BSP instructions

[Pierre Ficheux]

Of course yes but OABI is fine for a 1rst test.

----- Mail original -----
> De: "Gedare Bloom" <gedare at rtems.org>
> À: "Pierre Ficheux" <pierre.ficheux at openwide.fr>
> Cc: "Alan P. Cudmore (GSFC-5820)" <alan.p.cudmore at nasa.gov>, "rtems-users at rtems.org List" <rtems-users at rtems.org>,
> "Mathew Benson" <mathew.benson at gmail.com>
> Envoyé: Mardi 19 Février 2013 19:54:38
> Objet: Re: BSP instructions
> 
> I think EABI is preferred. I believe OABI is deprecated. In the near
> future, arm-rtems4.11 should become EABI by default, if technical and
> political problems can be resolved.
> 
> On Tue, Feb 19, 2013 at 1:20 PM, Pierre Ficheux
> <pierre.ficheux at openwide.fr> wrote:
> > AFAIK, EABI is much faster for floating point but should be OK with
> > OABI toolchain.
> >
> > I'm very interested by the patch, could you send the diff by email
> > (or put it on FTP or Github) ?
> >
> > regards
> >
> > ----- Mail original -----
> >> De: "Alan P. Cudmore (GSFC-5820)" <alan.p.cudmore at nasa.gov>
> >> À: "Pierre Ficheux" <pierre.ficheux at openwide.fr>, "Mathew Benson"
> >> <mathew.benson at gmail.com>, "Gedare Bloom"
> >> <gedare at rtems.org>
> >> Cc: "rtems-users at rtems.org List" <rtems-users at rtems.org>
> >> Envoyé: Mardi 19 Février 2013 15:45:59
> >> Objet: Re: BSP instructions
> >>
> >> My Raspberry Pi BSP is almost ready.. This weekend I was running a
> >> few more tests and working on a README file for it.
> >>
> >> I can send out the diffs almost any time.
> >>
> >> I believe I am using the non-eabi toolchain: arm-rtems4.11-*
> >> Should I
> >> use the rtemseabi, or does it matter right now?
> >>
> >> Alan
> >>
> >>
> >>
> >>
> >>
> >> On Feb 18, 2013, at 3:39 AM, Pierre Ficheux
> >> <pierre.ficheux at openwide.fr> wrote:
> >>
> >> > Le 17/02/2013 21:11, Gedare Bloom a écrit :
> >> >> Hi,
> >> >>
> >> >> For BSP development the best resource is the BSP and Device
> >> >> Driver
> >> >> Guide [1]. It might be a little out-dated, especially with some
> >> >> of
> >> >> the
> >> >> ARM infrastructure which has undergone a lot of changes since
> >> >> 4.10.
> >> >>
> >> >> The Raspberry Pi board will likely have a BSP soon. Alan
> >> >> Cudmore
> >> >> has a
> >> >> basic BSP working with a console and clock driver. You can
> >> >> contact
> >> >> him
> >> >> if you would like to try helping or to encourage a quicker
> >> >> release
> >> >> :)
> >> >>
> >> >
> >> > I there a way to take a look at the RPI BSP right now?
> >> >
> >> > regards
> >> >
> >> >
> >> >> -Gedare
> >> >>
> >> >>
> >> >
> >> > --
> >> > Pierre FICHEUX  -/- CTO OWI, France -\-
> >> > pierre.ficheux at openwide.fr
> >> >                                          http://ingenierie.openwide.fr
> >> >                                          http://www.linuxembedded.fr
> >> > I would love to change the world, but they won't give me the
> >> > source
> >> > code
> >> >
> >> >
> >> > _______________________________________________
> >> > rtems-users mailing list
> >> > rtems-users at rtems.org
> >> > http://www.rtems.org/mailman/listinfo/rtems-users
> >>
> >>
> >
> > --
> > Pierre FICHEUX -/- CTO OW/OS4I, France -\-
> > pierre.ficheux at openwide.fr
> >                                          http://www.os4i.com
> >                                          http://www.linuxembedded.fr
> > I would love to change the world, but they won't give me the source
> > code
> 

-- 
Pierre FICHEUX -/- CTO OW/OS4I, France -\- pierre.ficheux at openwide.fr
                                         http://www.os4i.com
                                         http://www.linuxembedded.fr
I would love to change the world, but they won't give me the source code