Problems in booting MVME2304

[Ziaulhaque Qazi]

Hi All

First of all thanks to Thomas and Joe. With your help I was able to go one step forward. However still I could not succeed in booting. I am pasting below what was the response this time.

After this the console was hung. Again I need your kind advice.

Thanks and Regards

Zia
_______________________________________________________________________________________________________________________________________________

PPC1-Bug>nbo
Network Booting from: DEC21140, Controller 0, Device 0
Device Name: /pci at 80000000/pci1011,9 at e,0:0,0
Loading: hello.ralf

Client IP Address      = 10.1.22.45
Server IP Address      = 10.1.22.49
Gateway IP Address     = 10.1.22.1
Subnet IP Address Mask = 255.255.255.0
Boot File Name         = hello.ralf
Argument File Name     =

Network Boot File load in progress... To abort hit <BREAK>
Bytes Received =&183040, Bytes Loaded =&183040
Bytes/Second   =&91520, Elapsed Time =2 Second(s)

Residual-Data Located at: $07F88000

Model: 000000000000000000000000000(e2)
Serial: MOT07C27F7
Processor/Bus frequencies (Hz): 333364800/66672376
Time Base Divisor: 4000
Memory Size: 8000000

PCI: Probing PCI hardware

RTEMS 4.x/PPC load:
Uncompressing the kernel...
done
Now booting...
Unknown motorola board Please update libbsp/powerpc/shared/motorola/motorola.c
cpu_type = E0
base_mod = F9
-----------------------------------------
Welcome to rtems-4.10.2(PowerPC/Generic (classic FPU)/mvme2304) on
Unknown motorola board
-----------------------------------------
idreg 0 = 0x48011057
OpenPIC found at C1000000.
pci : Interrupt routing not available for this bsp
Cleared PCI errors: pci_stat was 0x2280
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/users/attachments/20120328/497a9353/attachment.html>