error while running rtems-test with coverage

Vijay Kumar Banerjee vijaykumar9597 at gmail.com
Fri Apr 13 18:16:55 UTC 2018 

It just shows this.(with only hello)

Running covoar for score
WARNING: Unable to read coverage file
/home/lunatic/development/rtems/kernel/leon3/sparc-rtems5/c/leon3/testsuites/samples/hello/hello.exe.cov
ERROR: No information to analyze
***Cleaning tempfiles***
error: covoar failure exit code: 1

........................
The log file shows this
......................
RTEMS Testing - Tester, 5 (58acb6d61ac7 modified)
  2  Command Line:
/home/lunatic/development/rtems/test/rtems-tools/tester/rtems-test
--rtems-t    ools=/home/lunatic/development/rtems/5
--log=coverage_analysis.log --rtems-bsp=leon3_qemu -    -coverage
--rtems-builddir=/home/lunatic/development/rtems/kernel/leon3
sparc-rtems5/c/leon    3/testsuites/samples/hello
  3  Python: 2.7.14 (default, Feb 27 2018, 20:43:24) [GCC 7.3.1 20180130
(Red Hat 7.3.1-2)]
  4 Host: Linux-4.15.8-300.fc27.x86_64-x86_64-with-fedora-27-Twenty_Seven
(Linux lunatic 4.15.8    -300.fc27.x86_64 #1 SMP Fri Mar 9 18:11:36 UTC
2018 x86_64 x86_64)
  5 Coverage environment prepared
  6 [1/1] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3_qemu: hello.exe
  7
  8 Passed:        1
  9 Failed:        0
 10 User Input:    0
 11 Expected Fail: 0
 12 Indeterminate: 0
 13 Benchmark:     0
 14 Timeout:       0
 15 Invalid:       0
 16 Wrong Version: 0
 17 Wrong Build:   0
 18 Wrong Tools:   0
 19 ----------------
 20 Total:         1
 21
 22 Average test time: 0:00:01.505199
 23 Testing time     : 0:00:01.505199
 24 Running covoar for score
 25 shell: covoar -s /home/lunatic/coverage_test/coverage/score.symcfg -O
/home/lunatic/coverag    e_test/test/score -f QEMU -T sparc-rtems5 -E
/home/lunatic/development/rtems/test/rtems-too
ls/tester/rtems/testing/coverage/Explanations.txt -c .cov -e exe -p RTEMS-5
/home/lunatic/d
evelopment/rtems/kernel/leon3/sparc-rtems5/c/leon3/testsuites/samples/hello/hello.exe
 26 WARNING: Unable to read coverage file
/home/lunatic/development/rtems/kernel/leon3/sparc-rt
ems5/c/leon3/testsuites/samples/hello/hello.exe.cov

 1,1           Top


-- vijay

On 13 April 2018 at 23:40, Cillian O'Donnell <cpodonnell8 at gmail.com> wrote:

