November 2025 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Nov 1 00:43:17 UTC 2025
Ending: Sun Nov 30 18:36:26 UTC 2025
Messages: 442

• Central | Follow-up from "cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF" (#10)   Gedare Bloom ( at gedare)
• Central | spec: Add msg broadcast non-atomicity note to doc (!14)   Gedare Bloom ( at gedare)
• Central | spec: Add msg broadcast non-atomicity note to doc (!14)   Kinsey Moore ( at opticron)
• Documentation | Clarify that message broadcast is non-atomic (!196)   Gedare Bloom ( at gedare)
• Documentation | Clarify that message broadcast is non-atomic (!196)   Gedare Bloom ( at gedare)
• Documentation | GRETH lwIP Documentation (!192)   Kinsey Moore ( at opticron)
• GitLab | Make 7-freebsd-14 the default branch (#115)   Amar Takhar ( at amar)
• GitLab | Make 7-freebsd-14 the default branch (#115)   Amar Takhar ( at amar)
• GitLab | Make 7-freebsd-14 the default branch (#115)   Amar Takhar ( at amar)
• GitLab | Update GitLab 18.3.2 -> 18.5.1 (#116)   Amar Takhar ( at amar)
• Google Summer of Code | Improving the STM32F4 with GPIO, SPI, DMA (#86)   Gautam Agrawal ( at gautamnagrawal)
• Google Summer of Code | Improving the STM32F4 with GPIO, SPI, DMA (#86)   Gautam Agrawal ( at gautamnagrawal)
• Google Summer of Code | Improving the STM32F4 with GPIO, SPI, DMA (#86)   Amar Takhar ( at amar)
• Google Summer of Code | Improving the STM32F4 with GPIO, SPI, DMA (#86)   Vashu Kashyap ( at vashukashyap)
• Legacy Networking | sonic.c: Replace set_vector with rtems_interrupt_catch (!27)   Vijay Banerjee ( at vijay)
• Legacy Networking | sonic.c: Replace set_vector with rtems_interrupt_catch (!27)   Vijay Banerjee ( at vijay)
• Legacy Networking | sonic.c: Replace set_vector with rtems_interrupt_catch (!27)   Vijay Banerjee ( at vijay)
• Legacy Networking | sonic.c: Replace set_vector with rtems_interrupt_catch (!27)   Gedare Bloom ( at gedare)
• Legacy Networking | sonic.c: Replace set_vector with rtems_interrupt_catch (!27)   Vijay Banerjee ( at vijay)
• Legacy Networking | sonic.c: Replace set_vector with rtems_interrupt_catch (!27)   Vijay Banerjee ( at vijay)
• LibBSD | 7-freebsd-14 does not compile for powerpc (beatnik) (#67)   Heinz Junkes ( at junkes)
• LibBSD | 7-freebsd-14 does not compile for powerpc (beatnik) (#67)   Heinz Junkes ( at junkes)
• LibBSD | buildset: Disable DAPP module (!114)   Chris Johns ( at chris)
• LibBSD | buildset: Disable DAPP module (!114)   Chris Johns ( at chris)
• LibBSD | buildset: Disable DAPP module (!114)   Chris Johns ( at chris)
• LibBSD | DAPP module is broken on FreeBSD 14 (#68)   Chris Johns ( at chris)
• LibBSD | DAPP module is broken on FreeBSD 14 (#68)   Chris Johns ( at chris)
• LibBSD | dc net driver crashses on powerpc/mvme2700 (#64)   Chris Johns ( at chris)
• LibBSD | Draft: microblaze: Add in_cksum header and kcu105 buildset (!115)   Sam Price ( at TheSamPrice)
• LibBSD | freebsd/dev/dc: Fix dc driver crash (!113)   Chris Johns ( at chris)
• LibBSD | freebsd/dev/dc: Fix dc driver crash (!113)   Chris Johns ( at chris)
• LibBSD | freebsd/dev/dc: Fix dc driver crash (!113)   Amar Takhar ( at amar)
• LibBSD | libbsd kqueue TCP peer close/reset notifications appear to be lost, maybe due to absence of NOTE_EOF? (#69)   Heinz Junkes ( at junkes)
• LibBSD | microblaze: Add in_cksum header and kcu105 buildset (!115)   Sam Price ( at TheSamPrice)
• LibBSD | Raspberrypi4b: Add Genet Ethernet driver (!106)   Kinsey Moore ( at opticron)
• LibBSD | Raspberrypi4b: Add Genet Ethernet driver (!106)   Ning Yang ( at yangn0)
• LibBSD | RTEMS_POSIX_API must be yes or build will fail (#54)   Chris Johns ( at chris)
• lwIP | lwip: Add missing ACD source file (!31)   Matteo Concas ( at matteo.concas)
• lwIP | lwip: Add missing ACD source file (!31)   Kinsey Moore ( at opticron)
• lwIP | lwip: Add missing ACD source file (!31)   Matteo Concas ( at matteo.concas)
• lwIP | lwip: Add missing ACD source file (!31)   Kinsey Moore ( at opticron)
• lwIP | lwip: Add missing ACD source file (!31)   Kinsey Moore ( at opticron)
• lwIP | lwip: Add missing ACD source file (!31)   Amar Takhar ( at amar)
