Creating older RTEMS5 tools

Ian Caddy ianc at goanna.iinet.net.au
Fri Jan 11 08:51:13 UTC 2019


I guess to answer my own question after I have had a bit more of a look 
into this, I assume it would be OK to change the build set?

I am building for the arm platform so it uses the "rtems-default.bset"

On my July 18 system this is:

5/rtems-autotools
devel/expat-2.1.0-1
tools/rtems-binutils-2.30
tools/rtems-gcc-7.3.0-newlib-3.0.0
tools/rtems-gdb-8.0.1-1
tools/rtems-tools-5-1
tools/rtems-kernel-5

On my Dec 18 MSYS2 system it is:

5/rtems-autotools
devel/expat-2.1.0-1
tools/rtems-gdb-8.0.1-1
tools/rtems-binutils-2.31.1
tools/rtems-gcc-7.4.0-newlib-2ab57ad59bc35dafffa69cd4da5e228971de069f
tools/rtems-tools-5-1
tools/rtems-kernel-5

I assume it would be OK to change:

tools/rtems-binutils-2.31.1
tools/rtems-gcc-7.4.0-newlib-2ab57ad59bc35dafffa69cd4da5e228971de069f

back to:

tools/rtems-binutils-2.30
tools/rtems-gcc-7.3.0-newlib-3.0.0

I am going to attempt this, but if there is a better way, I would more 
than happy to try it.

regards,

Ian C.


On 11/01/2019 2:59 pm, Ian Caddy wrote:
> Hi All,
>
> We have progressed with our RTEMS5 project using the imx6ULL, and are 
> getting closer to completing it, but we have been using linux tools 
> since around July18 and now need to create msys2 tools for our customer.
>
> I have created the tools on msys2 around mid-december as they needed 
> gdb earlier, and am only finally getting around to testing the rest of 
> the tools, building our snapshot of RTEMS5 and libbsd.
>
> There have been some changes in the tools between July to December, 
> and I had to do a small tweak to get our snapshot of RTEMS 5 working.
>
> Then I tried to build our July snapshot of libbsd, but this has proven 
> to be a lot more difficult.  I then tried the latest libbsd and am 
> facing different but similar build issues.  Things like <poll.h> need 
> to be <sys/poll.h> and things like that.  Even then this is the 
> standard libbsd and not our custom version which will then need to be 
> put together.
>
> So, I am wondering if it is possible to use the rtems-source-builder 
> to build a particular version of the tools (for example from July 18) 
> that we have been using on linux.
>
> I have the source-builder logs from that time if anyone is interested, 
> or a nudge in the correct direction(I don't know much about 
> source-builder as it normally works straight out of the box!!), to get 
> this sorted?
>
> regards,
>
> Ian Caddy
>
>
> _______________________________________________
> users mailing list
> users at rtems.org
> http://lists.rtems.org/mailman/listinfo/users



More information about the users mailing list