> Is there anywhere in that output that it shows the qemu command that is
> running?
>
> On Fri, 13 Apr 2018, 19:02 Vijay Kumar Banerjee, <vijaykumar9597 at gmail.com>
> wrote:
>
>>
>> -- vijay
>>
>> On 13 April 2018 at 23:29, Cillian O'Donnell <cpodonnell8 at gmail.com>
>> wrote:
>>
>>> I can't say for certain but I don't think that will be visible to
>>> qemu.cfg unless it's a global variable. Chris might know off the top of his
>>> head.
>>>
>>> On Fri, 13 Apr 2018, 18:51 Vijay Kumar Banerjee, <
>>> vijaykumar9597 at gmail.com> wrote:
>>>
>>>> can we set it in [coverage] ?
>>>>
>>>> It runs with the same warnings of unable to read the .cov files
>>
>>
>>> -- vijay
>>>>
>>>> On 13 April 2018 at 23:15, Cillian O'Donnell <cpodonnell8 at gmail.com>
>>>> wrote:
>>>>
>>>>> Alright so we're back to ini update stuff. That error is because in
>>>>> the old leon3-qemu.mc we had this global variable set. So you need to
>>>>> find out how to get that global variable set in the new leon3-qemu.ini
>>>>>
>>>>> Heres the old version from the .MC file
>>>>>
>>>>> [global]
>>>>> bsp:                      none,    none,     'leon3'
>>>>> coverage_supported:       none,    none,     '1'
>>>>>
>>>>>
>>>>> On Fri, 13 Apr 2018, 18:29 Vijay Kumar Banerjee, <
>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>
>>>>>> It shows the following error
>>>>>>
>>>>>> .......
>>>>>> RTEMS Testing - Tester, 5 (58acb6d61ac7 modified)
>>>>>> Coverage environment prepared
>>>>>> [ 3/13] p:0  f:0  u:0  e:0  I:0  B:0  t:0  i:0  W:0  |
>>>>>> sparc/leon3_qemu: cdtest.exe
>>>>>> [ 1/13] p:0  f:0  u:0  e:0  I:0  B:0  t:0  i:0  W:0  |
>>>>>> sparc/leon3_qemu: base_sp.exe
>>>>>> [ 2/13] p:0  f:0  u:0  e:0  I:0  B:0  t:0  i:0  W:0  |
>>>>>> sparc/leon3_qemu: capture.exe
>>>>>> [ 4/13] p:0  f:0  u:0  e:0  I:0  B:0  t:0  i:0  W:0  |
>>>>>> sparc/leon3_qemu: fileio.exe
>>>>>> error: qemu.cfg:77: macro '%{coverage_supported}' not found
>>>>>> warning: switched to dry run due to errors
>>>>>> error: qemu.cfg:77: invalid if bool value:  %if %{coverage_supported}
>>>>>> error: qemu.cfg:77: macro '%{coverage_supported}' not found
>>>>>> warning: switched to dry run due to errors
>>>>>> error: qemu.cfg:77: invalid if bool value:  %if %{coverage_supported}
>>>>>> Traceback (most recent call last):
>>>>>>   File "/home/lunatic/development/rtems/test/rtems-tools/tester/rtems-test",
>>>>>> line 40, in <module>
>>>>>>     rt.test.run()
>>>>>>   File "/home/lunatic/development/rtems/test/rtems-tools/tester/rt/test.py",
>>>>>> line 353, in run
>>>>>>     tst.reraise()
>>>>>>   File "/home/lunatic/development/rtems/test/rtems-tools/tester/rt/test.py",
>>>>>> line 160, in reraise
>>>>>>     _test_reraise(*self.result)
>>>>>> NameError: global name '_test_reraise' is not defined
>>>>>> error: qemu.cfg:77: macro '%{coverage_supported}' not found
>>>>>> warning: switched to dry run due to errors
>>>>>> error: qemu.cfg:77: invalid if bool value:  %if %{coverage_supported}
>>>>>> error: qemu.cfg:77: macro '%{coverage_supported}' not found
>>>>>> warning: switched to dry run due to errors
>>>>>> error: qemu.cfg:77: invalid if bool value:  %if %{coverage_supported}
>>>>>>
>>>>>>
>>>>>>
>>>>>> -- vijay
>>>>>>
>>>>>> On 13 April 2018 at 22:54, Cillian O'Donnell <cpodonnell8 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Ah yes, your missing the qemu arguments to run the coverage. Try this
>>>>>>>
>>>>>>> #
>>>>>>> # Coverage analysis
>>>>>>> #
>>>>>>> %define coverage_arg %{nil}
>>>>>>> %if %{defined _coverage}
>>>>>>>     %if %{coverage_supported}
>>>>>>>         %define coverage_arg -exec-trace %{test_executable}.cov
>>>>>>>     %else
>>>>>>>         %error "Coverage analysis unsupported for %{bsp}"
>>>>>>>     %endif
>>>>>>> %endif
>>>>>>>
>>>>>>> #
>>>>>>> # Executable
>>>>>>> #
>>>>>>> %execute %{qemu_cmd} %{qemu_opts_base} %{qemu_opts} -kernel %{test_executable} %{coverage_arg}
>>>>>>>
>>>>>>>
>>>>>>> On Fri, 13 Apr 2018, 18:18 Vijay Kumar Banerjee, <
>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>
>>>>>>>> sure
>>>>>>>>
>>>>>>>> .........
>>>>>>>>
>>>>>>>> #
>>>>>>>> # RTEMS Tools Project (http://www.rtems.org/)
>>>>>>>> # Copyright 2010-2014 Chris Johns (chrisj at rtems.org)
>>>>>>>> # All rights reserved.
>>>>>>>> #
>>>>>>>> # This file is part of the RTEMS Tools package in 'rtems-tools'.
>>>>>>>> #
>>>>>>>> # Redistribution and use in source and binary forms, with or without