• lwIP | lwip: Add missing ACD source file (!31)   Kinsey Moore ( at opticron)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Prithvi Tambewagh ( at prithvi77)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Prithvi Tambewagh ( at prithvi77)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Prithvi Tambewagh ( at prithvi77)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Prithvi Tambewagh ( at prithvi77)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Matteo Concas ( at matteo.concas)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Kinsey Moore ( at opticron)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Prithvi Tambewagh ( at prithvi77)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Prithvi Tambewagh ( at prithvi77)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Prithvi Tambewagh ( at prithvi77)
• lwIP | Providing SPARC GRETH NEtwork Driver for lwIP with TX & RX UDP Tests (!29)   Matteo Concas ( at matteo.concas)
• lwIP | rtemslwip: Use better default alignment (!30)   Matteo Concas ( at matteo.concas)
• lwIP | rtemslwip: Use better default alignment (!30)   Matteo Concas ( at matteo.concas)
• lwIP | rtemslwip: Use better default alignment (!30)   Kinsey Moore ( at opticron)
• lwIP | rtemslwip: Use better default alignment (!30)   Kinsey Moore ( at opticron)
• Release | Follow-up from "cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF" (#20)   Gedare Bloom ( at gedare)
• Release | notes/rtems-notes-7.1.md: add set_vector() in API Removals. (!31)   Sunil Hegde ( at sunil-hegde)
• Release | rtems-notes-7.1: updates for EDF priority (!32)   Gedare Bloom ( at gedare)
• Release | rtems-notes-7.1: updates for EDF priority (!32)   Gedare Bloom ( at gedare)
• Release | rtems-notes-7.1: updates for EDF priority (!32)   Gedare Bloom ( at gedare)
• RTEMS Source Builder | 7 and next: Update to binutils 2.45.1 (!195)   Joel Sherrill ( at joel)
• RTEMS Source Builder | 7 and next: Update to binutils 2.45.1 (!195)   Joel Sherrill ( at joel)
• RTEMS Source Builder | 7 and next: Update to binutils 2.45.1 (!195)   Joel Sherrill ( at joel)
• RTEMS Source Builder | 7 and next: Update to binutils 2.45.1 (!195)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | Add catalog support to get sources (!197)   Chris Johns ( at chris)
• RTEMS Source Builder | Add catalog support to get sources (!197)   Chris Johns ( at chris)
• RTEMS Source Builder | Add catalog support to get sources (!197)   Chris Johns ( at chris)
• RTEMS Source Builder | Add file cache support (!198)   Chris Johns ( at chris)
• RTEMS Source Builder | Add file cache support (!198)   Chris Johns ( at chris)
• RTEMS Source Builder | Add file cache support (!198)   Chris Johns ( at chris)
• RTEMS Source Builder | devel/glib-2.80.2.cfg configure check issue (#142)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | Export as JSON the sources details from sb-get-source command (#108)   Chris Johns ( at chris)
• RTEMS Source Builder | Export as JSON the sources details from sb-get-source command (#146)   Chris Johns ( at chris)
• RTEMS Source Builder | fmt: Fix typo (!192)   Amar Takhar ( at amar)
• RTEMS Source Builder | fmt: Fix typo (!192)   Amar Takhar ( at amar)
• RTEMS Source Builder | fmt: Fix typo (!192)   Amar Takhar ( at amar)
• RTEMS Source Builder | fmt: Fix typo (!192)   Amar Takhar ( at amar)
• RTEMS Source Builder | fmt: Fix typo (!192)   Chris Johns ( at chris)
• RTEMS Source Builder | GCC 14/15 missing atomic operation on older cores (#141)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | GCC missing atomic operation on older cores (#141)   Joel Sherrill ( at joel)
• RTEMS Source Builder | GCC missing atomic operation on older cores (#141)   Joel Sherrill ( at joel)
• RTEMS Source Builder | Only support SHA512 hashes (#140)   Chris Johns ( at chris)
• RTEMS Source Builder | Only support SHA512 hashes (#140)   Amar Takhar ( at amar)
• RTEMS Source Builder | Only support SHA512 hashes (#140)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | Only support SHA512 hashes (#140)   Chris Johns ( at chris)
• RTEMS Source Builder | Only support SHA512 hashes (#140)   Chris Johns ( at chris)
