LibBSD | INTRNG: Add support for INTRNG on aarch64 (!133)

[Chris Johns (@chris)]

Chris Johns commented on a discussion: https://gitlab.rtems.org/rtems/pkg/rtems-libbsd/-/merge_requests/133#note_151086


How did you configure the test in net-services?

I cannot get that test to have a valid IP address on `cgem0` so I am wondering how you managed to get to a point it crashed as indicated?

I have:

```
NET_CFG_IFACE = cgem0
NET_CFG_BOOT_PROT = static
NET_CFG_SELF_IP = 10.10.5.45
NET_CFG_NETMASK = 255.255.255.0
NET_CFG_GATEWAY_IP = 10.10.5.1
NET_CFG_DOMAINNAME = contemporary.net.au
NET_CFG_DNS_IP = 10.10.10.1
NET_CFG_NTP_IP = 10.10.10.1
```

and all I get is:

```
SHLL [/] # ifconfig
cgem0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80008<VLAN_MTU,LINKSTATE>
        ether 52:54:00:12:34:56
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
cgem1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80008<VLAN_MTU,LINKSTATE>
        ether 52:54:00:12:34:57
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
cgem2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80008<VLAN_MTU,LINKSTATE>
        ether 52:54:00:12:34:58
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
cgem3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80008<VLAN_MTU,LINKSTATE>
        ether 52:54:00:12:34:59
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xffffff00
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
```

Is there something wrong in the configuration of tests in net-services?

-- 
View it on GitLab: https://gitlab.rtems.org/rtems/pkg/rtems-libbsd/-/merge_requests/133#note_151086
You're receiving this email because of your account on gitlab.rtems.org.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/bugs/attachments/20260527/b480a252/attachment-0001.htm>