RTEMS 4.11/4.12 status on e500 targets

[Sebastian Huber]

Hello Eric,

I would use the Git master. You must boot RTEMS via U-Boot as a Linux image:

https://git.rtems.org/rtems/tree/c/src/lib/libbsp/powerpc/qoriq/README

It tested the P2020 using this board (qoriq_p1020rdb BSP):

https://www.artesyn.com/computing/products/product/mvme2500-series-vme64-processor-board

On 18/10/16 13:47, Eric Lighthart wrote:
> RTEMS folk--
>
> I'm having a little trouble getting through RTEMS early initialization 
> on a P2020-based target. I hang/crash during TLB (re-)initialization 
> in ...powerpc/qoriq/start/start.S after entering from U-Boot.
>
> I'm curious to know the status of RTEMS on other e500 targets. The 
> P1020RDB is probably the closest to my particular board, among those 
> named in the qoriq BSP.
>
> Can anyone vouch for the current 4.11 or 4.12 HEAD builds on P1020RDB? 
> (I don't have one to make this test myself; just my "similar" board.)
>
> Thanks for any info.
>
>                    -- Eric Lighthart
>
>
> _______________________________________________
> users mailing list
> users at rtems.org
> http://lists.rtems.org/mailman/listinfo/users

-- 
Sebastian Huber, embedded brains GmbH

Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone   : +49 89 189 47 41-16
Fax     : +49 89 189 47 41-09
E-Mail  : sebastian.huber at embedded-brains.de
PGP     : Public key available on request.

Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.