• RTEMS Source Builder | Only support SHA512 hashes (#140)   Amar Takhar ( at amar)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Matteo Concas ( at matteo.concas)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Amar Takhar ( at amar)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Joel Sherrill ( at joel)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Matteo Concas ( at matteo.concas)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Amar Takhar ( at amar)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Chris Johns ( at chris)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Amar Takhar ( at amar)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Chris Johns ( at chris)
• RTEMS Source Builder | RISC-V/GCC 15: Newlib is built allowing unaligned accesses (#144)   Amar Takhar ( at amar)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Amar Takhar ( at amar)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Amar Takhar ( at amar)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Chris Johns ( at chris)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | sb-get-sources downloads git repos with --no-download specified (#143)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | sb/download: Add file cache support (!196)   Chris Johns ( at chris)
• RTEMS Source Builder | sb/download: Add file cache support (!196)   Chris Johns ( at chris)
• RTEMS Source Builder | sb/download: Add file cache support (!196)   Chris Johns ( at chris)
• RTEMS Source Builder | sb/download: Add file cache support (!196)   Chris Johns ( at chris)
• RTEMS Source Builder | sis: Pick up fixes for gcc-15 (!193)   Christian Mauderer ( at c-mauderer)
• RTEMS Source Builder | sis: Pick up fixes for gcc-15 (!193)   Joel Sherrill ( at joel)
• RTEMS Source Builder | source-builder/sb: Prevent git downloads in no-download mode (!194)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | source-builder/sb: Prevent git downloads in no-download mode (!194)   Kinsey Moore ( at opticron)
• RTEMS Source Builder | Update to binutils 2.45.1 (#145)   Joel Sherrill ( at joel)
• RTEMS Source Builder | Update to binutils 2.45.1 (#145)   Joel Sherrill ( at joel)
• RTEMS Source Builder | Update to binutils 2.45.1 (#145)   Chris Johns ( at chris)
• RTEMS Source Builder | Update to binutils 2.45.1 (#145)   Chris Johns ( at chris)
• RTEMS Source Builder | Use the RTEMS cache first for downloads (#138)   Chris Johns ( at chris)
• RTEMS Source Builder | Use the RTEMS cache first for downloads (#138)   Chris Johns ( at chris)
• RTEMS Source Builder | Use the RTEMS cache first for downloads (#139)   Chris Johns ( at chris)
• RTEMS Source Builder | Use the RTEMS cache first for downloads (#139)   Matt Rippa ( at mattrippa)
• RTEMS Source Builder | Use the RTEMS cache first for downloads (#139)   Amar Takhar ( at amar)
• RTEMS Source Builder | Use the RTEMS cache first for downloads (#139)   Chris Johns ( at chris)
• RTEMS Tools | Draft: Add KCU105 MicroBlaze runner assets for both hardware, and for qemu. (!75)   Sam Price ( at TheSamPrice)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Joel Sherrill ( at joel)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Amar Takhar ( at amar)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Amar Takhar ( at amar)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Amar Takhar ( at amar)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Amar Takhar ( at amar)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Prashant Rahul ( at prashantrahul141)
• RTEMS Tools | feat: Rewrite rtems-bin2c.c in python (!74)   Amar Takhar ( at amar)
• RTEMS | Address type-limits warnings (!853)   Joel Sherrill ( at joel)
• RTEMS | Address type-limits warnings (!853)   Joel Sherrill ( at joel)
• RTEMS | Address type-limits warnings (!853)   Joel Sherrill ( at joel)
• RTEMS | Address type-limits warnings (!853)   Kinsey Moore ( at opticron)
• RTEMS | Backport "bsps/shared: Add XNandPsu flashdev backend" (#5397)   Kinsey Moore ( at opticron)
• RTEMS | Backport JFFS2 CRC32 updates (#5396)   Kinsey Moore ( at opticron)
• RTEMS | Backport to 6 branch: "cpukit/jffs2: Add EBS (erase block summary) support" (#5398)   Kinsey Moore ( at opticron)
• RTEMS | Backport to 6 branch: "Fixes for flashdev API and xqspi support" (#5392)   Kinsey Moore ( at opticron)
• RTEMS | Backport to 6 branch: "Fixes for flashdev API and xqspi support" (#5392)   Kinsey Moore ( at opticron)
