Coldfire uC5282 Question

[Joel Sherrill]

Hi,

I am running gcc testsuite on the qemu uC5282
simulator.  I am getting a number of failures
where qemu says an illegal instruction was
encountered.  Can a coldfire person out there
tell me whether this is qemu not supporting
a valid coldfire instruction or this instruction
should not be generated by gcc with the -mcpu=5282
option

[joel at rtbf64b gcc]$ m68k-rtems4.10-objdump -da zero-struct-2.x7 | grep 
-i "51 ca"
[joel at rtbf64b gcc]$ m68k-rtems4.10-objdump -da zero-struct-2.x7 | grep 
-i "5186c"
    5186c:    51ca               sf %d2


$ uC5282 -i zero-struct-2.x7
/users/joel/qemu-coverage/install/bin/qemu-system-m68k is 
/users/joel/qemu-coverage/install/bin/qemu-system-m68k
qemu: fatal: Illegal instruction: 51ca @ 0005186c
D0 = 00000000   A0 = 00063b98   F0 = 0000000000000000 (           0)
D1 = 00000034   A1 = 00063186   F1 = 0000000000000000 (           0)
D2 = 00000000   A2 = 00063b98   F2 = 0000000000000000 (           0)
D3 = 000615e6   A3 = 00000000   F3 = 0000000000000000 (           0)
D4 = 00000034   A4 = 00000000   F4 = 0000000000000000 (           0)
D5 = 00000000   A5 = 00000000   F5 = 0000000000000000 (           0)
D6 = 00000000   A6 = 2000ffcc   F6 = 0000000000000000 (           0)
D7 = 00000000   A7 = 2000ffa0   F7 = 0000000000000000 (           0)
PC = 00051864   SR = 2700 ----- FPRESULT =            0
[joel at rtbf64b gcc]$ uC5282 zero-struct-2.x7^C

Thanks.

-- 
Joel Sherrill, Ph.D.             Director of Research&  Development
joel.sherrill at OARcorp.com        On-Line Applications Research
Ask me about RTEMS: a free RTOS  Huntsville AL 35805
    Support Available             (256) 722-9985