>>>>>>>> # modification, are permitted provided that the following
>>>>>>>> conditions are met:
>>>>>>>> #
>>>>>>>> # 1. Redistributions of source code must retain the above copyright
>>>>>>>> notice,
>>>>>>>> # this list of conditions and the following disclaimer.
>>>>>>>> #
>>>>>>>> # 2. Redistributions in binary form must reproduce the above
>>>>>>>> copyright notice,
>>>>>>>> # this list of conditions and the following disclaimer in the
>>>>>>>> documentation
>>>>>>>> # and/or other materials provided with the distribution.
>>>>>>>> #
>>>>>>>> # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
>>>>>>>> CONTRIBUTORS "AS IS"
>>>>>>>> # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
>>>>>>>> TO, THE
>>>>>>>> # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
>>>>>>>> PARTICULAR PURPOSE
>>>>>>>> # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
>>>>>>>> CONTRIBUTORS BE
>>>>>>>> # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
>>>>>>>> OR
>>>>>>>> # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
>>>>>>>> OF
>>>>>>>> # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
>>>>>>>> BUSINESS
>>>>>>>> # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
>>>>>>>> WHETHER IN
>>>>>>>> # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
>>>>>>>> OTHERWISE)
>>>>>>>> # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
>>>>>>>> ADVISED OF THE
>>>>>>>> # POSSIBILITY OF SUCH DAMAGE.
>>>>>>>> #
>>>>>>>>
>>>>>>>> #
>>>>>>>> # QEMU
>>>>>>>> #
>>>>>>>> # Use a qemu command to run the executable in the qemu simulator.
>>>>>>>> #
>>>>>>>>
>>>>>>>> %include %{_configdir}/base.cfg
>>>>>>>> %include %{_configdir}/checks.cfg
>>>>>>>>
>>>>>>>> #
>>>>>>>> # Console.
>>>>>>>> #
>>>>>>>> %define console_stdio
>>>>>>>> %include %{_configdir}/console.cfg
>>>>>>>>
>>>>>>>> #
>>>>>>>> # RTEMS version
>>>>>>>> #
>>>>>>>> %include %{_rtdir}/rtems/version.cfg
>>>>>>>>
>>>>>>>> #
>>>>>>>> # Qemu common option patterns.
>>>>>>>> #
>>>>>>>> #%define qemu_opts_base   -no-reboot -monitor none -serial stdio
>>>>>>>> -nographic
>>>>>>>> #%define qemu_opts_base   -no-reboot -serial null -serial mon:stdio
>>>>>>>> -nographic
>>>>>>>> %define qemu_opts_base  -no-reboot -monitor null -serial stdio
>>>>>>>> -nographic
>>>>>>>> %define qemu_opts_no_net -net none
>>>>>>>> #
>>>>>>>> # Qemu executable
>>>>>>>> #
>>>>>>>> %ifn %{defined bsp_qemu_opts}
>>>>>>>>  %define bsp_qemu_opts %{nil}
>>>>>>>> %endif
>>>>>>>> %define qemu_cmd  qemu-system-%{bsp_arch}
>>>>>>>> %define qemu_opts %{bsp_qemu_opts}
>>>>>>>>
>>>>>>>> #
>>>>>>>> # Executable
>>>>>>>> #
>>>>>>>> %execute %{qemu_cmd} %{qemu_opts} -kernel %{test_executable}
>>>>>>>>
>>>>>>>> -- vijay
>>>>>>>>
>>>>>>>> On 13 April 2018 at 22:19, Cillian O'Donnell <cpodonnell8 at gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> Yeah that's fine but can you just paste the contents here anyway.
>>>>>>>>> I'm not near a laptop and I can't remember which branch your starting from.
>>>>>>>>>
>>>>>>>>> On Fri, 13 Apr 2018, 13:51 Vijay Kumar Banerjee, <
>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> I haven't made any local changes to qemu.cfg
>>>>>>>>>>
>>>>>>>>>> -- vijay
>>>>>>>>>>
>>>>>>>>>> On 13 April 2018 at 11:43, Cillian O'Donnell <
>>>>>>>>>> cpodonnell8 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> No that's the right one. I think it might be something to do
>>>>>>>>>>> with qemu.cfg in rtems-tools then. What's in your qemu.cfg? It's in
>>>>>>>>>>> rtems-tools/tester/rtems/testing
>>>>>>>>>>>
>>>>>>>>>>> On Fri, 13 Apr 2018, 06:39 Vijay Kumar Banerjee, <
>>>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> I manually built qemu from here
>>>>>>>>>>>>
>>>>>>>>>>>> https://github.com/AdaCore/qemu
>>>>>>>>>>>>
>>>>>>>>>>>> I guess this is regular qemu , please send a link for
>>>>>>>>>>>> couverture qemu for manual build.
>>>>>>>>>>>>
>>>>>>>>>>>> -- vijay
>>>>>>>>>>>>
>>>>>>>>>>>> On 12 April 2018 at 22:23, Cillian O'Donnell <
>>>>>>>>>>>> cpodonnell8 at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Ah that's good progress, those .cov files are supposed to be
>>>>>>>>>>>>> generated by couverture-qemu as the test are run. They contain the trace
>>>>>>>>>>>>> data. Are you definitely running couverture-qemu and not regular qemu?
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, 12 Apr 2018, 17:41 Vijay Kumar Banerjee, <