• RTEMS | bsp/microblaze-fpga: add AXI GPIO driver (!844)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: add AXI GPIO driver (!844)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: add AXI GPIO driver (!844)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Kinsey Moore ( at opticron)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Kinsey Moore ( at opticron)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Kinsey Moore ( at opticron)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Kinsey Moore ( at opticron)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Kinsey Moore ( at opticron)
• RTEMS | bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Joel Sherrill ( at joel)
• RTEMS | bsp/microblaze-fpga: parameterize linker layout (!842)   Sam Price ( at TheSamPrice)
• RTEMS | bsp/microblaze-fpga: parameterize linker layout (!842)   Kinsey Moore ( at opticron)
• RTEMS | bsp/microblaze-fpga: parameterize linker layout (!842)   Kinsey Moore ( at opticron)
• RTEMS | bsps/arm/xilinx-zynq/start/bspsmp.c: fix unused parameter warning (!822)   Michal Lenc ( at michallenc)
• RTEMS | bsps/arm/xilinx-zynq/start/bspsmp.c: fix unused parameter warning (!822)   Michal Lenc ( at michallenc)
• RTEMS | bsps/arm/xilinx-zynq/start/bspsmp.c: fix unused parameter warning (!822)   Gedare Bloom ( at gedare)
• RTEMS | bsps/arm/xilinx-zynq/start/bspsmp.c: fix unused parameter warning (!822)   Michal Lenc ( at michallenc)
• RTEMS | bsps/arm/xilinx-zynq/start/bspsmp.c: fix unused parameter warning (!822)   Michal Lenc ( at michallenc)
• RTEMS | bsps/arm/xilinx-zynq/start/bspsmp.c: fix unused parameter warning (!822)   Kinsey Moore ( at opticron)
• RTEMS | bsps/ Correct comparisons of different signedness (!827)   Joel Sherrill ( at joel)
• RTEMS | bsps/ Correct comparisons of different signedness (!827)   Joel Sherrill ( at joel)
• RTEMS | bsps/ Correct comparisons of different signedness (!827)   Joel Sherrill ( at joel)
• RTEMS | bsps/ Correct comparisons of different signedness (!827)   Kinsey Moore ( at opticron)
• RTEMS | bsps/i386/pc386: Rename breakpoint() to avoid conflict with external symbols (!798)   Gedare Bloom ( at gedare)
• RTEMS | bsps/i386/pc386: Rename breakpoint() to avoid conflict with external symbols (!798)   Kinsey Moore ( at opticron)
• RTEMS | bsps/i386/pc386: Rename breakpoint() to avoid conflict with external symbols (!798)   Kinsey Moore ( at opticron)
• RTEMS | bsps/i386/pc386: Rename breakpoint() to avoid conflict with external symbols (!798)   Kinsey Moore ( at opticron)
• RTEMS | bsps/microblaze: Fix uartlite last_close args (!837)   Sam Price ( at TheSamPrice)
• RTEMS | bsps/microblaze: Fix uartlite last_close args (!837)   Sam Price ( at TheSamPrice)
• RTEMS | bsps/microblaze: Fix uartlite last_close args (!837)   Sam Price ( at TheSamPrice)
• RTEMS | bsps/powerpc: Fix ppc_exc_interrupt not saving extended parts of r3 correctly (!824)   Thomas Wucher ( at thomaswucher)
• RTEMS | bsps/powerpc: Fix ppc_exc_interrupt not saving extended parts of r3 correctly (!824)   Thomas Wucher ( at thomaswucher)
• RTEMS | bsps/powerpc: Fix ppc_exc_interrupt not saving extended parts of r3 correctly (!824)   Amar Takhar ( at amar)
• RTEMS | bsps/shared/dev/flash: Add a flashdev simulation backend (!799)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared/dev/flash: Add a flashdev simulation backend (!799)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared/dev/flash: Add a flashdev simulation backend (!799)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared/dev/nor: Add SFDP and CFI parsers (!823)   Aaron Nyholm ( at eagleirony)
• RTEMS | bsps/shared/dev/nor: Add SFDP and CFI parsers (!823)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared/dev/nor: Add SFDP and CFI parsers (!823)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared/dev/nor: Add SFDP and CFI parsers (!823)   Aaron Nyholm ( at eagleirony)
• RTEMS | bsps/shared/dev/nor: Add SFDP and CFI parsers (!823)   Gedare Bloom ( at gedare)
• RTEMS | bsps/shared/grlib/amba/ambapp_names.c: Address sign comparison warnings (!859)   Joel Sherrill ( at joel)
• RTEMS | bsps/shared/grlib/amba/ambapp_names.c: Address sign comparison warnings (!859)   Joel Sherrill ( at joel)
