Coldfire 5307 bsp's

[Bill Butler]

Peter,

I too have a BSP for 4.5.0 (ss-3-1-02) if you want to have it let me
know.


Bill Butler
Project Lead
Sr Software Engineer
AIPCOM Inc
(972) 644-2328 (x16)

> -----Original Message-----
> From: Ian Caddy [mailto:ianc at microsol.iinet.net.au]
> Sent: Sunday, July 14, 2002 10:52 PM
> To: siddons at bnl.gov
> Cc: rtems-users at oarcorp.com
> Subject: Re:Coldfire 5307 bsp's
> 
> Hi Peter,
> 
> We are working with the 5307, but currently we are only on the 4.5.0
> release.
> 
> We originally ported over the SBC5307 (originally from David Fiddes)
> from RTEMS4.0 to 4.5.0, but we don't have a board to test this with.
It
> did work in our custom hardware.  Since that time we have ported the
BSP
> over to our custom hardware, but if you want we can give you a copy of
> the SBC5307 BSP for 4.5.0.
> 
> Let me know and we can send you a copy off-line.
> 
> best regards,
> 
> Ian Caddy
> 
> 
> D. Peter Siddons wrote:
> 
> >Hi all,
> >I've seen traffic on the list about bsp's for Coldfire 5307 and 5272
> >boards, but so far nothing has shown up in any of the snapshots. Only
> >the mcf5206elite is there. Does anyone intend to submit something in
> >this area in the near future?
> >Pete.
> >
> >
> >
> --
> 
> ianc at microsol.iinet.net.au
> Microsol (Aust) Pty Ltd
> 
> Phone: (+61) 08 9473 6600
> Fax:   (+61) 08 9473 6699
>