BSP instructions

[Gedare Bloom]

I think EABI is preferred. I believe OABI is deprecated. In the near
future, arm-rtems4.11 should become EABI by default, if technical and
political problems can be resolved.

On Tue, Feb 19, 2013 at 1:20 PM, Pierre Ficheux
<pierre.ficheux at openwide.fr> wrote:
> AFAIK, EABI is much faster for floating point but should be OK with OABI toolchain.
>
> I'm very interested by the patch, could you send the diff by email (or put it on FTP or Github) ?
>
> regards
>
> ----- Mail original -----
>> De: "Alan P. Cudmore (GSFC-5820)" <alan.p.cudmore at nasa.gov>
>> À: "Pierre Ficheux" <pierre.ficheux at openwide.fr>, "Mathew Benson" <mathew.benson at gmail.com>, "Gedare Bloom"
>> <gedare at rtems.org>
>> Cc: "rtems-users at rtems.org List" <rtems-users at rtems.org>
>> Envoyé: Mardi 19 Février 2013 15:45:59
>> Objet: Re: BSP instructions
>>
>> My Raspberry Pi BSP is almost ready.. This weekend I was running a
>> few more tests and working on a README file for it.
>>
>> I can send out the diffs almost any time.
>>
>> I believe I am using the non-eabi toolchain: arm-rtems4.11-* Should I
>> use the rtemseabi, or does it matter right now?
>>
>> Alan
>>
>>
>>
>>
>>
>> On Feb 18, 2013, at 3:39 AM, Pierre Ficheux
>> <pierre.ficheux at openwide.fr> wrote:
>>
>> > Le 17/02/2013 21:11, Gedare Bloom a écrit :
>> >> Hi,
>> >>
>> >> For BSP development the best resource is the BSP and Device Driver
>> >> Guide [1]. It might be a little out-dated, especially with some of
>> >> the
>> >> ARM infrastructure which has undergone a lot of changes since
>> >> 4.10.
>> >>
>> >> The Raspberry Pi board will likely have a BSP soon. Alan Cudmore
>> >> has a
>> >> basic BSP working with a console and clock driver. You can contact
>> >> him
>> >> if you would like to try helping or to encourage a quicker release
>> >> :)
>> >>
>> >
>> > I there a way to take a look at the RPI BSP right now?
>> >
>> > regards
>> >
>> >
>> >> -Gedare
>> >>
>> >>
>> >
>> > --
>> > Pierre FICHEUX  -/- CTO OWI, France -\- pierre.ficheux at openwide.fr
>> >                                          http://ingenierie.openwide.fr
>> >                                          http://www.linuxembedded.fr
>> > I would love to change the world, but they won't give me the source
>> > code
>> >
>> >
>> > _______________________________________________
>> > rtems-users mailing list
>> > rtems-users at rtems.org
>> > http://www.rtems.org/mailman/listinfo/rtems-users
>>
>>
>
> --
> Pierre FICHEUX -/- CTO OW/OS4I, France -\- pierre.ficheux at openwide.fr
>                                          http://www.os4i.com
>                                          http://www.linuxembedded.fr
> I would love to change the world, but they won't give me the source code