• RTEMS | bsps/shared/grlib/amba/ambapp_names.c: Address sign comparison warnings (!859)   Joel Sherrill ( at joel)
• RTEMS | bsps/shared/xqspi_flash.c: Add support for sector information (!830)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared/xqspi_flash.c: Add support for sector information (!830)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!849)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!849)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!849)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!849)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!849)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!849)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!850)   Kinsey Moore ( at opticron)
• RTEMS | bsps/shared: Add XNandPsu flashdev backend (!850)   Kinsey Moore ( at opticron)
• RTEMS | CORE_message_queue_Send timeout failure (#3986)   Sepehr Ganji ( at Sepehr)
• RTEMS | Coverity Issues in fatfs code (#5400)   Sepehr Ganji ( at Sepehr)
• RTEMS | Coverity Issues in fatfs code (#5400)   Joel Sherrill ( at joel)
• RTEMS | Coverity Issues in fatfs code (#5400)   Sepehr Ganji ( at Sepehr)
• RTEMS | cpukit,spec: Swap JFFS2 to zlib CRC32 (!847)   Kinsey Moore ( at opticron)
• RTEMS | cpukit,spec: Swap JFFS2 to zlib CRC32 (!847)   Kinsey Moore ( at opticron)
• RTEMS | cpukit,spec: Swap JFFS2 to zlib CRC32 (!847)   Kinsey Moore ( at opticron)
• RTEMS | cpukit,spec: Swap JFFS2 to zlib CRC32 (!848)   Kinsey Moore ( at opticron)
• RTEMS | cpukit,spec: Swap JFFS2 to zlib CRC32 (!848)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/close.c: Open flag corrected for busy closes (!796)   Gedare Bloom ( at gedare)
• RTEMS | cpukit/close.c: Open flag corrected for busy closes (!796)   Gedare Bloom ( at gedare)
• RTEMS | cpukit/jffs2: Add EBS (erase block summary) support (!851)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/jffs2: Add EBS (erase block summary) support (!851)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/jffs2: Add EBS (erase block summary) support (!851)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/jffs2: Add erase block summary (EBS) support (!852)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/jffs2: Add erase block summary (EBS) support (!852)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/libdebugger: Address clobbered warnings (!820)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/libdebugger: Address clobbered warnings (!820)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/libdebugger: Address clobbered warnings (!820)   Chris Johns ( at chris)
• RTEMS | cpukit/libdebugger: Address clobbered warnings (!820)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/libdebugger: Address clobbered warnings (!820)   Kinsey Moore ( at opticron)
• RTEMS | cpukit/libdebugger: Address clobbered warnings (!820)   Amar Takhar ( at amar)
• RTEMS | cpukit: Add msg broadcast non-atomicity to doc (!810)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Add msg broadcast non-atomicity to doc (!810)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Kinsey Moore ( at opticron)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Correct comparisons of different signedness (!826)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Joel Sherrill ( at joel)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Gedare Bloom ( at gedare)
• RTEMS | cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF (!831)   Joel Sherrill ( at joel)
• RTEMS | Draft: bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Joel Sherrill ( at joel)
• RTEMS | Draft: bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Sam Price ( at TheSamPrice)
• RTEMS | Draft: bsp/microblaze-fpga: expose 2nd AXI timer clock (!840)   Sam Price ( at TheSamPrice)
• RTEMS | Draft: confdefs: Improve CONFIGURE_MAXIMUM_PRIORITY (!436)   Gedare Bloom ( at gedare)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Sam Price ( at TheSamPrice)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Sam Price ( at TheSamPrice)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Sam Price ( at TheSamPrice)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Chris Johns ( at chris)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Chris Johns ( at chris)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Chris Johns ( at chris)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Chris Johns ( at chris)