>>>>>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I got the parsing of the coverage from the ini file running ,
>>>>>>>>>>>>>> now I'm getting the following error and warnings .
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Running covoar for score
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/base_sp/base_sp.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/capture/capture.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/cdtest/cdtest.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/fileio/fileio.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/hello/hello.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/iostream/cxx_iostream.
>>>>>>>>>>>>>> exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/loopback/loopback.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/minimum/minimum.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/nsecs/nsecs.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/paranoia/paranoia.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/pppd/pppd.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/ticker/ticker.exe.cov
>>>>>>>>>>>>>> WARNING: Unable to read coverage file
>>>>>>>>>>>>>> /home/lunatic/development/rtems/kernel/leon3/sparc-
>>>>>>>>>>>>>> rtems5/c/leon3/testsuites/samples/unlimited/unlimited.exe.cov
>>>>>>>>>>>>>> ERROR: No information to analyze
>>>>>>>>>>>>>> ***Cleaning tempfiles***
>>>>>>>>>>>>>> error: covoar failure exit code: 1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -- vijay
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 10 April 2018 at 18:10, Vijay Kumar Banerjee <
>>>>>>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I managed to get the tests running with the following two
>>>>>>>>>>>>>>> patches .
>>>>>>>>>>>>>>> Please review them .
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -- vijay
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 9 April 2018 at 15:28, Vijay Kumar Banerjee <
>>>>>>>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Fri, 6 Apr 2018, 02:24 Vijay Kumar Banerjee, <
>>>>>>>>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I tried to solve the empty get in the way shown in the
>>>>>>>>>>>>>>>>> patch , but it doesn't seems to work, I'm getting the following error now
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> RTEMS Testing - Tester, 5 (1ed6e2e64090)
>>>>>>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/
>>>>>>>>>>>>>>>>> rtems/rtems-tools/tester/rtems-test", line 40, in <module>
>>>>>>>>>>>>>>>>>     rt.test.run()
>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/
>>>>>>>>>>>>>>>>> rtems/rtems-tools/tester/rt/test.py", line 303, in run
>>>>>>>>>>>>>>>>>     bsp = config.load(bsp[1], opts)
>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/
>>>>>>>>>>>>>>>>> rtems/rtems-tools/tester/rt/config.py", line 461, in load
>>>>>>>>>>>>>>>>>     return opts.defaults['bsp']
>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/rtems/rtems-tools/rtemstoolkit/macros.py",
>>>>>>>>>>>>>>>>> line 190, in __getitem__
>>>>>>>>>>>>>>>>>     raise IndexError('key: %s' % (key))
>>>>>>>>>>>>>>>>> IndexError: key: bsp
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I still Couldn't figure out why it's happening, when I use
>>>>>>>>>>>>>>>> RawConfigParse , it seems to run nicely though .
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Any Ideas on solving it without using RawConfigParser ?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> -- vijay
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 5 April 2018 at 11:51, Cillian O'Donnell <
>>>>>>>>>>>>>>>>> cpodonnell8 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, 4 Apr 2018, 11:18 Vijay Kumar Banerjee, <
>>>>>>>>>>>>>>>>>> vijaykumar9597 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I got the rtems-test running
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I found that get_item_names(section, err) in
>>>>>>>>>>>>>>>>>>> configuration.py  was returning an empty list to the
>>>>>>>>>>>>>>>>>>> item_names in load(bsp,opts) for config.py this was
>>>>>>>>>>>>>>>>>>> giving out the error mandatory item not found .
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I have attached the patch file .
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> current status :
>>>>>>>>>>>>>>>>>>> rtems-test is running without coverage
