operands
>
>
>
> _______________________________________________
> rtems-users mailing list
> rtems-users at rtems.com
> http://rtems.rtems.org/mailman/listinfo/rtems-users
>
>
>