• RTEMS | Draft: Feature/rtl libdl enhancements (!846)   Chris Johns ( at chris)
• RTEMS | Draft: libi2c: Use RTEMS thread API and support initialization at device driver level (!821)   Vijay Banerjee ( at vijay)
• RTEMS | Draft: libi2c: Use RTEMS thread API and support initialization at device driver level (!821)   Vijay Banerjee ( at vijay)
• RTEMS | Draft: sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Kinsey Moore ( at opticron)
• RTEMS | Draft: sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | Draft: sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | EDF scheduler API support needs to be limited to a base range (#5390)   Chris Johns ( at chris)
• RTEMS | EDF scheduler API support needs to be limited to a base range (#5390)   Chris Johns ( at chris)
• RTEMS | EDF scheduler API support needs to be limited to a base range (#5390)   Sebastian Huber ( at sebhub)
• RTEMS | EDF scheduler API support needs to be limited to a base range (#5390)   Chris Johns ( at chris)
• RTEMS | EDF scheduler API support needs to be limited to a base range (#5390)   Chris Johns ( at chris)
• RTEMS | EDF scheduler API support needs to be limited to a base range (#5390)   Joel Sherrill ( at joel)
• RTEMS | Ensure -msoft-float is seen in linking via make (!825)   Martin Werner ( at martinerikwerner)
• RTEMS | Ensure -msoft-float is seen in linking via make (!825)   Martin Werner ( at martinerikwerner)
• RTEMS | Ensure -msoft-float is seen in linking via make (!825)   Joel Sherrill ( at joel)
• RTEMS | Ensure -msoft-float is seen in linking via make (!825)   Martin Werner ( at martinerikwerner)
• RTEMS | Ensure -msoft-float is seen in linking via make (!825)   Joel Sherrill ( at joel)
• RTEMS | FIX: The ZYNQMP_RPU_CORE_INDEX macro is undefined in the code, making... (!858)   Joao Luiz Borges ( at joaoborges98)
• RTEMS | FIX: The ZYNQMP_RPU_CORE_INDEX macro is undefined in the code, making... (!858)   Kinsey Moore ( at opticron)
• RTEMS | Fixes for flashdev API and xqspi support (!829)   Kinsey Moore ( at opticron)
• RTEMS | Fixes for flashdev API and xqspi support (!829)   Kinsey Moore ( at opticron)
• RTEMS | Fixes for flashdev API and xqspi support (!829)   Kinsey Moore ( at opticron)
• RTEMS | Fixes for flashdev API and xqspi support (!829)   Chris Johns ( at chris)
• RTEMS | Fixes for flashdev API and xqspi support (!830)   Chris Johns ( at chris)
• RTEMS | Fix printf() format specifier warnings (!833)   Joel Sherrill ( at joel)
• RTEMS | Fix printf() format specifier warnings (!833)   Joel Sherrill ( at joel)
• RTEMS | Fix printf() format specifier warnings (!833)   Joel Sherrill ( at joel)
• RTEMS | Fix unused parameter warnings (!856)   Joel Sherrill ( at joel)
• RTEMS | Fix unused parameter warnings (!856)   Joel Sherrill ( at joel)
• RTEMS | Fix unused parameter warnings (!856)   Joel Sherrill ( at joel)
• RTEMS | Fix various enum conversion warnings (!834)   Joel Sherrill ( at joel)
• RTEMS | Fix various enum conversion warnings (!834)   Joel Sherrill ( at joel)
• RTEMS | Fix various enum conversion warnings (!834)   Joel Sherrill ( at joel)
• RTEMS | Flashdev API returns 0 if a callback is not implemented (#5391)   Kinsey Moore ( at opticron)
• RTEMS | Flashdev API returns 0 if a callback is not implemented (#5391)   Kinsey Moore ( at opticron)
• RTEMS | Flashdev API returns 0 if a callback is not implemented (#5391)   Chris Johns ( at chris)
• RTEMS | Follow-up from "cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF" (#5394)   Gedare Bloom ( at gedare)
• RTEMS | Follow-up from "cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF" (#5394)   Amar Takhar ( at amar)
• RTEMS | Follow-up from "cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF" (#5395)   Gedare Bloom ( at gedare)
• RTEMS | Follow-up from "cpukit: Use CONFIGURE_MAXIMUM_PRIORITY with EDF" (#5395)   Amar Takhar ( at amar)
• RTEMS | Initializing network (libbsd) issue on 6-freebsd-12 powerpc beatnik (#5386)   Heinz Junkes ( at junkes)
• RTEMS | Initializing network (libbsd) issue on 6-freebsd-12 powerpc beatnik (#5386)   Heinz Junkes ( at junkes)
