Instructions for building and running RTEMS on the Raspberry Pi

[warm38]

Alan, what a coincidence,  I JUST now received 3 Model A RaspberryPi's
via snailmail before checking my email.

I took a quick breeze through your pages and <ooof!> now I have to go off
to a high speed site and download a ton of stuff (I'm bandwidth limited).

My Linux box died a while back so all I have is a windozeXP environment
for development <sigh> and I need all those tools to work on that (which
means all the downloads for the development environment).

wade in florida

On Fri, 5 Apr 2013 11:37:22 -0400 Alan Cudmore <alan.cudmore at gmail.com>
writes:
Hi,
I wanted to post an announcement over on the Raspberrypi.org forums about
the RTEMS BSP that is in the git head. 


Since it take a little bit of work to get an RTEMS development
environment up and running, I thought I would put together a short
introduction to RTEMS and a set of instructions on getting an RTEMS
environment working for the Raspberry Pi BSP.


The instructions are centered around Ubuntu 12.10 using the RTEMS Source
builder tool, but I have also put up an entry on how to setup the
compiler on Windows 7. 


I have an RTEMS 4.11 development environment working on Ubuntu 12.10 with
the source builder toolchain, on CentOS 6.4 with the RTEMS toolchain
RPMs, and on Windows 7 with the RTEMS Mingw-w64 tools.


The instructions are hosted here:
http://alanstechnotes.blogspot.com/2013/03/rtems-on-raspberry-pi.html



Alan
____________________________________________________________
How to Sleep Like a Rock
Obey this one natural trick to fall asleep and stay asleep all night.
http://thirdpartyoffers.juno.com/TGL3141/515f34e69c46034e6644cst03vuc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/users/attachments/20130405/0e2f67bd/attachment-0001.html>