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> running coverage gives the following error :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> RTEMS Testing - Tester, 5 (092c569e81ae)
>>>>>>>>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/
>>>>>>>>>>>>>>>>>>> rtems/rtems-tools/tester/rtems-test", line 40, in
>>>>>>>>>>>>>>>>>>> <module>
>>>>>>>>>>>>>>>>>>>     rt.test.run()
>>>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/
>>>>>>>>>>>>>>>>>>> rtems/rtems-tools/tester/rt/test.py", line 310, in run
>>>>>>>>>>>>>>>>>>>     coverage = coverage_get_obj(opts,
>>>>>>>>>>>>>>>>>>> path_to_builddir[1])
>>>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/
>>>>>>>>>>>>>>>>>>> rtems/rtems-tools/tester/rt/test.py", line 230, in
>>>>>>>>>>>>>>>>>>> coverage_get_obj
>>>>>>>>>>>>>>>>>>>     coverage_obj = coverage.coverage_run(opts.defaults,
>>>>>>>>>>>>>>>>>>> path_to_builddir)
>>>>>>>>>>>>>>>>>>>   File "/home/lunatic/development/
>>>>>>>>>>>>>>>>>>> rtems/rtems-tools/tester/rt/coverage.py", line 335, in
>>>>>>>>>>>>>>>>>>> __init__
>>>>>>>>>>>>>>>>>>>     self.report_format = self.config_map['report_
>>>>>>>>>>>>>>>>>>> format'][2]
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This is back to the difference in cfg formats. It's
>>>>>>>>>>>>>>>>>> looking for the last line here
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> https://github.com/cillianodonnell/rtems-tools/
>>>>>>>>>>>>>>>>>> blob/coverage/tester/rtems/testing/bsps/leon3-qemu.mc
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Which is now
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> https://github.com/cillianodonnell/rtems-tools/
>>>>>>>>>>>>>>>>>> blob/ini-update/tester/rtems/testing/bsps/leon3_qemu.ini
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> It's trying to grab the 'html' text so it can trigger the
>>>>>>>>>>>>>>>>>> right section of code in coverage.py
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> It's something just to tell which format we want the
>>>>>>>>>>>>>>>>>> report to output
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Understood , I'll come to that after I manage to get the
>>>>>>>>>>>>>>>>> test running first .
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> TypeError: 'NoneType' object has no attribute
>>>>>>>>>>>>>>>>>>> '__getitem__'
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> -- vijay
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 4 April 2018 at 11:16, Chris Johns <chrisj at rtems.org>
>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On 04/04/2018 06:36, Vijay Kumar Banerjee wrote:
>>>>>>>>>>>>>>>>>>>> > after pulling the ini-update branch from
>>>>>>>>>>>>>>>>>>>> > https://github.com/cillianodonnell/rtems-tools/
>>>>>>>>>>>>>>>>>>>> tree/ini-update
>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Any local changes?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> > I tried running the rtems-test with the following
>>>>>>>>>>>>>>>>>>>> command
>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>> > $HOME/development/rtems/rtems-tools/tester/rtems-test
>>>>>>>>>>>>>>>>>>>> > --rtems-tools=$HOME/development/rtems/5
>>>>>>>>>>>>>>>>>>>> --log=coverage_analysis.log
>>>>>>>>>>>>>>>>>>>> > --rtems-bsp=leon3_qemu --rtems-builddir=$HOME/
>>>>>>>>>>>>>>>>>>>> development/rtems/kernel/leon3
>>>>>>>>>>>>>>>>>>>> > sparc-rtems5/c/leon3/testsuites/samples
>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>> > was getting the KeyError for 'coverage'
>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Please paste the command and output as it appears in
>>>>>>>>>>>>>>>>>>>> the terminal?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> > current status :
>>>>>>>>>>>>>>>>>>>> > the same command gives the error :
>>>>>>>>>>>>>>>>>>>> > "mandatory item not found in bsp section : bsp,"
>>>>>>>>>>>>>>>>>>>> > to make sure I didn't break something , I also tried
>>>>>>>>>>>>>>>>>>>> running from a freshly
>>>>>>>>>>>>>>>>>>>> > downloaded directory as well, it gives the same error.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Did you try running the following command from the top
>>>>>>>>>>>>>>>>>>>> of the source tree:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>  $ grep -r "mandatory item not found" *
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Chris
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20180413/f93774f8/attachment-0002.html>

More information about the devel mailing list