• RTEMS | Initializing network (libbsd) issue on 6-freebsd-12 powerpc beatnik (#5386)   Heinz Junkes ( at junkes)
• RTEMS | Initializing network (libbsd) issue on 6-freebsd-12 powerpc beatnik (#5386)   Chris Johns ( at chris)
• RTEMS | ino_t needs a printf() specifier macro (#5393)   Joel Sherrill ( at joel)
• RTEMS | ino_t printf() cases: Add PRIdinod_t for ino_t format specifier (!832)   Joel Sherrill ( at joel)
• RTEMS | ino_t printf() cases: Add PRIdinod_t for ino_t format specifier (!832)   Joel Sherrill ( at joel)
• RTEMS | ino_t printf() cases: Add PRIdinod_t for ino_t format specifier (!832)   Joel Sherrill ( at joel)
• RTEMS | jffs2: restore upstream GC return value (!839)   Sam Price ( at TheSamPrice)
• RTEMS | jffs2: restore upstream GC return value (!839)   Sam Price ( at TheSamPrice)
• RTEMS | libfs/fatfs: Update FatFS to R0.16 (!855)   Sepehr Ganji ( at Sepehr)
• RTEMS | libfs/fatfs: Update FatFS to R0.16 (!855)   Sepehr Ganji ( at Sepehr)
• RTEMS | libfs/fatfs: Update FatFS to R0.16 (!855)   Kinsey Moore ( at opticron)
• RTEMS | libi2c: Use RTEMS thread API and support initialization at device driver level (!821)   Gedare Bloom ( at gedare)
• RTEMS | libi2c: Use RTEMS thread API and support initialization at device driver level (!821)   Kinsey Moore ( at opticron)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Chris Johns ( at chris)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Chris Johns ( at chris)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Chris Johns ( at chris)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Chris Johns ( at chris)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze/cpukit/cpuuse: add max cpu / bt support (!843)   Kinsey Moore ( at opticron)
• RTEMS | microblaze: add AXI timer benchmark support (!838)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: add AXI timer benchmark support (!838)   Kinsey Moore ( at opticron)
• RTEMS | microblaze: add AXI timer benchmark support (!838)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: add AXI timer benchmark support (!838)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: add AXI timer benchmark support (!838)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: add AXI timer benchmark support (!838)   Kinsey Moore ( at opticron)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Kinsey Moore ( at opticron)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Kinsey Moore ( at opticron)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Sam Price ( at TheSamPrice)
• RTEMS | microblaze: enhance exception diagnostics (!841)   Kinsey Moore ( at opticron)
• RTEMS | MicroBlaze interrupts cleanup before enabling MER (!845)   Sam Price ( at TheSamPrice)
• RTEMS | MicroBlaze interrupts cleanup before enabling MER (!845)   Sam Price ( at TheSamPrice)
• RTEMS | MicroBlaze interrupts cleanup before enabling MER (!845)   Sam Price ( at TheSamPrice)
• RTEMS | MicroBlaze interrupts cleanup before enabling MER (!845)   Sam Price ( at TheSamPrice)
• RTEMS | MicroBlaze RTL: handle MB 33 and add rtl log (!857)   Sam Price ( at TheSamPrice)
• RTEMS | MicroBlaze RTL: handle MB 33 and add rtl log (!857)   Amar Takhar ( at amar)
• RTEMS | MicroBlaze RTL: handle MB 33 and add rtl log (!857)   Amar Takhar ( at amar)
• RTEMS | MVME3100 libi2c initialization is broken (#5387)   Vijay Banerjee ( at vijay)
• RTEMS | noelv: DTB parsing is broken (#5383)   Matteo Concas ( at matteo.concas)
• RTEMS | noelv: DTB parsing is broken (#5383)   Matteo Concas ( at matteo.concas)
• RTEMS | noelv: DTB parsing is broken (#5383)   Kinsey Moore ( at opticron)
• RTEMS | noelv: DTB parsing is broken (#5383)   Matteo Concas ( at matteo.concas)
• RTEMS | noelv: DTB parsing is broken (#5383)   Matteo Concas ( at matteo.concas)
• RTEMS | noelv: DTB parsing is broken (#5383)   Matteo Concas ( at matteo.concas)
• RTEMS | noelv: DTB parsing is broken (#5383)   Kinsey Moore ( at opticron)
• RTEMS | noelv: DTB parsing is broken (#5383)   Kinsey Moore ( at opticron)
• RTEMS | noelv: DTB parsing is broken (#5383)   Kinsey Moore ( at opticron)
• RTEMS | noelv: DTB parsing is broken (#5383)   Kinsey Moore ( at opticron)
• RTEMS | noelv: DTB parsing is broken (#5383)   Matteo Concas ( at matteo.concas)
• RTEMS | noelv: DTB parsing is broken (#5383)   Matteo Concas ( at matteo.concas)
• RTEMS | noelv: DTB parsing is broken (#5383)   Kinsey Moore ( at opticron)
• RTEMS | noelv: DTB parsing is broken (#5383)   Kinsey Moore ( at opticron)
• RTEMS | PowerPC QorIQ BSP does not correctly save/restore r3 on interrupt when SPE is enabled (#5389)   Thomas Wucher ( at thomaswucher)
• RTEMS | PowerPC QorIQ BSP does not correctly save/restore r3 on interrupt when SPE is enabled (#5389)   Thomas Wucher ( at thomaswucher)
• RTEMS | PowerPC QorIQ BSP does not correctly save/restore r3 on interrupt when SPE is enabled (#5389)   Amar Takhar ( at amar)
• RTEMS | RISC-V implementation does not support Smdbltrp extension (#5274)   Matteo Concas ( at matteo.concas)
• RTEMS | RISC-V implementation does not support Smdbltrp extension (#5274)   Matteo Concas ( at matteo.concas)
• RTEMS | RISC-V implementation does not support Smdbltrp extension (#5274)   Lucian Silistru ( at lsilistr)
• RTEMS | RISC-V implementation does not support Smdbltrp extension (#5274)   Matteo Concas ( at matteo.concas)
• RTEMS | RISC-V implementation does not support Smdbltrp extension (#5274)   Lucian Silistru ( at lsilistr)
• RTEMS | RISC-V implementation does not support Smdbltrp extension (#5274)   Matteo Concas ( at matteo.concas)
• RTEMS | riscv start.S for a single core on a multicore device (#4735)   Amar Takhar ( at amar)
• RTEMS | riscv start.S for a single core on a multicore device (#4735)   Chris Johns ( at chris)
• RTEMS | rtems-libbsd/testsuite/selectpollkqueue01 fails on powerpc RTEMS7 (#5401)   Heinz Junkes ( at junkes)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Kinsey Moore ( at opticron)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Joel Sherrill ( at joel)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Kinsey Moore ( at opticron)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | sparc: Remove redundant 'register' specifier from cpuimpl.h (!835)   Karthikey Kadati ( at karthikey_kadati)
• RTEMS | spec/../*yml: Add fatfs tests to multiple BSP test excludes (!836)   Joel Sherrill ( at joel)
• RTEMS | spec/../*yml: Add fatfs tests to multiple BSP test excludes (!836)   Joel Sherrill ( at joel)
• RTEMS | spec/../*yml: Add fatfs tests to multiple BSP test excludes (!836)   Joel Sherrill ( at joel)
• RTEMS | spec/../*yml: Add fatfs tests to multiple BSP test excludes (!836)   Kinsey Moore ( at opticron)
• RTEMS | spec/../*yml: Add fatfs tests to multiple BSP test excludes (!836)   Kinsey Moore ( at opticron)
• RTEMS | spec/../*yml: Add fatfs tests to multiple BSP test excludes (!836)   Joel Sherrill ( at joel)
• RTEMS | spec/../*yml: Add fatfs tests to multiple BSP test excludes (!836)   Joel Sherrill ( at joel)
• RTEMS | testsuites/.../tc-timecounter-install.c: Address << of negative value (!854)   Joel Sherrill ( at joel)
• RTEMS | testsuites/.../tc-timecounter-install.c: Address << of negative value (!854)   Joel Sherrill ( at joel)
• RTEMS | testsuites/.../tc-timecounter-install.c: Address << of negative value (!854)   Joel Sherrill ( at joel)
• RTEMS | testsuites/fstests/fsclose01: Fix expected flags (!811)   Gedare Bloom ( at gedare)
• RTEMS | testsuites/fstests/fsclose01: Fix expected flags (!811)   Gedare Bloom ( at gedare)
• RTEMS | testsuites/validation: regenerate unused variable changes (!770)   Gedare Bloom ( at gedare)
• RTEMS | testsuites: Correct comparisons of different signedness (!828)   Joel Sherrill ( at joel)
• RTEMS | testsuites: Correct comparisons of different signedness (!828)   Joel Sherrill ( at joel)
• RTEMS | testsuites: Correct comparisons of different signedness (!828)   Kinsey Moore ( at opticron)
• RTEMS | testsuites: Correct comparisons of different signedness (!828)   Joel Sherrill ( at joel)
• RTEMS | Update FatFS to the latest (#5399)   Sepehr Ganji ( at Sepehr)
• RTEMS | Waranings in cpukit dev/can (#5388)   Joel Sherrill ( at joel)
• RTEMS | Wclobbered warnings (#5364)   Kinsey Moore ( at opticron)
• SIS | Draft: Make compilable with gcc-15 (!7)   Christian Mauderer ( at c-mauderer)
• SIS | Make compilable with gcc-15 (!7)   Gedare Bloom ( at gedare)

Last message date: Sun Nov 30 18:36:26 UTC 2025
Archived on: Sun Nov 30 18:36:26 UTC 2025

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...